Simple demonstration of operation of the electrical transformer and electromagnet

Рет қаралды 14,254

2 жыл бұрын

Material for possible replica:
Electromagnet coil; plastic body, 100x35, hole 13 mm.
Soft iron pipe, diameter 110x12 mm.
Winding revolutions, 600-650.
Wire diameter 0.40 mm.
For the correct functioning of the electromagnet oscillation, a power of 700W, 220V is required, connected in series to the electromagnet.
Primary Transformer wire, diameter 0.25-0.30 mm. winding turns, 450-500.
Secondary wire diameter 0.50 mm. winding rounds, 120-130.
Bulb 24V 25W.

Пікірлер: 36

@fidelcatsro6948 2 жыл бұрын

the ac electromagnetic reciprocation impressed me... good idea for making a propulsion motor!!

@allanegleston4931 2 жыл бұрын

fascinating. raises eye brow. bookmarked for future reference . thanks for showing.

@barabolak 2 жыл бұрын

I would put some thicker gloves on.

@adilakbar3053 2 жыл бұрын

😂😂😂

@MechanicForGMCCars 2 жыл бұрын

This guy is amazing 👀

@FMFvideos 2 жыл бұрын

Doesn't that wire get ultra hot?

@electronic7979 2 жыл бұрын

Super

@thomastallis7245 Жыл бұрын

In the second demonstration, is the energy transferred to heat when the rod is inserted and bulbs go out? Does the rod, and coil produce heat when the magnetic field is quenched by the ferrite rod?

@marcelpopescu8754 Жыл бұрын

I GREET YOU WITH RESPECT. PLEASE IF YOU WOULD LIKE TO TELL ME HOW THE TWO SUPERIOR COILS ARE CONNECTED ? THANK YOU VERY MUCH !

@woolysamoan 2 жыл бұрын

Can you do a Stanley Meyer Water splitting demonstration?

@robot797 2 жыл бұрын

you should do a magnetic amp video

@nguyenduyphuong9139 Жыл бұрын

Very and very good idea,this is look like piston enginer and generate toqure from electricity.

@carlosandradedacruzsantosa9059 2 жыл бұрын

Muito show

@TechsScience 2 жыл бұрын

It explains a lot Is that iron rod?

@miedziok9411 2 жыл бұрын

Soft iron pipe, diameter 110x12 mm.

@adilakbar3053 2 жыл бұрын

What is actually soft iron?

@getlist3620 Жыл бұрын

It doesn't short circuit? when you connect primary coil. How many turns u used

@ElectricExperimentsRobert33 Жыл бұрын

You can read the video description.

@jacquespierre798 6 ай бұрын

Cuatas vueltas tiene la bobina

@sohanisatpathy9337 Жыл бұрын

hello, is there any other platform where i can connect with you ?

@MasterIvo 2 жыл бұрын

do it with DC than the magnets sticks when turned off

@adilakbar3053 2 жыл бұрын

Elaborate please why?

@MasterIvo 2 жыл бұрын

@@adilakbar3053 the field lines are un broken so it sticks until broken

@bahyyazidramadhanhendarto5035 Жыл бұрын

Finally Incandescent lamp with Ballast humm

@jacquespierre798 2 ай бұрын

Con que coriente funciona

@shamanskiyoleg 2 жыл бұрын

Это как-то может улучшить качество моей жизни?

@ElectricExperimentsRobert33 2 жыл бұрын

Это ничего не меняет.

@user-wj7wn4ze4o Жыл бұрын

@@ElectricExperimentsRobert33 здравствуйте это вы всё это делаете все эксперименты да? 😁

@adilakbar3053 2 жыл бұрын

Why it is producing too much humming sound?

@ElectricExperimentsRobert33 2 жыл бұрын

The hum is due to the non-perfect coupling of the ferrites.

@killpidone Жыл бұрын

It's effectively an electromagnet hooked up to AC current, as the direction of current oscillates, so does the direction of the magnetic field. The changing of the magnetic field causes anything magnetic near it to align with the direction of the field which is happening at 50Hz. TLDR shits vibrating at 50Hz

@Forgeotism Жыл бұрын

Refer to your video on rotation in liquid mercury caused by magnetic field but Okay I really hope you see this because I've been thinking about this kind of thing for 3 years make a toroidal enclosed chamber (whatever metal you would see to be optimal, perhaps ceramics would help with interference) with the liquid mercury inside of it inside of that put a decent sized number of copper balls or if aqueous copper is a thing maybe that too inside of gold hollow spheres, enough to fill the chamber with no wiggle room for the balls left to right but they can still move within the chamber given the circulation of the Mercury, and on the outside of the toroidal chamber build a alternator or generator type assembly and push about 120- 200 amps through the system. see what happens I guess, hopefully it don't blow up. Disclaimer I do not understand this s*** in the proper way at all so if this makes you laugh I'm glad

@tuttifongul2006 2 жыл бұрын

I have an idea for you but id need to speak far more intelligently than in the comment section. Propulsion is one idea and current generation is another. Im willing to give this away in hopes somebody will just throw it out there so the masses can see

@ConradJupiter77 2 жыл бұрын

What's the idea? you might as well post it if you want to give it away.