Рет қаралды 3,038
Use the Tube command to create a single solid body by sweeping a circular cross section along a centerline path with options for outer and inner diameter. You can create wire bundles, harnesses, tubing, cabling, or piping components with this command.
Tube options
- Select cuver: can select path by multiple curves or edges.
- Outer Diameter: Specifies the value for the outer diameter of the tube.
- Inner Diameter: Specifies the value for the inner diameter of the tube.
- Single Segment: Creates one face for the portion of the path containing a spline or conic. The surfaces are B-surfaces.
- Multiple Segments: Approximates the tube surface with a series of cylindrical and toroidal faces. These are determined by approximating the path with straight lines and arcs using the value specified in Tolerance.
- Tolerance: Specifies a distance tolerance. This is the maximum distance between the input geometry and the centerline of the resulting body.
🔜Please SUBSCRIBE to update more new videos: www.youtube.co...
FOR MORE TUTORIALS
🔸 Siemens NX Modeling Tutorials playlist:
• Siemens NX Modeling tu...
🔸 Siemens NX CAM Tutorials playlist:
• Full NX CAM Tutorials
🔸 Siemens NX Drafting Tutorials playlist:
• Siemens NX Drafting Tu...
-------------------------------------------------------------
🔸 Siemens Solid Edge Design Tutorials:
• Solid Edge Design Tuto...
🔸 Siemens Solid Edge Assembly Tutorials:
• Full Solid Edge Assemb...
🔸 Siemens Solid Edge Sheet Metal Tutorials:
• Solid Edge Sheet Metal
🔸 Siemens Solid Edge Drafting Tutorials:
• Solid Edge Drafting Tu...
-------------------------------------------------------------
🔸 Full of Mechanical Mechanism Assembly & Animation in Solid Edge: • Full of Mechanism Asse...
🔸 Full of Mechanical Mechanism Animation:
• Mechanical Mechanism A...
-------------------------------------------------------------------------------------------
🏠 4CTECH VIET NAM TECHNOLOGY COMPANY LIMITED
🏗 Consulting and Providing CAD CAM software solutions in Vietnam
☎ Contact us: Phone: + 84 968 023 855 | Email: sales@4ctech.vn
📡 Website: www.4ctech.vn * www.4ctech.com.vn
-------------------------------------------------------------------------------------------
#SiemensNXtutorials #NXModeling #TubeCommand