This video we have made for educational purpose. We may be wrong. One can make own decision for repairing. We are not responsible for any damage or risk. This method is only for LB350/500 and UCE 350...Thanks and stay connected.
Пікірлер: 1 100
@sanjutheplayer6 жыл бұрын
man really informative video i have seen on KZfaq ever sir your Chanel is going to see some serious progress 👌
@tejastalware11364 жыл бұрын
first time i saw a mechanic with superb English...well Done sir. Nice information...thanks
@rajuhanumanthu5 жыл бұрын
Very useful video Sir...my bike gvng 30kmpl after using this trick in my classic 350 2017 model... 3 full turns ...now its gvng 34kmpl... Tq vry much
@frankrock39655 жыл бұрын
Thank you for your untiring service to motorcycling community. I was able to get a colder carburettor and surprisingly could see droplets of water seeping through the exhaust after following your precise instructions. Couldn't believe it was possible on an air cooled engine like the RE.
@MechAutoClinic5 жыл бұрын
always welcome sir
@nik63783 жыл бұрын
Thank you so much brother. After following your video and by tunning the way you instructed, my classic started giving milage of 34Km/PL in city! Really impressive!! It was earlier 23-24. After changing to custom exhaust which ruined performance of my classic. So reverted back after month to stock. I highly recommend if you love your classic Don't use Custom Exhaust. Exact point I found for my classic 350 is at 4th Turn. Where RPM was also high stable and Smooth. Nither lean mixture nor rich I guess on 4 turn it was perfect for me. What i found about RE Service they open it upto 5 or 5.5 turns which consume lot of fuel which is unnecessary. Happy Riding.😇🙏
@MechAutoClinic3 жыл бұрын
thanks for feedback
@pritishmohapatra46476 жыл бұрын
Thank you very much brother
@MechAutoClinic6 жыл бұрын
Thank you very much and stay connected.
@ahmaq20026 жыл бұрын
One of the best KZfaq Channel . Aap ki style aur knowlede doni hi best hai.
@harshitsreenivasan28 күн бұрын
This is a life saver video. I have been watching you since you were featured in PowerDrift's Bullet Standard 500 video. I keep this as a reference for tuning carburetor. Cannot thank you enough. I gave my bike for service and as usual the Guys messed up my bike. So not happy. Anyways the spark plug s were due for change. Ditched the old spark plug, installed new ones, tuned it as per your video and voila, the bike was back to butter smooth. Thanks a ton.. I have recommended this video to my friends who always thought tuning carburetor is rocket science.
@MechAutoClinic4 күн бұрын
thanks
@keeganfernandes87894 жыл бұрын
I get the maximum rpm at 5 full turns, at 3 the carburetor gets cold & I struggle to start it,it takes more time to drop to idle after accelerating, can you please suggest me what to do ?
@sarabjotsingh43282 жыл бұрын
Same with me.
@kennethtusing59925 жыл бұрын
Sir..I owned Classic 350 Gunmetal Grey. Before servicing my bike used to give me mileage of 37-38 kms. After servicing the mileage dropped to 32-33 kms. After watching your video, I tuned my carburetor and now my bike is giving me 38 kms and tons of thanks for this. However, I seem to notice my bike is slightly sluggish than it used to be. Does richer/leaner mixture effect pick up? Could this be that I have not reached the optimum tuning..?
@rahulsanyal38937 ай бұрын
Yes bro , if you want power turn it 5 to 6 times minimum 😂 I don't care about mileage all I care is pickup I opened it to 7 turns and getting 24 kmpl but absolutely stunning performance
@abhinand.a30742 жыл бұрын
Today I done this setting I feel difference by smooth kick and cold carburettor, smooth riding Thanks brother ❤️👍
@06vipin5 жыл бұрын
Hello Chinmay, Hope you're doing well! I'm having a new Bajaj Pulsar 220 BS4 model 2017, with just previous first paid service i made complaint about the cylinder head leakage for oil, and the service centre guys make this issue resolved, but after this i found a very bad performance with the bike, startup trouble, engine turn off in traffic. When i checked the spark plugs, both are completely black on their electrodes! Later i went through with this vlog, and thanks to you with two weeks of monitoring and tuning i achieved the two major aspects of fine tuned carburettor which you've shared i.e. bottom of the carburettor should be cold and the smoke feels the humidity in exhaust. But i have a little trouble here which is, at optimum acceleration i'm getting good performance from this Machine, but whenever I pulls the throttle, instead of quickly responding, bike pushes down like it is not getting prompt fuel mixture to perform!(Exactly the same feel when your bike got into reserved fuel state while riding) Or might be there is something else I'm not getting? Could you please suggest me what could be the issue with this situation? The AFR screw is set to 2 and half anticlockwise setting. Thanks to you again.
@user-ns9cv6kb1e5 жыл бұрын
But here you didnt mentioned anything about the fuel setting. As tuning means making the right combination of air-fuel mixture, it is also important to know how to set that parameter too...
@sniper97863 жыл бұрын
There is only 1 screw in uce bullet carb. It works both for fuel and air.
@pritishmohapatra46476 жыл бұрын
Subscribed today your channel
@MechAutoClinic6 жыл бұрын
Thank you very much and stay connected.
@amitavaghosh97344 жыл бұрын
Dear Chinmay, Have been watching your videoes since long and have strong interest on them. With your guidance I have tuned my 2016, BS3 Classic 350, trust me it couldn't have been better, I have water droplets flowing from the exhaust every morning. My machine is a complete stock has no modifications and have gone through a strict running in period. My thanks to you for the initiative to help the amature like me to understand and take risk of DIY. My request to you for a video on possibility to run UCE without battery. Thank you again Dada!!
@MechAutoClinic4 жыл бұрын
i don't recommend AC integration in DC system. voltages vary a lot during no battery pack. unless the Electronics is supportive to control DC up to the mark. thanks for feedback. and thanks for appreciation videos. stay home stay safe.
@sarushrena5 жыл бұрын
great knowledge provided by you sir.. really haven't found such crisp way of adjustment anywhere. Thanks a lott sir
@MechAutoClinic5 жыл бұрын
thanks
@mynameishimanshu6 жыл бұрын
Sir i have follow your settings on my classic 350 and the mileage has also improved now it is giving me more than 40 kmpl but one thing sometimes not usual every day in the morning when i kick start my bike it give a ptka sound misfire sound why it is coming sir
@MechAutoClinic6 жыл бұрын
which silencer you are using?
@mynameishimanshu6 жыл бұрын
mechautoclinic Sir mai tu stock silencer use kr rha hu Kbhi kbhi first kick mai misfire ata ha fir pure din kick lgata hu jb bhi fir misfire ka sound repeat nhi hota ha
@MechAutoClinic6 жыл бұрын
probability is your bike is leaner side.
@mynameishimanshu6 жыл бұрын
mechautoclinic How to improve that sir i have turn my air mixture screw full 3 turns
@MechAutoClinic6 жыл бұрын
now you will have to fiddle around with it towards 4...if nothing works then you may have to check your jets and spark plug also. If spark plugs are wrong or gone then also you will have this issue.
@prasanthprabakarg6 жыл бұрын
Sir, you speak with lot of knowledge, it would be great if you can speak in English so that most of the people can get the benefit.
@MechAutoClinic6 жыл бұрын
please check the list...thanks,
@amitswain13 жыл бұрын
Chinmay Sir- very nice n lucid description. I'll visit you when I go Pune. Keep posting videos n spread knowledge. Regards.
@khyberali18746 жыл бұрын
Sorry for giving comment lately.. as i used this a month back, but was too busy in some work.. anyways Just want to tell you this video is amazing.. this thing no body have ever told in there video (3 full turns) as no body reads user manual :) . my earlier average was 29-30 max n now my enfild average is 40kmph. Thanks to u bro. This is my 2nd comment i am giving in your video. I really appreciate your work.. i just 3 full trun and it worked as my classic is brand new, maybe for other guys (old bike) they need to adjust more. I blindly did n it worked. Thankyou
@MechAutoClinic6 жыл бұрын
thanks for your feedback.
@tabassumshaikh39066 жыл бұрын
Bhai 1 no aap hindi me bola karo
@MechAutoClinic6 жыл бұрын
thanks for suggestion. will try to do so. thanks for watching and stay connected.
@sanjaysinghsanjaysinghsanj79164 жыл бұрын
हिन्दुस्तान में सारे अंग्रेज नही रहते हैं जो अंग्रेजी बोलते हो
@MechAutoClinic4 жыл бұрын
galti ho gaya malik free main video deke. thanks for watching and comment.
@vashusharma43017 ай бұрын
@@MechAutoClinic sr हिन्दी में
@RavindraKumar-ms1vt23 күн бұрын
😂😂😂😂😂😅
@eliyasdgl4 жыл бұрын
Man you are genius...Wonderful explaination
@vinayanand68796 жыл бұрын
Sir...jiiii ...thaaaaaank u very much bhot hi bdaaa waaala...mujey aisaa kyun lug rhaa h aapney ye video mere liye hi bnaayi....h.... It's tuning ok for my standard 350 feb 2017 bs3 model
@MechAutoClinic6 жыл бұрын
mostly common tuning for all the bikes.
@vinayanand68796 жыл бұрын
mechautoclinic ...haha...its common only for you
@vinayanand68796 жыл бұрын
sorry to inform you that i cann't judge where it is lowering down...main issue is that the dicompressor pin knock sound is coming tuk tuk tuk tuk.....because i had changed my bend pipe or silencer........ sir please help me out...............there is nobody to solve that
@timoz86486 жыл бұрын
I've been watching your video for sometime and find it very useful thanks for your informative display which is practicable even for me.ive been experiencing slight wobble/shake from front side when it crosses 40/45 km/ph,when riding in straight but normal when in curves or bend road.RE medhanic checked all possible factors like wheel bearing, centre bush,rear wheel bearing front fork stability and front disc no fault was detected even realign the front tyre from puncture repair shop.problem still persist,please aap suggestions dijiye
@MechAutoClinic6 жыл бұрын
just replace whole wheel assembly with another for testing and then let me know.
@rajendrajadhav10324 жыл бұрын
i saw the special tool video as well, thanks for sharing such informational videos.
@MechAutoClinic4 жыл бұрын
always welcome
@Chandani.10_44 жыл бұрын
बहुत अच्छा तरीका है बल्कि बहुत सरल भी है
@ravimishra23016 жыл бұрын
Subbed ! Such an informative video with good explanation. Wish you all the best.
@MechAutoClinic6 жыл бұрын
thank you very much. keep watching.
@BeingDengineer5 жыл бұрын
Worth watching this video. Thanks bro. You nailed it. Nice video and nicely explained.
@MechAutoClinic5 жыл бұрын
thank you.
@vaasu_changotra2 жыл бұрын
Good day sir! I have a Thunderbird Twinspark 2010 (UCE). I’ll soon be changing both the spark plugs for new out-of-the-showroom ones. Can I too follow the same settings?
@acsmichael5 жыл бұрын
Hello sir, thank you for the helpful video. Could you please tell us which is the handle used on that bike ? Where can I find one like that ? How much would it cost me.
@addythakur7455 жыл бұрын
Bhaut informative video banate ho aap. Channel ko continue karo Do Char log Hi To Hai KZfaq par Jo Sahi information Dete Hain Ab wo Bhi KZfaq Chod Denge to...
@MechAutoClinic5 жыл бұрын
thanks
@RohitZedek5 жыл бұрын
Really nice and informative video. Especially regarding carb types.
@MechAutoClinic5 жыл бұрын
thanks
@sandeepmalik5015 жыл бұрын
Sir i am going to buy Royal Enfield 350. please suggest me which one will be best. either standard 350 or Classic 350
@nawfalhasan19723 жыл бұрын
Sir I have Classic 350 gunmetal grey 2018 model(non abs) . Recently I have changed my exhaust to short bottle. Should I have to tune my carburetor.
@Batch934 жыл бұрын
Very Helpfull.speech also good..keep it up Bhai.
@gireesanppm42024 жыл бұрын
SUPER WORK AND SUPER VIDEO GOOD PERFORMANCE AUDIO CLARITY BEAUTYFULL THANKS DEAR
@MechAutoClinic4 жыл бұрын
thanks for appreciation
@subhadipmondal30076 жыл бұрын
Sir, you are very good to understand about this, thank you, sir, it is very nice to participate in your channel.
@MechAutoClinic6 жыл бұрын
Thanks for watching stay connected.
@daddyanddevu Жыл бұрын
Hii brother.. Which is the best carborator for 2002 electra ( without battery model ) for more fuel efficiency
@toolkits256 жыл бұрын
thank u so much...you help me...none of any help me like u sir...hats off sir...keep going...
@MechAutoClinic6 жыл бұрын
you are always welcome...happy to help u
@minguelitajayjay20216 жыл бұрын
Ani thanks for very clear info. If possible what is the best adjusment for kawasaki 175 cc baraku for better pick up ...
@MechAutoClinic6 жыл бұрын
1.5 AFR. since it has VM series carburetor.
@mnpritsandhu86065 жыл бұрын
Good information sir.. And you narate it very well 👍
@MechAutoClinic5 жыл бұрын
Thanks for appreciating...stay connected
@sivanagasai_ch5 жыл бұрын
It is applicable for the classic 350 bs4 model
@suriyanarayananb70783 жыл бұрын
I tuned my Yamaha ss125 by ur method, it goes rised up to 4full turns, from3full turns, (CV carb)opinion please.
@vinayprasad7384 жыл бұрын
Hello Sir, I have a bs26 carburator on my bike, performance is good but Mileage is not as expected. Can you change to VM28 for performance as well as mileage ??? Bike: Machismo AVL 350 4 Speed
@krishnacharyakashi9655 жыл бұрын
please tell us about squish banding in cast iron 350 bullet and benifits of squish banding.
@dheerajchamoli2604 жыл бұрын
dear sir .. left side square crome box mein kya hota hai,,,, which s connecting to carburetor or airfilter
@gourisankar30393 жыл бұрын
Sir iam impressed very valuable information give to me many many thanks. I small request to you iam also having honda shine 2013 model but the vehicle is in any gear small missing is wear that means moving gap. So please any solution
@MechAutoClinic3 жыл бұрын
check the carb
@IrfanKhan-mt4cl5 жыл бұрын
How to adjust rpm of class 350 2018 model without techometer plz suggest
@AbhishekSharma-pu6ui2 жыл бұрын
Hello sir, I want to ask that turning screw clockwise makes the mixture richer or leaner ?? And also i live in hilly areas of himachal Pradesh, should i keep my bike on leaner side or richer side?
@vinayaksawashe95286 жыл бұрын
Much technical...explanation. Thanks
@MechAutoClinic6 жыл бұрын
Thank you for your feedback. Thanks for watching and stay connected.
@Aashish40373 жыл бұрын
Sir mere pass classic 350 h ....screw ki setting 3.5 thi lekin maine 4.0 kri h ab ....bike ki performance better hui h phle se pickup badiya mil rhi h ......lekin aap batayen ki is se engine per koi pressure to nhi padega 4.0 ki setting per
@JiniShady6 жыл бұрын
Thanks for the video, even I've shared the same according to company method. And it said 3.5 anti clockwise..
@MechAutoClinic6 жыл бұрын
thanks for appreciation stay connected.
@manavtalreja43244 жыл бұрын
Yes 3.5 is company official setting
@manav53892 жыл бұрын
Sir will it work for my standard 350 bs4 2020 based on the types of Carburetor u mentioned.
@amitswain13 жыл бұрын
When setting 3 full turns n rpm setting, bike not getting started in 1st kick in the morning. Also felt less power in bike n burning smell when bike starts in the morning. Please advise. I have bullet standard abs 2019 model
@donjoy49123 жыл бұрын
Sir I'm getting 33.5 kmpl mileage on my re classic 350 gunmetal grey (2019) ABS What do to get better mileage.
@drsaiprasaddv4 жыл бұрын
My new bs4 bike came with only 1 3/4 turns...I checked it ..will there be any problem
@hitstraight2 жыл бұрын
Thanks for the best info till date on tuning. Sir, while checking for RPM drop between 2.5 and 3.5, clockwise and opposite, is it better to hear the sound or also follow the RPM meter (mine is BS3 TB350)? I found better avg with 3 setting and carburettor feels cool but wondering if it is optimum. Please advise.
@MechAutoClinic2 жыл бұрын
2.5 to 3 is the best optimum and benchmarked setting for CV carbs.
@satyamovment36512 жыл бұрын
Hi Anna I put carburetors fuel screw in two full rounds .for milage in royal Enfield 350x, it's safe or not ?it's damage engine ? I have small lagyness in bike. Plz reply
@dhananjay5556 жыл бұрын
Very well described bro!
@MechAutoClinic6 жыл бұрын
thank you.
@Aashish40374 жыл бұрын
Hello sir...mere pass classic 350 h ....i m using stock silencer ...engine ke liye harmful to nhi h ye...or best pickup ke liye air mixture kitna loose krna chahiye ...3 round se jyada ? Mujhe pickup jyada chahiye
@abhijitmishra52436 жыл бұрын
Really liked your video sir!, your knowledge is thorough indeed, with a very nice and detailed explanation, subscribed instantly!!.. By the way, i can see ur shop is based in Pune(MH 12), it's a lovely city indeed, i have very vivid and wonderful memories of that place!..
@MechAutoClinic6 жыл бұрын
Yes we are from Pune. Thanks for appreciation.
@SUKHWINDERSINGH-ce9dd4 жыл бұрын
I have standard bs4 and i have intalled bs3 carburetor. How many rounds do i do for my standard. Reply asap
@chandansharma87204 жыл бұрын
Csn u make a vedio on how to align slight bend rear disc plate of classic 350( my one had little bend at the time of puncture repair)
@MechAutoClinic4 жыл бұрын
replacement. cant repair that
@lalitsalve70793 жыл бұрын
Hello sir Sericing madhe gadi la kahi problem nastana suddha fitter ni carburater khole aani tevha pasun gadi cha millage khup drop jhala gadi 20 ch millage deu rahili tr majha prashn asa ahe ki tya fitter ni carborater tr kharab kel nasel na
@emilneboshidip7006 жыл бұрын
Use full information thank you, sir pls kindly make a video on adjusting front forks beacuse when ever my bike goes into un even road it causes some metal sound in front forks
@MechAutoClinic6 жыл бұрын
bike please
@TheGautamece3 жыл бұрын
@@MechAutoClinic sir same happens with my classic 350..
@R147thakur6 жыл бұрын
bahut jabardast sir ji aapke jaise detail me koi bata de to usko royal Enfield ka manager h bana du 😊
@MechAutoClinic6 жыл бұрын
thank you. Stay connected.
@uttambiswas63693 жыл бұрын
Hello Chinmaya, how are you? I am fond of ur work. Would U please tell me whether royal Enfield STD ci use Spark plug with resistance if , what is the resistance? I am glad to inform you that I am an owner of STD ci more than 12 years. Good bless U.
@karansachdeava143 жыл бұрын
Mikcarb settings for the old bullet ...please make a video on that
@manojdavari12195 жыл бұрын
maine abhi bullet 350 Thunder model Ka carburetor official setting check kiya to uska setting is 3 full turns in anticlockwise in 360 degree.
@pravinxp2 жыл бұрын
What's the settings for Electra 5 speed 2010 model?
@adv.r.nparihar45756 жыл бұрын
I am having 1984 standard model bullet just want to know which would be the best carburettor for efficient fuel efficiency and an for an efficiently working
@MechAutoClinic6 жыл бұрын
84 need OEM VM24 only. nothing else. you can go for AMAL as well but very costly. Thanks.
@praduman226 жыл бұрын
Hello Chinmay just came through your video on carburetor tuning, could you also make a video on efi tuning and maintenance for enfield 500 classic. Heard from a few sources that its not advisable to buy a enfield efi. If so then why and if not then I'm ok. Planning on buying a 500 used 10k kms on the odo. I like the way you explain every aspect which makes it easier for us to understand. Thanks and Cheers
@MechAutoClinic6 жыл бұрын
you can't tune the EFI bike..unless you have data logger for that. since the bike is equipped with ECM/ECU/ its own computer you need digital tuner for that. Maintenance issues are there but not that much what others have boasted the matter. Will surely try to make video on this matter. thanks for suggestion.
@praduman226 жыл бұрын
mechautoclinic will wait for the video. No issues as of yet with the efi but still needed to know. Btw thanks for the reply.
@nilotpal_dey4 жыл бұрын
Many thanks for this wonderful video. One thing I want to know. Currently my Apache RTR 160 (2010 model) giving very less milage & pick up issue. I already changed new chain sprocket set,spark plug,air filter, mobil filter & fully synthetic engine oil. So at that moment, should I change Clutch plates ?
@MechAutoClinic4 жыл бұрын
2010 - means 70yr old humanbody. And don't expect marathon from such oldies. You must consider wear and tear of engine internal components rather than only outer. Thanks.
@MechAutoClinic4 жыл бұрын
Unless you feel drag I can't suggest changing components.
@northindian3446 жыл бұрын
Very nice illustration
@MechAutoClinic6 жыл бұрын
Thanks for watching, stay connected.
@smartbullet27646 жыл бұрын
Thanks ,,, Nice informative video and detail explanation
@MechAutoClinic6 жыл бұрын
controversial statement. but thanks for watching and stay connected.
@smartbullet27646 жыл бұрын
Oops it's mistake due to autocorrect I mean detail explanation
@MechAutoClinic6 жыл бұрын
haha...i figured that...but thanks for watching and stay connected.
@dkleand5 жыл бұрын
Sir What if i do only 2 full turn and increase rmp
@EnfieldFitness6 жыл бұрын
Thank u sir in 2.45 turn my uce std 350 giving me local 40 to 45 and highway 45 to 53.thank u sir
@MechAutoClinic6 жыл бұрын
thanks for feedback.
@vishwasdaisal5 жыл бұрын
Please make a video for carburettor tuning for RE bs iv models. Also show some troubleshooting exercises in connection with carburettor and rpm settings
@MechAutoClinic5 жыл бұрын
no difference in bs3 n bs4 carb setting
@Diamondladooo Жыл бұрын
Which carburator is good for mileage sir
@mrtheabsolutebest5 жыл бұрын
Hello sir, thanks for this video. Sir i am facing missing issue in my TB 350 2015 (more during morning time), from last few months. Some kind of jerks / push only on low rpms and more on 1st & 2nd gear. I am using NGK plugs, pls help me
@MechAutoClinic5 жыл бұрын
Change the carburettor vac slide. Open from top u will see worn out slide. Happy riding.
@HariHaran-ki8qr4 жыл бұрын
Sir, will it be alright if I turn it 3.5 turns
@ab99ee6 жыл бұрын
Hello sir Please make video on Hero Impulse's carburetor tunning
@bkumarj64505 жыл бұрын
Awesome sir...got a clear idea
@MechAutoClinic5 жыл бұрын
always welcome
@joecherian64916 жыл бұрын
Great advice sir. Is there anyway I rectify the play in my crank shaft? Is the bearing damaged? if so , do I have to replace all the crank shaft bearings?
@MechAutoClinic6 жыл бұрын
yes....that video will be uploaded very soon. then you will get an idea. if the crank bearing is gone then replacement is the only one option. if you hear grinding kind of sound from crank at any RPM then consider bearings are gone. Thanks.
@joecherian64916 жыл бұрын
Thank you sir. Awaiting the video. I have been experiencing knocking sound while applying throttle, and when the RH cover and cam wheels removed I noticed a play in the crank shaft(couple of mm when forced by hand on all direction). Could it be the wearing down of the bearing? This play in the shaft is leading to back lash, as the exhaust cam sleeve is not able to be adjusted. Apologies for my ignorance on the subject.
@MechAutoClinic6 жыл бұрын
this is the biggest and main manufacturing issue in all RE's.....which causes other things
@vijaymeena50105 жыл бұрын
Aap bata sakte ho kiya is setting se rx last kitna mailage de sakti h
@zakkaaszindagi82734 жыл бұрын
Sir tumcha video me baghto nantar , Like agodarach karto😊
@mototrends49855 жыл бұрын
Sir very good explanation 👌
@MechAutoClinic5 жыл бұрын
thanks
@hasbullamagomedov65203 жыл бұрын
Sir company se kitne thread aate hei for std 350..2017 January model ?
@1774fire6 жыл бұрын
How about a video on tuning carb of a CI engine with vm 24. And how to set the points. Would really appreciate it. Thanks in advance
@MechAutoClinic6 жыл бұрын
hey thanks for suggestion. we will come up with it very soon. thanks.
@stewartpabraj6 ай бұрын
Really great suggestion thnx for explaining well
@MechAutoClinic6 ай бұрын
Most welcome 😊
@mukundthorat56725 жыл бұрын
I have AVL 500 UCAL bs 29 carb..can you do a video on cleaning the jets
@MechAutoClinic5 жыл бұрын
any carb use chemical the way it is shown in video...
@hitarthshah58455 жыл бұрын
Good content but I had a question. I have Thunderbird 350 2013 model so can I install pulsar 220 carb in my RE???
@MechAutoClinic5 жыл бұрын
nope...
@venkateshrao3199 Жыл бұрын
Which handle is this? Pls let me know
@taj.sampathsampath43586 жыл бұрын
Nice video sir I have RE TB 350 just a year old . Shall I tune 3 rotates for better mileage.
@MechAutoClinic6 жыл бұрын
you can try. Thanks.
@piyushjaiswal68073 жыл бұрын
Super Talented Man 👌
@ramachandrankp58075 жыл бұрын
1996 model 350 . How is reset carburettor
@rajmohanty804 жыл бұрын
Is the same method applicable for 2019 thunderbird 350 X ? Because when I checked after my first service it was set to one and half turn...
@MechAutoClinic4 жыл бұрын
Yep
@dineshvaidya45963 жыл бұрын
Very good information. Thank you
@MechAutoClinic3 жыл бұрын
Glad it was helpful!
@vinayshetty20106 жыл бұрын
Thank you so much, Sir If we keep 2.5 do we more mailage
@MechAutoClinic6 жыл бұрын
2.5 to 3....is the setting...in that case you get good mileage...