Please, use my referral link if you decided to get the board, thank you♥️: sikakeyb.com/products/sikakeyb-castle-hm66-66key-magnetic-keyboard?DIST=REY%3D
@juanramimona3 сағат бұрын
Hi, question Does this have per key RGB (meaning you can change each key color separately) Thinking of buying this since it's a 60% with arrow keys
@paulotakahamaАй бұрын
Hi! What is the scan rate, besides the 8k polling rate?
@Kokos_Gadgets29 күн бұрын
in keyboard inspector program the scanrate spikes up into 3545hz for me. changing the binning rate to 16000hz its peaking on 8000hz. I was saw somewhere with the appropiate tools, the accurate scanrate has been around 5-6k
@realklee20 күн бұрын
Does your antivirus flag the keyboard software? My Windows Defender and Malwarebytes both flag it, as well as VirusTotal.
@Kokos_Gadgets20 күн бұрын
It has to be false positive. Don't have windows defender on my system, so on mine nothing of these messages pops up. But I looked into the behavior of the application when its running and to my understanding it doesn't seem to make any harmful or bad thing that we book the entire thing as a virus. Some Japanese retailer mentioned the same thing that the defender can flag the app so I think we safe, like for real, why wouldn't we be?...
@YosoyLobo5037 күн бұрын
did you ever figure it out ?
@monteking1554Ай бұрын
better than wooting 60he?
@Kokos_GadgetsАй бұрын
@@monteking1554 yes, this one performs better
@Kokos_GadgetsАй бұрын
my only real complain about is, it doesnt have web based software
@monteking1554Ай бұрын
@@matthewcarvajal6152 cool, im selling my wooting
@uputkuАй бұрын
@@matthewcarvajal6152is has snap tap?
@yumibiteАй бұрын
hii wat cable is that. not really knowledged on coiled cables but does that work for this keyboard?
@Kokos_GadgetsАй бұрын
@@yumibite it should work with any cable, you just dont wanna buy longer than 1.5m. so the cable I have(its out of stock right now): a.aliexpress.com/_EIjEiDl
@DroplitzАй бұрын
Can u experience any switch deactuation when u bottom out keys and moving finger around keycap without lifting finger on really low settings of rapid trigger like 0.02 ?
@Kokos_GadgetsАй бұрын
If you ridiculosly hard press on the bottom which is wouldnt likely to be happen, then its going to cut off the keys sometimes. 0.01mm is indeed not safe in any scenario, but literally tested this in the quarter of the video with the set of 0.02 reset point
@DroplitzАй бұрын
@@Kokos_Gadgets thanks for answer, i was curious about this cuz wooting says that it is impossible to anything below 0.15mm to work properly without missed inputs, now i feel like they not so honest or just afraid to admit that some other product better than theirs in this term
@Kokos_GadgetsАй бұрын
@@Droplitz Woow, good to know this. But yeah for me, how I play the games completely fine on 0.02~0.03mm. Once again you just dont wanna press on hard like you wanna break the keyboard, and it will be ok.
@Kokos_GadgetsАй бұрын
@@Droplitz and it has the rappsnappy function before wooting actually released it. I can only love this thing ⌨️😎
@Kokos_GadgetsАй бұрын
@@Droplitz but you might wanna forget the macros, since in this software I dont really seems to find anything about, making something like a complex thing with button presses, setting delays between and so on
@AiAlice_Ай бұрын
Where did you purchase this? I've seen people purchase it on Aliexpress for cheaper, but I'm unsure how legit is that. Unfortunately they don't sell this just as a module, wish they did that since they sell the other ones.
@Kokos_GadgetsАй бұрын
@@AiAlice_ Ive purchased it on day 0 release from sikakeyb.com, it was 189$, but after a day they changed it to 230$, so it became the most expensive to get from them.
@AiAlice_Ай бұрын
@@Kokos_Gadgets Yeah it's abt 180 ish on Aliexpress. Sikakey is much more reliable but ugh, 50 dollars is not a little amount
@NewBindsNewSensNewDpi13 күн бұрын
yo will you have to pay customs fees when ordering from France? can we set the polling rate to 8k to 2k 4k? And are the settings saved in the keyboard and kept when closing the software?
@Kokos_Gadgets13 күн бұрын
I live in Europe and there was no additional fees, its just came to me normally after ordering it. There is no option for changing to polling rate, its on a fixed 8k. And the keyboard can save anything into the memory chip, even different profiles which you can swap between(without the software needed).
@NewBindsNewSensNewDpi13 күн бұрын
@@Kokos_Gadgets Okay thank you, and for the 8k polling rate I have an average PC that doesn't reduce the fps and processor usage too much?
@paulotakahama13 күн бұрын
@@NewBindsNewSensNewDpi no it does not, because keyboards are not demanding compared to a mouse.
@Kokos_Gadgets13 күн бұрын
@@NewBindsNewSensNewDpi It will not be as demanding since the polling only works when you pressing the key in contrast of what mouses doing when you constantly sending data into pc. I think, you will don't want to worry about this, but it is recommended to use at least windows 11 since microsoft fixed some of the higher polling issues which caused fps spikes before.
@NewBindsNewSensNewDpi13 күн бұрын
@@Kokos_Gadgets my config is not powerful enough to run windows 11, do you think that the Shikakeysb ck75 is a good choice I currently have a wooting but I am hesitating between the shikakeysb the backspace oasis 75 and the iqunix ez63
@Nines67123 күн бұрын
Hey, I have a few questions. does this keyboard includes a cable, and does it have onboard memory? Can I just set everything and delete their app or need it to be running all the time?
@Kokos_Gadgets23 күн бұрын
Yes, it has a stiff, braided type-c to type-c cable with an usb-a adapter. And it has onboard memory so rgb, rapid trigger settings, everything can be saved permanently to the keyboard. Even you can make custom profiles with different set of actuations, so with the specific key you can swap them between comfortably, all that without the software needed.
@Nines67123 күн бұрын
Oh, nice to hear, guess it solves the issue of not having web-app available. Gonna order it right now, thank you for response.
@Ninja-qi5td23 күн бұрын
what is this name of the cable u have ?
@Kokos_Gadgets23 күн бұрын
a.aliexpress.com/_EIjEiDl
@Ninja-qi5td23 күн бұрын
@@Kokos_Gadgetsthx
@deft72 күн бұрын
Is it real 8k polling rate. Did u try iqunix ez60/63 and is it a real 8k ?
@Kokos_Gadgets2 күн бұрын
they both have real 8k(tested with the right tools), however the hm66 is more accurate, a bit more stable and has less deadzone, also the actuation point can be set to 0.01mm with, compare to what iqunix have with their lowest 0.05mm values(not that much of a diff tho)
@deft72 күн бұрын
@@Kokos_Gadgets so i get the lowest price
@Kokos_Gadgets2 күн бұрын
@@deft7 just get the sikakeyb hm66, it has better performance than the iqunix ez60/63
@deft72 күн бұрын
@@Kokos_Gadgets ok but i need to change the keybind 😂
@wokeux24 күн бұрын
do you know if this is compatible with tofu 60 or alumaze?
@Kokos_Gadgets24 күн бұрын
tofu redux's is compatible with it, in theory every gh60 case, but there is some which dont have the usb port on the exact right place. So you have to be careful with this.
@wokeux24 күн бұрын
@@Kokos_Gadgets got it, thank you for the answer!
@synex66625 күн бұрын
hi now this keybord have a SOCD/SNAP TAP MODE?
@Kokos_Gadgets25 күн бұрын
So I figured it out: the hm socd works like wooting rappysnappy, and the hm cover function works as the wooting socd/snap tap
@synex66625 күн бұрын
@@Kokos_Gadgets I just bought this keyboard and although I watched a lot of review videos, no one opened the socd slot. Thank you for the information.
@synex66622 күн бұрын
@@Kokos_Gadgets It says 8000hz capacity. Is this the cable capacity that comes with it or is my computer bad? It only shows 1000hz. While it was classified on the test sites, it was available on the ground. Where is 8000hz?
@Kokos_Gadgets22 күн бұрын
@@synex666 higher polling was never be able to measure on some random websites, so dont expect that. You need to have a latency tool to know how it performs, or use the keyboard inspector program, set the binning rate to 16000, and you can see there its running on 8k
@TUB3R4FUN11 күн бұрын
Wooting 60he or hm66? For fps games like cs/val
@TUB3R4FUN11 күн бұрын
Socd on this keeb is good as on wooting/razer?
@Kokos_Gadgets10 күн бұрын
@@TUB3R4FUN definitely get the hm, it has way less deadzone and also it is faster(8k polling). The socd works flawlessly, but you have to use the "cover" function since that prioritizes the last input. hm socd function = rappysnappy hm cover function = razer snaptap / wooting socd
@TUB3R4FUN10 күн бұрын
Can I use cases with the gh60 standard?Sorry for the question, but have you tried socd or snap tap? Because this keyboard has better performance, did you notice any difference between the hm for the wooting or razer?
@Kokos_Gadgets9 күн бұрын
@@TUB3R4FUN Not every gh60 cases compatible with, cause of the usb cutout not always the same on these cases. But on the tofu redux, the cutout can be slide for the perfect adjustment. Getting a different case can be risky. Ive never had a razer or wooting keyboard, cant speak about them, but the hm66 "cover" function, which is the snaptap works really good as I said.
@Kokos_Gadgets9 күн бұрын
@@TUB3R4FUN Have tested the "cover" function in my second video of hm66, its not recorded as much professional but I think you can get the point: kzfaq.info/get/bejne/nMiSaqt4tLysl3k.html