Thanks for doing this review guys!! 🔥

Another great videos guys. Love the ones you do together, nice to have both opinions on these!

Had them a few weeks and have had to construct my own rubber heel rest for my Trak Racer pedal plate. Have also rotated both pedal faces 180 degrees to reduce gap at the top. Following that bit of own hardware setup, have genuinely made me a faster and more consistent sim racer. Love them.

I'm genuinely enchanted by your video! - "Challenges become stepping stones on the path to growth..."

Thanks for the review guys. Mine have arrived and I am waiting to order the adjustable pedal plate and receive that before mounting on the rig. For me, it's an upgrade from my Thrustmaster T-CLM's.

Great review! How they are compared to other pedals like the vrs, vnm?

For those that are interested, I've been a bit disappointed with these pedals. Here are some of my thoughts... - The worst thing is, there is a fair bit of jitter in the hall effect sensors for the accelerator and clutch (the brake is nice and smooth, though). My previous pedals (Fanatec CSLs) were half this price and have better sensors. I'll be contacting SimLab about this. Guess we'll see how good their support is. - The clutch came without the bolts at the pivot point tightened down, so the pedal jiggled. It was hard to tighten this down myself because both sides are connected together, so you need two hex wrenches that are the same size and I only have one set. I had to borrow one from a neighbor. - The clutch also came without the bolts on the pedal face angle bracket tightened down. Luckily, this was an easy fix. - The clutch manual states "This is the only pedal which we limit to only using the top adjustment point on the pedal arm. Because of the swiveling pivot part, we do not support any of the other adjustment holes." This limits the adjustability of the pedal and the setting of the bite point. - All the pedals squeaked when I first got them. I had to lubricate them straight out of the box. - The pedals at their fully extended points are all different angles. This is not the faces, but the armatures. The worst part is that this made the brake lower than the accelerator, so it was hard to heel/toe. It took a bit of fiddling and I had to move the brake forward a fair bit to get it to work. - Although this might be just personal preference, the accelerator pedal is short, which also makes it difficult to heal/toe. I was able to solve this by designing and printing a replacement pedal. If you don't have a 3D printer, you'll just have to get used to it, I guess. - There are no color-codings or markings indicating which spring or elastomer is which. This is minor, but so simple. - The adjustment screws that are at your heal are really annoying - The pedal faces are too high, although this can be solved if you don't mind mounting them upside-down. That makes the SimLab lettering upside-down, but that doesn't really bother me. - Once I fiddled around enough to get them pretty well set, they do feel pretty good, though. I know these aren't the most expensive pedals out there, but they are not basic, and for the price, I expected a bit better quality control and attention to detail. Obviously, these are just my opinions. Your impression of them may be different. I'm not saying not to buy them. These are just some things to be aware of.

any plan to check out the cammus lc100?

Do you think they are better than the T-LCM pedals by Thrustmaster ?

I've had 2 major failures with the Throttle pedal, both times the bracket holding the Magnetic sensor has sheared off the base of the pedal. Once may have been a flaw, but 2. The pedals are not fit for purpose.

Heusinkveld or this? Come from fanatec v3. But there is a lot of options, I can’t choose

Had these for a few weeks - the only problem I have is that there is zero indication on the strength of the springs for either brake or throttle - you are left pushing them yourself to see how hard they are. There is nothing in the instructions regarding this. At least the elastomers have a number stamped on them.

Does anyone know how to fix the software, the update page just shows up blank and I can’t find my pedals on the software, help me 😢

I've had my XP1's for a couple of weeks now. I do not like the elastometers. I ended up using an $8 metal red spring from Amazon that I was already using on my CSL load cell pedals. After tweaking a lot, they are really nice pedals with lots of adjustability.

Does it work on consoles?

U 2 make a great couple congrats on the wedding. Hopefully u 2 boys will love each other forever and ever.

that pressure point is a deal breaker for me :( 11:50 the blue thumb screw major oversight do simlabs not test their own equipment before manufacture?

I just installed these on my rig today. Im getting some kind of interference in the software calibration. My clutch and throttle light up green as if Im pressing on the with a twitchy foot and I dont have any pressure on the pedals. I tried changing out the wires with other brands I have and I cant get it to stop. When I try to bind settings in games it wont allow me because the pedals are active. I tried dead zones, unplugging, replugging, restarting, recalibrating. Its really frustrating because these pedals feel so freaking good. Im online trying to find information on what I can do but no luck yet

Are these "real" loadcell pedals or are they similar to the Asetek? They look kind of similar from the outside, but I've got absolutely no idea about these technical things, so if someone could enlighten me, that'd be amazing. I'm considering them in the price gap between the Fanatec Elite V2 and the likes of the VRM, Heusinkveld etc

Look...buying pedals today is an effort. These are interesting BUT they use elastometers and the elastometer relaxation (even new) is a thing. So I'm not sure if these or VRS or Simgrade VX-Pro that instead use springs...These look really neat though.

Can somone please share simlab XP1 Rfactor2 settings? ?

Oww I’llo is

It's really cool they r only $89.00. I just ordered mine

It should be illegal to release pedals with no ffb in the brake pedal from now on since the simucubes have come out.

I’ll never understand how they made something all metal look so much like cheap plastic. Idk if I’m the only one but these look toyish to me.