Simple & sturdy table saw can be mobile and save space - DIY Table Saw & Table Router 2in1 Part -1

Рет қаралды 26,567

2 жыл бұрын

Video series of making Table Saw (2 in 1) as well as a Table Router that is easy to assemble and disassemble and can be used mobile. This first series focuses on making table saws that can be disassembled and installed so that they can save space when stored when not in use. The table uses 18mm plywood/multiplex which is attached to the hollow iron frame using FH screws that penetrate the table to make it more sturdy.
Materials:
- Multiplex 18mm size 1200x700mm
- Circular saw 7" "Mailtank"
- 40x40mm square tube (for frame and table legs)
- 60x40mm square tube (for table saw fence)
- Toggle clamp "Wipro TCP-931"
- Emergency push button switch
- 3 hole terminal socket + plug.
- Cable 2x1.5mm
- 30mm strip plate
- Steel bar 10mm
- Hex Bolt + Nut 8mm
- FH bolt + 6mm butterfly nut
- 20x40mm block of wood (for the stopper table saw fence)
- Rubber table mat 40x40mm
- Zinchromate paint "Kansai Paint"
- Silver "Pylox" spray paint
Tools:
- Router machine
- Drilling machine
- Grinding machine
- Welding machine
- Phillips screwdriver
May be useful. Please share, comment and like. Don't forget to subscribe. :-)

Пікірлер: 25

@CelepukEmplep Жыл бұрын

akhirnya nemu juga video bkin table saw utk lahan sempit. auto subcribe ahhhh

@HomeMood Жыл бұрын

Terim kasih sudah berkunjung 🙏

@imanfirmansyah3935 10 ай бұрын

Semoga tambah banyak rezekinya pak... Dan di lancarkan semua urusan bapak amiinnn Mantap pak produk nya👍👍👍

@HomeMood 10 ай бұрын

🙏 Sama-sama Mas. Semoga kelimpahan rezeki dan kebaikan selalu menyertai Anda dan keluarga.. Terima kasih sudah berkunjung

@bilabyatarsibarani7514 2 жыл бұрын

Dr kmrn saya pengen buat yg bgni, bisa bongkar pasang. Kendala ada di waktu saja

@HomeMood 2 жыл бұрын

Selain waktu, kemauan juga Pak yang terpenting :-) Mumpung lagi WFH. Semangat Pak. Terima kasih sudah berkunjung.

@bilabyatarsibarani7514 2 жыл бұрын

@@HomeMood kalo besinya diganti dari besi siku lubang, kira2 kokoh ga pak?

@HomeMood 2 жыл бұрын

Siku berlubang yang biasa buat rak itu ya Pak? Menurut saya sih lebih kuat besi siku biasa Pak. Klo bisa jangan yang ukuran banci 😁. Besi siku berlubang itu kurang tebal dan cenderung agak lentur dan cepat karatan klo cat nya ngelupas.

@bilabyatarsibarani7514 2 жыл бұрын

@@HomeMood oh iya pak ya. Soalnya biar bisa bongkar pasang total pak. Saya tinggal di perumahan 36 soalnya pak. Serba sempit. Hehehe.

@bilabyatarsibarani7514 2 жыл бұрын

@@HomeMood ato kalo kakinya aja dr besi holo 4x4, atas pake besi siku lubang, kuat ga pak kira2?

@abuabdulmuhsin 2 жыл бұрын

Jenis toggle clampnya itu yg vertical apa horizontal?

@HomeMood 2 жыл бұрын

Itu toggle horizontal (gerakan kuncianya maju-mundur, bukan atas-bawah maksudnya) 🙂

@ahmadifairuzi1514 2 жыл бұрын

@@HomeMood merk toggle nya apa pak...mohon bgi link kalau ada

@HomeMood 2 жыл бұрын

tokopedia.link/7SNOk14uuob

@CelepukEmplep Жыл бұрын

pak mohon info dong, utk dimensi meja setalah jadinya. itu lebar berapa, panjang berapa. trus stlah pasang kaki, tingginya jadi berapa. biar dpet patokan ideal nya. maklum masih pemula. biar bisa nentuin beli hollow brpa biji gtu. klo ketauan ukuran nya.

@HomeMood Жыл бұрын

Maap baru reply. Dimensi meja: Panjang= 114cm, Lebar= 70cm. Tinggi meja= 80cm.Terima kasih sudah berkunjung 🙏🙂

@CelepukEmplep Жыл бұрын

@@HomeMood oke pak thanks. Ternyata size nya segitu ya. Tp kelihatan besar meja nya

@zahiraroblox5302 Жыл бұрын

Mau tanya , beli kunci stoper itu dimana ya pak?

@HomeMood Жыл бұрын

Maaf baru reply. Apakah yang dimaksud Toggle Clamp? Klo itu Saya pakainya tokopedia.link/K882jhbmavb wipro 931

@Sdr509 2 жыл бұрын

Pesen kerangka mejanya z bisa kh dan berapa harganya

@HomeMood 2 жыл бұрын

Mohon maaf @mbah darto, itu sekedar hoby, tidak menerima pesanan. Harusnya pesen di tukang las bisa dan mungkin hasilnya lebih baik. Terima kasih sudah berkunjung.