Update: Some are having issues compiling lately. You need to use version 2.3.1 of the seeed can library. I have updated the link in the description to the releases page. Under 2.3.1 select assets, download zip.

Thank you so much im new to the electronic world i recently purchased a flooded ferrari im pretty sure im going to have to pull the out the dash cluster to look for any damage and try to power up. I truly like your stated description thanks for turning me to the right direction

Thank you sir this was a much needed piece to a project I didn’t even know I had

Thank you for the inspiration and instructions! I got my P2 DIM and successfully made it work with Simhub and ETS2. It would be great if VolvoDIM library could be upgraded with indicator light functionality (blinkers, headlights, foglights, high beams etc).

Thank you so much! ive been looking for a tutorial for a loooong time|!!

Awesome, really underrated video! I love how well you explained everything, just what I needed. I was wondering, if I wanted to do this with a P3 cluster, how far would following this tutorial get me? I have some experience with Arduinos and I know my dad could help me further with the coding part. The connector behind the cluster looks identical, which really surprised me. Atleast they both have seven pins on the lower row, and three on the upper and in the same layout. Also the plastic part looks the same. The clusters are the part that process the data, aren't they? I mean, the cluster being the part that decides what to show up on the screens, not the CEM or other car computers. Like if your car would send out a signal about low oil pressure, the cluster would always get the same signal, and it would be the cluster that decides to say "Low oil pressure" in the language it is using. It would be cool to make the dash inform you about new emails, tolls etc. in ETS2, but I suppose its not possible. I know it's possible to code new messages into P2 clusters so atleast you can always use a P2 car to make new messages, and then make SimHub use those messages. One Finnish guy made his car display in Finnish "Driver requires a bottle" :D. Not at all sure if you can do anything similar with a P3 dash. Any info would be highly appreciated. Like DMD AUTO said, "this was a much needed piece to a project I didn’t even know I had". My simulator setup will be a project in the far future and also really ambitious, especially for me.

I play a ton of BeamNG and I used to have a V70R so this is perfect

here we go again... managed to get an e60 and an e46 cluster somewhat working...waaaay too complicated tho. Just spent like 70 bucks to get all the volvo cluster stuff, lets hope it works this time

Legendary bro

wouldnt it work with Volvo P2 platform as long they use p2?

@AVGarage Here's the link to a video of the issue I'm having :kzfaq.info/get/bejne/oq-KjKSarLGpYXU.html (might still be processing)

Any idea if I could do this for my p80 cluster? Very well explained video!

Please I have a different dashboard how do I know the places of the pins I searched a lot and did not find any way to get me to my demand ?

hi congratulations on your work, question: does it also work on the normal v70 or s60 panel or just this type? I thank you in advance😊

very nice i orderd s80 cluster:)

Hi I saw that you have a new library for the Mileage support how do I install it thanks in advance

Hey when I try to upload Sketch setup it says "Compilation failed". Please help me & thanks

Has anyone tried this with a p3 cluster? I have a 2016 xc60 panel laying around that I'd love to try this with!

I've gotten my hands on a 2005 petrol but European cluster, is there a chance it won't work at all because I have wired all of it up and programmed the UNO without any result of lights on the dash. I may also have to redo wiring, it's a bit messy😅

Can the S80 P3 cluster be operated in the same way?

I got a ford fiesta freedom 05 06 how do i wire mine into

Good job

epic video

Hi i was having a look at the Code on the Arduino how do you set up the geae indicator my diesel cluster came out of a Manual what do i do to the code for the gear indicator to work and i still haven't figured out how to set the time Thanks in advance

What happens if you have a different cluster? do you need to find out how to get the files yourself and make them or something?

Hey! does the lights work on the cluster when you turn it on in game? Thanks you!

hi my arduino is getting an message that upload failed. What could it be?

hi I have now programmed my arduino but it does not want to get any power to the speedometer what could be wrong have now followed every single step?

can i use the cluster whitout the relay?

Hey mate how would i go about editing your code to work with a different cluster, i have a ford falcon BA cluster that im playing around with as i want to make a full dash set up for my sim rig, if i can find the can bus codes for this cluster can i edit your code to work? With it? Ps im new to all this arduino programming stuff but its a little project to help me learn. Your help would be much appreciated

so i have a tire pressure system service required and time for regular maintenance code how do i clear that?

What does the relay do? Some videos I've seen, they don't seem to use the 5v relay. Just the canbus shield on top of the arduino, with a 12v power supply going straight to the arduino. Very new to this.

I'm having issues 😕 2008 volvo xc90r cluster I have everything wired right and cluster not a single light turning on pls help

Great insider but I have just one question. Is it safe to use 5 volt relay to power any cluster that can be 12 volts? I wanna follow the same technique but with a BMW E53 cluster. Thanks!

Does the diesel cluster work with this code?

What would I have to do to use this with a 2003 v70 cluster? I’m assuming I’d have to change the code but what do I actually have to do?

Hello,can you help me with my ford edge 2016 cluster,i want do this cluster with simhub for assetto corsa,ets 2

Since this probably doesn’t work on a v70 cluster from 2001 do you have any idea what needs to be done for it to work?

can you use a VOLVO 60 SEDAN INSTRUMENT cluster

nice vid, quick question, is most if not all cluster gauge can be configure with simhub? ive got a few cluster gauge laying around.. and seeing your video wondering if they will work also as this?

Also can you use a 05 to 09 Volvo V70 cluster

Does it work with HW-184 module and can i use different clusters like one from audi or bmw (e60/e61)?

Im having issues with the gear selector simhub says it shows N but the cluster shows P i have done everything could you maybe help with it?

Thx bro for the tutorial I'm frm Instagram

Hi I just got my P2 Gauge cluster from the scrapyard I got mine from a 2007 Volvo V70 D5 5 Cylinder diesel I managed to configure the sketch for Diesel but how exactly do you set the Time as when I remove the // from Dim Time and then I save and upload and I get compilation error Ammi doing something wrong the outside temperature came up in Centigrade and the clock came up as a 24 hour Thanks in advance

Does it matter if the cluster comes from a Diesel or Petrol version ? does it matter if its a European with km/h speedometer or American with mph speedometer ?

Was support for indicators ever added? I noticed there are VolvoDIM::setLeftBlinker and VolvoDIM::setRightBlinker in the DIM code? Thanks

you know if this works with any clusters? like a newer Dodge Charger cluster or something?

does this work with p2 from 2002?

Do you have a program or know if there is one for a W211 Mercedes Benz E-Class Cluster? Good, easy t o understand Video btw

Would this work for an XC90 cluster?

Interesting to develop something similar for my Audi s4 cluster. What did you use to develop the code? I'd imagine you sniff the data from a running car? The relay was jus to reset the cluster?

I purchased one of these P2 connector gauges and connected it, however when I copy and paste the customized Arduino volvo.txt, an error occurs. It appears like @greenleaf1292 is having the same issue. I believe it has to do with the VolvoDIM. Its the same error code as @greenleaf1292 it says "In file included from C:\Program Files (x86)\SimHub\_Addons\Arduino\DisplayClientV2\DisplayClientV2.ino:938:0: sketch\SHCustomProtocol.h:5:22: fatal error: VolvoDIM.h: No such file or directory #include compilation terminated." So, I'm currently stuck on this. Even after reinstalling everything, the issue still occurs.

I can use the MCP2515 instead of the MPC 2551

is there any way to make the left right blinker and the glow plug light to work

We can use any car cluster?

one more question the panel of the XC90 2005 is compatible

hey its me again! im having the same problem as ​​⁠greenleaf and i cant get it to compile

would this work with a prefacelift p3 cluster?

Have a problem my sim isn’t lighting up

Hi . Can bus module will do too ?

Hi, do you have a link for the custom code for megane 3 please

Can you do the same with any cluster for example civic ek?

So do any of the indicator lights work? For example headlights and turn signals?

Nice work! What program do you use to log the canbus and is it through Obd?

so it works with any counter block

I have a s40 cluster and it’s just twitching the needles whenever I reset the uno, any idea why (pt #:30710072) PLEASE HELP!

do you have a good way to remove the tire pressure warning light and message

for what is the additional board ??? can the cables not plugged in to the uno directly ??

Dose this only work for Volvo clusters or can we do the same thing with a different brand cluster?

Thank you for this great video. I actually have a question, do you have by any chance got the custom code in European?

I have an acura integra cluster 99 could I do this with it? Im trying to make a a type r simulator I have the rhd dash, Everything just need the dash

Is there any way to get a cluster from a Saab 9-5 to work?

I am still having trouble, I am getting a basic error code of " 'FlowSerialReadStringUntil' was not declared in this scope " under the coolantTemp line. telling the studio to ignore this line ended up in the same result, just on the next line down. Simhub also refuses to recognize my Arduino properly, saying that it is "not configured" and leaving no trace on how to configure it. Anything else you can do to help would be appreciated. Thanks

Hello, I am having trouble on this. I have all the parts, my wiring is correct, but the software when i go to export the code to the Arduino, it starts and it gets to about a third of the way there and says "Compilation Error" and supplies no further explanation (in simhub) I do have a slightly different Arduino, I am using the third revision (R3) while (I believe) you are using revision one (R1). I am not too good with these Arduino's and am not familiar with the troubleshooting process. However I can attempt to give you some clues as to what is going on. In SimHub, The Arduino has two COM ports, while you only have one. The two COM ports are labeled as: "COM1: Communications port" and "COM6: Arduino UNO". I have tried the software on a different computer, but only getting the same result. I am afraid that it is a hardware incompatibility. Though I really hope I just set something up in the software wrong. Any guidance would be appreciated, thanks.

I am having trouble loading my arduino. I keep getting compilation error. You should sell the already programmed arduino boards

which pins are used 12v negative pins fuel speedometer rpm temperature

Hello, it's me again. I am not having issues this time and it has been working flawlessly ever since we resolved my issue. This is merely a question, and was wondering if you knew the answer. I dug through your research in the master ZIP folder you left in Github, and found a "Sweep Gauges" section, and was wondering how I implement that into the code to get it to sweep the gauges on startup. Funnily enough I 've wanted to do this for quite some time, but couldn't figure out how to write the code. Some guidance would be appreciated when you have the time!

Can I get the Trip miles to work in sim hub and Change the clock from 24 hour to 12 hour and the outside temperature from Celsius to Faranhight

Thank you! This is amazing, I was actually headed to a pick and pay to get a center console for my sim rig, I have an S60 but wanted the 850 panel. I don’t suppose you know if it’s possible with such an old dashboard?

hello again, finally got the right one, but now my problem is my km/h is going with some totally another speed then mine is, any way to fix is?

Welp, my V70 has a green connector

(This comment has been re-edited because i now have a VW Routan cluster and a CAN-Bus shield). Edit: Will this work for a 2013 T&C van cluster?

Hey! Do you know if i can use a Cluster from 2004? (Spare part number 8602882)