Silhouette CAMEO 5 Unboxing! What's In the Box (And What Isn't)?

Рет қаралды 14,199

Silhouette School with Melissa Viscount

Күн бұрын

Silhouette CAMEO 5 Unboxing | Silhouette School Blog 😍 Limited CAMEO 5's available, sign up for notifications when the best CAMEO 5 bundles launch!! shrsl.com/4970m
👇 MORE INFO & IMPT LINKS!👇
👏 Silhouette CAMEO 5 set up start to finish: www.silhouetteschoolblog.com/...
Silhouette CAMEO 5 and CAMEO 5 Plus Everything to Know: Full Spec Sheet: www.silhouetteschoolblog.com/...
💰SHOP:
🤯 Steeply discounted CAMEO 4 Bundles: shrsl.com/4970q
🔥 Best Heat Press for CAMEO 5: shrsl.com/49712
👏 CAMEO 5 Autoblade Alternative (1mm Blade): shrsl.com/49717
💗 CAMEO 5 Tools: shrsl.com/49714
🌈Vinyl for CAMEO 5: shrsl.com/4971a
⚠️ Sign Up for CAMEO 5 Bundle Pre-order Alerts: www.subscribepage.com/silhoue...
🔥 Power Tools: shrsl.com/4841l
CAMEO 5 Right Tool 2 Sketch Pen Holder: shrsl.com/48oww
CAMEO 5 Heat Pen: shrsl.com/48ow1
Want to know about the new Silhouette CAMEO 5 and 15" CAMEO 5 Plus? ALL The info in one spot :) www.silhouetteschoolblog.com/...
Best Silhouette CAMEO Machines and Bundles:➡️ shrsl.com/3p4fm
Best Silhouette Studio Software Upgrades: ➡️ shrsl.com/3p4fo
⭐️Check out the Silhouette School Blog: www.silhouetteschoolblog.com
🤩Get 1:1 Silhouette Help and Exclusive Video Content and Member benefits with Silhouette U: silhouetteu.com/pages/silhoue... Get 50% off your 1st month with code KZfaq
💡Need a Silhouette tutor at your finger tips or a Silhouette how to guide? I’ve got that too! www.ultimateSilhouetteGuide.com
📧Sign up to get our email newsletter: www.silhouetteschoolblog.com/...
🎥Check out my most popular KZfaq Playlists: / silhouetteschool
✅LEARN:
New to Silhouette: www.silhouetteschoolblog.com/...
💡 Silhouette Studio Software Tutorials: www.silhouetteschoolblog.com/...
💡 Print and Cut tutorials www.silhouetteschoolblog.com/...
💡 Silhouette for Business (Cutting a Profit): www.silhouetteschoolblog.com/...
Be sure to 🎥 Subscribe to the Silhouette School KZfaq so you don’t miss an update: / @silhouetteschool
#silhouettecameo5 #silhouettecameo5 #2023silhouettemachines #silhouettecameo5plus #newsilhouette2023 #newsilhouetteproducts2023 #newsilhouettemachine2023 #silhouettecurio2 #silhouetteportrait4 #silhouetteschool #silhouetteschoolblog #silhouetterocks #silhouettestudio #silhouette_creative #silhouettecameoprojects #silhouettecameosvgs #silhouettecameodesigns #silhouetteprojects #silhouettecameolove #silhouettecameocrafts #silhouetteschoolblog #silhouetteschoolebook #silhouetteschool #silhouetteschool
00:00 Silhouette CAMEO 5 Unboxing Intro
00:20 CAMEO 5 Release Date Updates
00:52 New Silhouette Machines 2023
01:23 What's Included in the CAMEO 5 Box
01:43 Is CAMEO 5 USB Compatible?
02:14 Silhouette CAMEO 5 Blade
02:34 Silhouette CAMEO 5 Roll Feeder
03:33 CAMEO 5 Cutting Mat
03:46 First Look Silhouette CAMEO 5
04:01 CAMEO 5 Noise! Is it Quieter? Yes!
05:05 Unpacking & Unboxing Silhouette CAMEO 5
06:11 CAMEO 5 Power Tool Carriage for Power Tools
07:45 Silhouette CAMEO 5 Manual
07:56 Silhouette CAMEO 5 Tutorials and Help

Пікірлер: 29

@SilhouetteSchool 9 ай бұрын

Silhouette CAMEO 5 Unboxing 😍 Limited CAMEO 5's available, sign up for notifications when the best CAMEO 5 bundles launch!! shrsl.com/4970m Silhouette CAMEO 5 and CAMEO 5 Plus Everything to Know: Full Spec Sheet: www.silhouetteschoolblog.com/2023/09/new-silhouette-cameo-5-and-more-new.html 💰SHOP: 🤯 Steeply discounted CAMEO 4 Bundles: shrsl.com/4970q 🔥 Best Heat Press for CAMEO 5: shrsl.com/49712 👏 CAMEO 5 Autoblade Alternative (1mm Blade): shrsl.com/49717 💗 CAMEO 5 Tools: shrsl.com/49714

@materesamartinezminiaturas3701 2 ай бұрын

Thank you! I was having exactly the same problem with the shipping thing to take from the back, glad I found your video to see how to get it out :)

@SilhouetteSchool 2 ай бұрын

You're welcome!!

@darlahpotechin1668 9 ай бұрын

Can’t wait till mine arrives black or not.

@larrymayberry2312 9 ай бұрын

Thanks for the info. As son as I come back from the Bahamas, I will order mine

@mrssonni871 8 ай бұрын

Is the cable 110-220 v or only 110. what does it say on the cable please. It looks so great

@Gstunna- 8 ай бұрын

When will this be available in Canada

@wiedmakers 9 ай бұрын

Hey Melissa! Thanks for the video. I have watched a couple others while waiting for yours to drop and have a couple of questions I’m hoping you can answer in your next video. 1) With the Cameo 5 & new way of cutting off the roll are we still able to unload from the back? (So the roll stays loaded.) 2) When using the roll holder there is a piece that looks like a cover that just sticks out of the front serving no purpose but to take up extra space and look ugly. Can you tell if it can be removed without hurting anything? The reason I ask is because I only use the cameo with the roll holder - it’s always out. My main cameo 4 always has a roll of white on it, my second always has silver, my pro is the one that I use for other colors off the roll and my Cricuts are the machines that I use for mat cutting. It would be really inconvenient for me to have to reload every single time and deal with that cover sticking out 24/7. Also worth mentioning I found out that Silhouette is making Handmade members wait 3 months post release to use the discount and I’m curious as to whether you’ve always had to purchase the machines. 🤔 I was thinking they’d send them to you for free, all things considered.

@SilhouetteSchool 9 ай бұрын

The roll must be loaded from the front. To connect the roll feeder there is a piece that needs to be removed. That same piece is also removed for the ES base. This machine and the Curio 2 I purchased. I have been sent some machine in the past, but I've also purchased probably half of them.

@wiedmakers 9 ай бұрын

@@SilhouetteSchool Maybe I’m explaining wrong and it would be better understood if I asked on Facebook where I can post photos

@4nikkimay 9 ай бұрын

Yay 🎉

@lettyramirez1234 3 ай бұрын

Which machine is better? Cameo 5 or (24")cameo 4 pro?

@SilhouetteSchool 3 ай бұрын

The 24" Pro will always be at the bottom of the list

@Just-Make 8 ай бұрын

Great video! Is the mat the electrostatic one or does one need to buy a seperate one to get that electrostatic functionality?

@SilhouetteSchool 8 ай бұрын

The ES mat is a separate attachment that is sold separately from the CAMEO 5.

@Just-Make 8 ай бұрын

@@SilhouetteSchool many thanks for clarifying that!

@dh2039 4 ай бұрын

Thank you for making this video. I'm an absolute idiot. I couldn't for the life of me figure out how to get that stupid piece out that was tapped in the back. Of course turning the machine around was apparently a lot harder than getting frustrated and using inappropriate language.

@samanthaamaddox8505 8 ай бұрын

I have a pretty important question/issue... I followed all things here weeks ago when you set up yours, I set up mine.. (cameo 5) and I have made cuts with no issues, and now for some reason, I went to cut on HTV glitter / but when it loaded my mat, it apparently didn't pull it in far enough and has literally cut triangles out on the mat, I realize these mats are fairly thinner than most of my others, but again, I had the cameo 2.. so I was/am/had been using other mats from other mfr's, but I'm using the one that came with this cameo 5. but I have had such a time with the loading.... I DO NOT KNOW WHY! I've never had issues, and I didn't prior to last night, at first I thought maybe it was showing me using the mat in the send panel, and its very different than the 2 send panel of course, but I really don't see a "mat" option and I wanted and did, use the Kraft blade 3 but it only gives me the options for Kraft blade 2, and I have just simple circles to cut out and I do not know what the heck.. but when I go to the send panel it adds a bunch of squiggles!!?? .. I HAVE NO IDEA! BUT MY BIGGEST PROBLEM is the mat not being pulled into the machine far enough ... I literally had to feed the mat up into the machine about to the same / part / point where actual blades are housed... I really have no idea why,,,, why would it feed fine and then not and then cutting into the mat. is there a way to recalibrate the machine?? I don't see how it would be off when it arrived fine.. and now its not... if you could help or should I try customer service?? THANKS SO MUCH.. I HOPE THIS IS SOME WEIRD ERROR .. I'VE TRIED TO GO THRU AND RECHECK.. BUT I was cutting the other day.. oh and that was on card stock .. not that that should matter, and then my REAL ISSUES was last night w/ the Glitter HTV but only that it wasn't loading the mat correctly... and now trying to cut craft foam.. but its not recognizing the blade 3... I did read another persons comment about showing you on FB.. but if I need to send pics I can ... I just need to know where on FB you are ... to be sure. thanks so very much for ANY help!!

@SilhouetteSchool 8 ай бұрын

Hi @samanthaamaddox8505, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html

@samanthaamaddox8505 8 ай бұрын

@@SilhouetteSchool OK! THANKS sooo MUCH!! I've been working on it and trying to see if I had everything like I'm supposed to... but I will definitely email you! thanks very much!!

@PolkaGeekmm 7 ай бұрын

@@samanthaamaddox8505did you get an answer? I'm considering getting the cameo 5, but not much pros and cons on internet yet

@annperz4132 4 ай бұрын

Will the premium blade fit in the Cameo 5?

@SilhouetteSchool 4 ай бұрын

Yes

@4nikkimay 9 ай бұрын

What’s the trick to connecting it to a Mac??

@SilhouetteSchool 9 ай бұрын

What do you mean? Just turn on the bluetooth on the machine and install the software and it will connect. I will have a full setup video or blog post as well.

@4nikkimay 9 ай бұрын

I had to update the software. It was confusing bc it didn’t show the cameo 5 on the website.

@SilhouetteSchool 9 ай бұрын

This should help you with the complete setup www.silhouetteschoolblog.com/2023/10/how-to-setup-silhouette-cameo-5-start_7.html

@unpanaenmoto 9 ай бұрын

Hello, does the ac adapter support 220v electricity?

@lisa10202002 7 ай бұрын

beware if you update your Mac to the new IOS its not compatible with the new silhouette software so you'll have problems opening old designs