Pro tip, lol. If you have to get up on a Henry's coated roof, they are extremely EXTREMELY Slippery When Wet! What I have used for years is to wear an old pair of socks, no shoes, just socks, and even when the socks get wet, you will still grip *very well
@CalledToWander6 ай бұрын
Great tip! And very true.
@maddogshwa4 ай бұрын
Good to know!
@jcel58702 ай бұрын
Thx
@jackeubanks6687Ай бұрын
I use yoga socks
@stevewinter31886 ай бұрын
Hi there, My son just purchased an RV and it was his first purchase for an RV. He is not experienced in RV's at all and didn't inspect the RV very well when he purchased it. He was kind of in a bind for somewhere to live because he made the decision to quit his job and move out of the apartment where he was living and go full time RV-ing and start his own business. So after buying the RV and with some discussion with me, we found out that the roof wasn't in as good of shape as he thought and it needs some TLC. So we been watching videos and reaching roof coatings. We like the idea of the Henry 887 roof coating and wanted to use the Eterna bond tape, but seen that the 887 doesn't adhere to it, so I called Henry Tech support and discussed it with them. Since the Eterna bond tape has a very slick surface, I asked if one was to sand or scuff up the eterna bond tape so the 887 would adhere to it...Tech support said that sanding the Eterna bond tape would work with the 887 adhering to the tape. Just thought that I would pass this on
@CalledToWander6 ай бұрын
Thanks! We put 2 coats on and have very little issue. But do what Henry says and it should work!
@stevewinter31886 ай бұрын
The tech people also recommended using 885 wet patch / seam sealer instead of using the Eterna Bond, so we pondered on that and went with the 885. Since I live in NW Ohio and he lives in North Carolina, he is doing this all by himself. He got a Ryobi 1800 PSI pressure washer, some buckets and scrub brushes and started cleaning all the bad areas and around all the roof penetrations. He said that he would have all the repairs done today but I haven't herd from him on the repairs yet. He was going to put 2 coats of the 885 on and try to use up the whole 1 gallon can so there would be nothing wasted. So as weather permits, next week he'll pressure wash the whole roof and let dry for the 887 application. He purchased a 5 gallon can of the 887 and will apply 2 coats of that. We figure that should do the trick and seal the roof up for the next 10 years or more. Just thought I'd pass on the info for anyone reading your comment page. @@CalledToWander
@jonesbeasley29535 ай бұрын
Did my first time with Henry’s topi cool 5 years ago. Recoated yesterday looks great.
@CalledToWander4 ай бұрын
It’s amazing stuff!
@alicegunn39708 ай бұрын
I don't even have an RV and I find your videos very informative.. and there sure is alot of maintenance on RV's.. Good to know.. I dig you two.. and the dogs too
@CalledToWander8 ай бұрын
Thanks so much!
@curtistanner3422Ай бұрын
Your video was exactly what I was looking for. Showed in detail how tropicool works on eternabond. Already purchased eternabond and tropicool but not installed yet. Will be using both and will do two coats on the eternabond with tropicool just for thickness and glad to know the spray is great for patching any problems. Thank You😊😊😊
@CalledToWander12 күн бұрын
The spray was not as great as I thought, but good in a bind. For twice the cost, we're going to buy a gallon this year (Year 4) and put a light coat over any areas of concern where we sprayed in the past but want a thicker, uniform coat moving forward.
@CalledToWander12 күн бұрын
The spray was not as great as I thought, but good in a bind. For twice the cost, we're going to buy a gallon this year (Year 4) and put a light coat over any areas of concern where we sprayed in the past but want a thicker, uniform coat moving forward.
@maddogshwa4 ай бұрын
I was convinced after your first video but this seals the deal. I'll be doing this on my roof for sure.
@CalledToWander3 ай бұрын
Still going strong, coming up on 3 years!
@prepparig1445 ай бұрын
Whoa, Two year review??? Awesome, I’m sold. I’m redoing a shuttle bus and I’m about a week away from coating my roof. This made up my mind on product. I’m really shocked how glossy it still is. Seems everything else picks up dirt. Thank you!!!!
@CalledToWander5 ай бұрын
Hope you enjoy it!
@whatinthehellisrickydoing71163 ай бұрын
Thanks for this informative and honest video. It is often difficult to sort through the arm chair experts and /or idiots who either copy/paste other reviews or do a half-arsed job with a product and then trash it.
@CalledToWander3 ай бұрын
We have no monetary relationship to Henry’s and we don’t know how to lie. So glad you found it helpful! It’s just who we are :)
@thomasheaney20874 ай бұрын
Pine Sol pine cleaner might do better than Dawn up there. Dawn is a grease and oil cutter Pine cleaners work better on sap and tree droppings.
@Ssbad243 ай бұрын
Waterbase cleaner. yep
@CalledToWander3 ай бұрын
Great tip!
@a.h.3456Ай бұрын
Fantastic video, thank you for sharing!
@CalledToWander12 күн бұрын
You're welcome!
@surferjoehangten5 ай бұрын
Here's my conclusions from watching dozens of videos.....Have fun! TO DO A EPDM RV ROOF: Recommend spray bottle down a 50/50 solution of Simple Green & Bleach, a section at a time, then wait a few minutes and pressure wash off using a 40° fan spray at least 8-12" (depending upon PSI) away from the EPDM roof then let dry 24 hours. The next day, reseal top edges of all the edge trim pieces with non-leveling DICOR sealant, reseal all cracks with DICOR Self-Leveling lap sealant and/or use EternaBond (only where it's really needed) then coat the entire roof with HENRY's Tropicool 100% Silicone white roof coating. It can really be that simple.....JUST 2-3 DAYS OF WORK!
@CalledToWander4 ай бұрын
Thanks
@Viggyjr8 ай бұрын
I was concerned that the Tropicool wouldn't adhere to the eternabond tape, so I called their customer service. They suggested I paint the tape with an acrylic primer. I followed their recommendations. Unfortunately, the silicone still peeled off the tape. I taped the perimeter of the roof and turned down the edges to the gutter. Now that the coating has peeled, it looks really bad from the ground. Decor makes a primer for their silicone coating. I have purchased it and will try priming the eternabond tape before re- appling the Tropicool.
@CalledToWander8 ай бұрын
Glad you contacted them directly! We’ve not had any major issues with the eternabond but we also put 3 coats on so maybe that helped? Let us know how your next method goes so we can share with others!
@maddogshwa4 ай бұрын
I was wondering about some kind of primer. Thank you!
@Viggyjr4 ай бұрын
I haven't used the decor primer yet. I plan to apply the primer this summer.
@mark98070Ай бұрын
I was going to do my roof the same way...Turn down the edge so it folds into the gutter. IMO this is a critical step as the TPO can become compromised along the edges. Everyone seems to be overly concerned about the Tropi-cool not sticking to the Eternabond but imo just butt the 2 products up to each other and don't try to cover one with the other
@michellebarlondsmith62435 ай бұрын
Used Henry's...love it 2 almost 3 years in .... did not know they had a spray can ....
@CalledToWander5 ай бұрын
To be honest the spray can is not the most amazing thing. But it’s good to have in a bind if you happen to hit a branch or something that scrapes away the Henry’s. A gallon is so expensive but would do a better job if more patchwork was required
@mark98070Ай бұрын
Great video! you did a great job on the roof. Imo it doesn't matter that the Tropi-cool doesn't adhere to the Eternabond. As long as one product butts up to the other. Both are superior products! I am currently in the process of doing my RV roof and I'm looking to see how other people are doing theirs. Did a thorough cleaning today using tsp with a little bleach. Will do the perimeter with the Eternabond as well as around the vents etc. Then Saturday will roll on the Tropi-cool. My trailer is 25' do you think 2 gallon containers will do it?
@CalledToWander12 күн бұрын
Thanks for the info! Yes, while they officially do not play well together, the reality is that they have served us well for 4 years! As for how much you need, it was more cost effective for us to buy the 5 gallon container than 3 gallons. Plus we're not the kind of people to want to skimp when it comes to our roof - or water damage in general. So we wanted to have more than enough to put multiple coats on the roof so we'd be where we are now... worry free.
@tedelder7035 ай бұрын
Looks great getting ready to do the same thing you did one question will the tape stick to the henrys if you need to fix a spot on the road?
@CalledToWander4 ай бұрын
We carry a spray can of Henry for stopping emergency leaks. Haven’t had to use it yet. But that’s the plan. In theory nothing sticks to Henry’s. But in reality, Eternabond sticks to everything so in a pinch it should likely stick for the short term until you can get either the spray or a gallon of Henry from Home Depot
@cj24678 ай бұрын
Thank you for your videos! Super helpful. I’m thinking of doing the same thing so it was nice to get an update. Would you use Eternabond again?
@CalledToWander8 ай бұрын
We’ve learned that Henry has its own roofing repair tape we’d look into that is compatible with the sealant. But Eternabond is truly impenetrable. So it would depend on what we learned about whether or not to use the Henry tape.
@ladycasa25563 ай бұрын
Great video! Do you have a rubber roof? I've been researching and kept hearing conflicting opinions about putting silicone on EPDM roofs but this looks great and easy enough to maintain!
@CalledToWander3 ай бұрын
Yes, EPDM. This works for both EPDM and TPO. Ours went on super easy. And still holding up just like I applied it yesterday, 3 years later
@rayneday-trippin25542 ай бұрын
Thanks so much! Made my mind up now 🙂did you prime before using tropicool?
@CalledToWander12 күн бұрын
No prime, but lots of prep. Clean, clean, clean. We pressure washed, hand scrubbed and then went back with broom and blower immediately before applying to a dry roof. Prep is key.
@jimbluebaugh60907 ай бұрын
Looks great.
@CalledToWander6 ай бұрын
Thanks!
@RR-nv1qp8 ай бұрын
Thanks for the update. Just got 2 questions. would you attribute the reason for peeling off the eternabond tape is due to the material of the eternabond , hand touch residue , or need an extra step to prep? Also Is the tropicool in a gallon/5 gallon thicker than the spray can?
@CalledToWander8 ай бұрын
It’s due to the Henry’s not being compatible with the eternabond tape.. We didn’t know this until afterwards. Henry’s makes a roofing tape that can be used instead of the eternabond. Or just use the eternabond and plan to touch it up once a year or don’t use any tape and just use the Henry’s
@RR-nv1qp8 ай бұрын
Great info, thanks. I am doing the henry's and the idea ran thru my mind that may not be compatible but didn't pay attention to it and did put eternabond all around the edge lol.. then I watched your video and I'm kicking my self LMAO.. all about timing.. but hey either way I'm protected. Thanks again for the update and info. @@CalledToWander
@RR-nv1qp8 ай бұрын
Thanks again for your video. 0 regrets even with the eternabond tape issue. I did a really thick coat and even removed my ac and also applied over the vents and skylights.. not 100% pretty, but 100% more worry free. My recommendation is to save the money for the eternabond tape and apply just the Henry's. You can apply as thick or thin as you want.
@kurtmcclelland1086Ай бұрын
I just spoke to Henry’s rep. The reason it’s peeling off the eternabond tape is because eternabond formulated their tape so nothing would stick to it!
@CalledToWander12 күн бұрын
This may be true, but we have had minimal issues in 4 years of application. For what we were looking to do (more permanently seal our vents and other areas prone to leaking) without spending thousands on a new EPDM roof, this has done more than what we expected and saved us lots of money, time and worry. Plus, we just went through a crazy hail storm a month ago and there's no rips or tears in the coating like there would be in an EPDM or TPO roof.
@CalledToWander12 күн бұрын
This may be true, but we have had minimal issues in 4 years of application. For what we were looking to do (more permanently seal our vents and other areas prone to leaking) without spending thousands on a new EPDM roof, this has done more than what we expected and saved us lots of money, time and worry. Plus, we just went through a crazy hail storm a month ago and there's no rips or tears in the coating like there would be in an EPDM or TPO roof.
@lamariusdsp4204 ай бұрын
I'm torn. I want to go with Henry's silicone. Use it on roof of my house. It's fantastic. I peeled the cracked and leaking Dicor seals. Should I reapply the Dicor then move to silicone? Or should I use the silicone roof patch in place of the Dicor? If I use the Dicor first I'll probably wait a month before converting to silicone.
@CalledToWander3 ай бұрын
We fixed or installed new appliances (fans, ac cover, etc) and resealed used dicor the way you would with any roof. Then we slapped Eternabond over these seals to lock in the waterproof. Then we rolled over the whole roof, including the Eternabond, with Henry’s. Triple protection. It will be difficult if/when we have to remove any fans. But that’s why we did that work first. Hopefully years away from needing to do any work on the roof again
@paulremus23413 ай бұрын
Henry's doesn't stick to the top of the tape. But it does adhere to the side of the tape.
@CalledToWander3 ай бұрын
After 3 coats it’s sticking pretty well. However it sticks we’ll take it!
@johnr55453 ай бұрын
Great job god bless
@CalledToWander2 ай бұрын
Thank you! You too!
@adventuretateАй бұрын
Has anyone considered applying the Henry's coating first and then following up with Eternabond tape on the outside of the Henrys? Will Eternabond stick to the Henrys after its dry?
@CalledToWanderАй бұрын
@@adventuretate it most likely won’t stick to it
@craigcardwell4143Ай бұрын
Can you apply the Henry's up to the Eternabond but not over it?
@CalledToWander12 күн бұрын
You can. One viewer said its the adhesion between the Henry's and the side of the tape that makes the most strategic bond. But again, we put multiple coats over our entire roof and only in rare occurrences (where we encountered a tree branch that could not be avoided) did any of the Henry's actually scrape off of the Eternabond. If left alone, it will get along great together.
@emilywilcox39685 ай бұрын
Was this just one coat of the paint?
@CalledToWander5 ай бұрын
We applied 2 coats
@a.h.3456Ай бұрын
Did you paint your ac cover?
@CalledToWanderАй бұрын
@@a.h.3456 yes
@KoolBell4AU5 ай бұрын
What would you think about applying the Tropi-cool first and then putting on the EternaBond tape?
@CalledToWander5 ай бұрын
The eternabond tape won’t stick to the tropicool
@KoolBell4AU5 ай бұрын
Thanks.@@CalledToWander
@cherokeenation192 ай бұрын
What are your thoughts on putting the eternabond OVER the tropicool? I have my tropicool arriving this week and was thinking about doing the whole roof and then covering the edges of my roof with eternabond over the tropicool.
@CalledToWander2 ай бұрын
The eternabond won’t stick to the tropicool.
@cherokeenation192 ай бұрын
@CalledToWander thank you. Looking last night I found other responses saying the same. Got coat #1 on today and I love the tropicool. Plan on doing 1-2 more coats.
@douggee3610Ай бұрын
How can you use the tape on a silicone roof? Mine won’t stick to my roof.
@CalledToWanderАй бұрын
The tape is on the epdm roof and we painted the Henry’s tropicool over it..
@greggwoods71734 ай бұрын
Is there a primer you could spray over the tape that will help the Silicone stick to it?
@CalledToWander4 ай бұрын
Not that we are aware. Other people have said they scuffed up the tape with wire brush. But ours has adhered for the most part with those few areas of exception. We laid on a thick 2.5 time coat the first time around
@maura63758 ай бұрын
👍👍👍😁
@CalledToWander8 ай бұрын
Thanks!
@guttermastersplus561310 күн бұрын
Drake video playing simple and intelligent
@thehalloweenaddiction18433 ай бұрын
What did you clean your roof with before you applied the coating?
@CalledToWander3 ай бұрын
Dawn detergent and a light pressure washing.
@heathcwalker2 ай бұрын
Is it better than FlexSeal ?
@CalledToWander2 ай бұрын
100 times better
@xxlxpman25 күн бұрын
Dirt is better than flexseal. Horrendous stuff.
@MikePelfrey-sd5lb5 ай бұрын
May I ask, What do you put around your vents and AC to seal? Do you seal with something before applying the Henry’s?
@CalledToWander5 ай бұрын
We put Eternabond around the vents, etc then painted the Henry’s. 2 coats later and its still going strong