Simple how to: Replace & fix worn wiper linkages (Fiat Punto)

Рет қаралды 89,211

8 жыл бұрын

Easy DIY how to: fixing worn and broken wiper linkages with replacement linkage arms and bearings, on a Fiat Punto. Puntos particularly have poor quality plastic bearings that wear and allow their wiper linkages to drop off, breaking windscreen wiper operation. The best fix is to replace the linkages with an aftermarket solution with higher quality bearings.
You will need:
* Screw driver
* 13 mm and 10 mm sockets and socket wrench, or spanners
* Replacement wiper linkages from aftermarket source - Amazon US: amzn.to/2aqveMx | UK: amzn.to/2bYfjnr
* Long nose pliers or mole grip
Optional and OTT:
* Electrical spray and degreaser
* PTFE or silicone based grease
* Dry PTFE or silicone based lube
* Maybe: rust treatment.
(Using the above Amazon links will help support my channel and is appreciated!)

Пікірлер: 46

@CraigsDIY 7 жыл бұрын

Amazon links to relevant products are in the description.

@jonguest2686 8 жыл бұрын

well this video was better than the others I have seen he is talking slow so all can understand him plus he done it step by step.

@PhilipDjaferis 8 жыл бұрын

just had this happen to our old Punto; this being the first 'mechanical' issue we've had with it since buying it new in January 2000 I'll excuse it...great video and explanation. thanks!

@johnpickering1292 6 жыл бұрын

Works perfectly for a fiat panda too - except the water pipe system is attached to the cowl and there are plastic clips underneath to keep the cowl tight against the windscreen - otherwise it's exactly the same. Brilliant, thanks, that's saved me a huge garage bill!

@mikeseager2399 8 жыл бұрын

I thought you did a fabulous video on wiper linkages. Great explanation, superb tone & delivery. I thank you. Mike

@davidmumford9476 8 жыл бұрын

Excellent video, thank you. I just fixed the linkages on my Fiat Punto 2002 model. The linkage broke around Xmas 2015 so I used a tie-wrap as a temporary measure. The tie-wrap lasted 5 months! There was a slight variation on my Punto; there were some rubber straps at either end of the scuttle panel but they unclipped after some 'persuasion'. I do very little DIY on my car and the job took me 1 hr 30 mins - as a guide for others (I took my time)!. Although I do have some mechanical skills. Once again, many thanks.

@simoncrossnz 7 жыл бұрын

Fantastic video, thank you so much. My local garage quoted me $570 for this exact job... I said no.

@ficklefancyfree 5 жыл бұрын

Thanks, just did this to my fiat doblo. Ace tutorial, job done in less than an hour. Have a great Easter

@wesleymarshall7142 4 жыл бұрын

Great video as always. We'll described and very easy to follow even a layman's could follow this repair. Purchased the same parts from said website. So easy to fit following the great instructions in the pack. Seems the previous mechanic did the same weld-on washer trick. Took my longer to grind them off then it did to fit the linkages. Thanks for a great video once again Craig, top man 👍

@keveen2 8 жыл бұрын

Really good step by step. I somehow ended up with the passenger wiper stub lower than it was and so couldn't bolt on the wiper! Yes the plastic cover removal is the most difficult stage.

@kieranmchale7846 7 жыл бұрын

You made this an easy job……which could have taken ages, done in an hour.

@Andraphile 7 жыл бұрын

Excellent video! Clear, well paced speech and clear demonstration made it easy to follow. Thank you.

@norokelt 6 жыл бұрын

very good guide man, thanks alot! also the links to the products in description is great.

@millel2264 8 жыл бұрын

Hi Craig's , nice video. I fixed the linkage wiper just for a while with elastic and plastic band. I am waiting clips steel to fix it better. I have Fiat Punto 1.2 16V ELX Speedgear CVT. Two weeks ago the repair still work. ...just an option to fix the front wiper linkage when the driver doesen't have tools in the boot. I have video also.

@robertstarckhiggins1080 8 жыл бұрын

Just what i needed, many thanks for taking the time to explain how its done....

@rjyoungling220 3 жыл бұрын

Wonderful video, very enjoyable. Cheers buddy

@article21gdpr 2 жыл бұрын

top notch engineering

@tizianotomaselli1518 3 жыл бұрын

Nice vídeo, thanks for sharing 🙏🏻

@m.k3ys 2 жыл бұрын

Life. 👏 Saver. 👏

@jctoyou 7 жыл бұрын

Well done perfect description

@Michael33342 3 жыл бұрын

Welding the washer is a great idea

@jeremycubs2921 8 жыл бұрын

My exact situation now, still awaiting for the replacement to come..This failure could've easily avoided if the ball joints were positioned the other way around, but why Fiat didn't do this is beyond me.

@oldsalty100 3 жыл бұрын

thank u that is just what i needed

@Gamerj2012 4 жыл бұрын

Thanks it helped me a lot

@susancheveralllong7694 2 жыл бұрын

Thank you you are the best 👍

@deborahshipstone3263 2 жыл бұрын

thank you

@johnbumster3950 5 жыл бұрын

Thank you for the very instructive video !

@animal6499 8 жыл бұрын

Great tutorial :o)

@Reddylion 5 жыл бұрын

Good video from Hindustan India....

@jamiehorn44 4 жыл бұрын

Do you also know where the wiper time relay is located? On a Fiat Punto 1999 stille MK1?

@toms8188 8 жыл бұрын

I recommend don't put part on paintwork, it could damage on paint.

@patrickney846 8 жыл бұрын

Great video, very helpful.

@akezinoify 8 жыл бұрын

hi there I have fiat punto 1.2 2007 back side if I push it from right side or left side there is noisy, I consider what's the problem . Thanks

@m.w.pyrodecksmiko1650 8 жыл бұрын

Thanks for that video,

@enlightenednews5265 6 жыл бұрын

Great job. 👌

@oktavijan66 5 жыл бұрын

Need help, How to remove windshield water pump on fiat punto 2 ?

@anterajic9377 4 жыл бұрын

Does the midle scure need to be losen or it need to be tight? please answer if you can help me you can send me video or picture about that scure please

@CraigsDIY 4 жыл бұрын

Scure?

@thomasturner1720 3 жыл бұрын

Thank you, I just fixed own.

@zonavelhalpma 8 жыл бұрын

gerat stuff sir , my FP 1999 188 1.2 8v passanger window front just stoped mid way shit just 2 weeks after i got it and i had a very normal use , the person tha sold the car sayd it maybe be the fuse , i think its the motor , wtf .

@AresGoldie747 2 жыл бұрын

The wind shield wiper of that car was broken

@dragana1940 3 жыл бұрын

Fiat punto

@GlentoranMark 6 жыл бұрын

Googling this problem for my daughters Fiat Panda and the ridiculous prices quoted for a full linkage, I found Craig's solution (thanks for the easy description). I also found another solution here: www.askthemechanic.co.uk/shop/windscreen-wiper-linkage-repair-kits/1-windsreen-wiper-linkage-repair-clip-0722301139585.html. While I haven't fixed the problem, I will be going for the cheaper solution first.