Silberschnitt Running Pliers

Silberschnitt Running Pliers - Mosaic Review

Рет қаралды 9,631

3 жыл бұрын

Breaking complex stained glass shapes for mosaics can be quite difficult at the best of times, however Silberschnitt running pliers make breaking those shapes easier. For links on products and videos please click the button below "Show More"
=====================================
📌 📌📌 As an Amazon Associate I earn from qualifying purchases. (At no extra cost to you)
This helps to keep the channel going. Thankyou. :)
My Amazon Store where I list products that I use or similar products that I use
www.amazon.com/shop/treasuryroad
=====================================
📲📲📲 For business enquiries on reviewing products or for sponsorship please send an email, the email address is in the about page of this channel.
=====================================
Connect with me by subscribing to the following
www.treasuryroad.com.au
/ treasuryroad
treasuryroa...
www.pinterest.com.au/abeb96f2...
=====================================
Disclaimer
Videos produced by Treasury Road and all material provided within this website is for informational, educational, & entertainment purposes only. The video and all included information does in no way constitute the provision of professional advice.
Some of these projects, materials, and techniques may not be appropriate for all ages. Treasury Road does not guarantee or make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Users should seek appropriate independent professional advice prior to relying on, or entering into any commitment based on material published here, which material is purely published for reference purposes alone.
You agree that use of this information is at your own risk and Treasury Road cannot be held liable for any losses, liabilities, injuries or damages resulting from any or all claims.

Пікірлер: 28

@ericmoore6688 3 жыл бұрын

Thank you Peter. As you stated, these made the popular heart shape so easy to cut & other shapes too. The whole exercise seemed so effortless with these pliers. If l hadn't watched your demo l would never have known about this product.

@TreasuryRoad 3 жыл бұрын

Thankyou so much Eric, I was using clear glass which made the process easier, I only had them for a short period of time, when using stained glass there is a bit of a learning curve.

@Practice_Kindness-1st 10 ай бұрын

That intro music is cracking me up! I've been very curious about these, but have yet to commit to $$ - Great demo! New subbie here!

@TreasuryRoad 10 ай бұрын

Thankyou so much. They are really good if you want to create more complex breaks in the glass. But for straight cuts ordinary running pliers are a lot cheaper. Thanks for commenting and for subscribing. :)

@theresathomsen360 3 жыл бұрын

Thank you so much for sharing this and all your videos! Very informative.. I just got mine a couple of months ago and wasn't quite sure which way to turn the head! Thanks again

@TreasuryRoad 3 жыл бұрын

Thankyou very much, appreciate that and enjoy them. :)

@rupashukla5916 3 жыл бұрын

WOW - THE CRACKS ARE SO CLEAR!!! It was a pleasure watching the demo - you make it look soooo easy but I m sure it isn't

@TreasuryRoad 3 жыл бұрын

Thankyou very much Rupa, to be honest the clear is easier to do than stained glass. 😊

@meldanskin4475 3 ай бұрын

Wowza!!

@mindygeist7157 2 жыл бұрын

Thanks so much!

@TreasuryRoad 2 жыл бұрын

My pleasure Mindy and thanks for watching. :)

@iGigaCow 3 жыл бұрын

Awesome video! I recently got into stained glass and just finished my third (and most complex) project. I kept running into the issue where the glass would break in a completely different way than my score line. This would happen primarily on curves and narrow areas. Is this a case of my score like being faulty? Or my running pliers being too large for a small area? I’m trying to find another pair (like these) that might be more suitable for small pieces.

@petertwining5729 3 жыл бұрын

Thankyou very much Mike. When it comes to scoring stained glass there are so many variables to it, the type of glass, the temperature, the score etc and then theres just bad luck. Sometimes you have to coach the break of the glass to where you want it to go. If you have a look at my other video on Scoring and Breaking stained glass it will give you more info on my process but that doesn't mean its the only way there are many different ways to achieve the same outcome. kzfaq.info/get/bejne/otp6Y8p8t7bIhaM.html :)

@poodoo2815 3 жыл бұрын

Do they require more hand strength or did you find them easy to cut? I know the Breda nippers are not the same type but looking for running pliers similar in hand strength due to bilateral hand surgeries. Thanks for all your videos. So helpful. Rhonda

@TreasuryRoad 3 жыл бұрын

Thankyou very much Rhonda. I was using them on clear glass which is quite easy they may be different with stained glass as some stained glass can be difficult to work with, I only had them for a short time but I didn't find them heavy or require much pressure, if you are looking for a good light pair of running pliers then I would look at the blue Leponitt plastic ones. I have those and really love them for straight breaking the Silberscnitt I would consider more for breaking out shapes and they are the higher end of the price bracket. If you are wanting to do shapes you might want to consider a Taurus ring saw, very expensive a little noisy but certainly worth looking into if pressure on your hands is an issue. :)

@merlinmosaica5953 3 жыл бұрын

Rhonda, They don't require much hand strength at all. They are also made of aluminium, so are very light. The Blue lightweight ones are fine for straight cuts, but the Silberschnitt really come into their own for more complex curves. I will be selling some cutting systems designed for those with hand issues shortly, so it might be wise to keep an eye out for them on my website. Please feel free to drop me an email at alison@merlinmosaica.com.au

@DenGio55 Ай бұрын

Hi Peter! I’m contemplating purchasing these. Thanks for the great info! I’m trying to find the right running pliers that will allow me to break small strips of glass. Want to make strips for flower stems. I’m scoring the glass at a little wider than 1/8” but my dragon running pliers with rubber tips aren’t breaking very well. Would these work? Or maybe just the plastic Leponitts? Thanks so much!

@TreasuryRoad Ай бұрын

Thankyou so much, if I am right 1/8" is just over 3mm which is very narrow even for the plastic Leponitt running pliers which I love. What comes into play is the length that you are trying to break and also the glass itself because some breaks easier than others. I cannot definitively answer that question because there are variables however you would have better luck with the Silberschnitt or the Leponitt Springed Running pliers which are smaller and narrower than most other running pliers. You may not get all good breaks but I would think the majority would be good. Both of these can be purchased from www.merlinmosaica.com Thanks for watching and for your comment. :)

@DenGio55 Ай бұрын

@@TreasuryRoad thank you so much! As usual you go above and beyond to help!! Much appreciated! 🤗

@user-hc2mb9xe3g Жыл бұрын

Im looking to make very small squares of glass for glass on glass mosaic. Do you have any suggestions for cutting tic tac sized squares? I would appreciate your advice

@TreasuryRoad Жыл бұрын

When it comes to being that small I would think it would be extremely difficult to score and break them with any manual operation. However something like a Beetle Bits system may be your friend in this instance, something for you to look into that may work. Thanks for commenting. :)

@user-hc2mb9xe3g Жыл бұрын

@@TreasuryRoad **Thank you! I will research the tool I do appreciate your response. Update for now ...I found authentic and assorted tic tac sized stained glass.. triangle square and circle all in one pound increment!! ❤️💜❤️💜 Sincerely a dedicated subscriber

@user-hc2mb9xe3g Жыл бұрын

Would it be more efficient if i score both sides before breaking. My theory is that it gives a cleaner straighter break

@TreasuryRoad Жыл бұрын

I don't know anyone that does or needs to do that. Certainly I haven't found it at all necessary and I have scored many different brands and types of glass over the years. I'm not saying you cant do it but would it really be necessary? Thanks for commenting. :)

@user-hc2mb9xe3g Жыл бұрын

@@TreasuryRoad if the break searches for the crack?. Would it not find the opposite etch a cleaner straighter breaking point? I know it's a little much I don't see many doing it. I just think it would make for clean deep sharp corners lol.. I'll try it and tell you what I think 🧠

@gwyningham3071 2 жыл бұрын

Hi Peter, I have just received my Silberschnitt pliers. I am finding it difficult to see the score line on coloured glass to know where to put the point. Do you have any tips? Many thanks

@TreasuryRoad 2 жыл бұрын

Hi Gwyn, you may not be putting enough pressure on the glass scorer to create the score line because you should see some type of score line. If you are scoring correctly I would suggest putting a black texta mark along the line you want to score and then score along that. Having the glass at room temperature also helps with scoring, breaking and nipping. Hopefully these tips will make it easier. :)

@gwyningham3071 2 жыл бұрын

@@TreasuryRoad Thanks Peter. I can see the score line but when I put the pliers on it obscures my vision of the line. I can try the texta as you suggest though. I appreciate your help