Simple wood corner joints / Woodworking joints / Ahşap birleştirme teknikleri

  Рет қаралды 7,899,786

Celal Ünal

Celal Ünal

3 жыл бұрын

Merhaba arkadaşlar. Bu ahşap çalışmasında basit ahşap birleştirme tekniklerinden bazılarını gösterdim. Videoyu simple wood corner joints woodworking joints ahşap birleştirme teknikleri isimleriyle yükledim. Bu ahşap projem çok keyifli oldu. Ahşap atölyemdeki kısa tahtaları da bu şekilde değerlendirdim. Arkadaşlar ahşap işçiliğini gerçekten çok seviyorum. Ahşap projelerine ilgi duyan herkesin çok güzel bir atölyesi olmasını diliyorum. Bu videoda, alın eklemi, yivli gönye bağlantısı, dübel gönye bağlantısı, sahte parmak bağlantısı, parmak bağlantısı, kutu eklemi, sahte kırlangıç kuyruğu birleştirme, kırlangıç kuyruğu birleştirme yöntemlerini gösterdim. Bu ahşap işçiliğinde, kutu bağlantı jig, yivli gönye bağlantı jig, masa testere yivli gönyeler, gönye yivli jig, yönlendirici masa yivli kızak yönlendiriciler de gösterdim. Bu ahşap birleştirme teknikleri ile çivisiz ahşap tasarımları yapılabilir. Umarım beğenirsiniz. İzlediğiniz için çok teşekkür ederim. Sağlıklı kalın.
Hello friends. In this woodworking work, I have demonstrated some of the simple wood joining techniques. I uploaded the video under the names of simple wood corner joints woodworking joints wood joining techniques. This wood project has been very enjoyable. This is how I used the short boards in my wood workshop. Friends, I really like woodworking. I wish everyone who is interested in wood projects to have a very nice workshop. In this video, I showed butt joint, splined miter joint, dowel miter joint, mock finger joint, finger joint, box joint, mock dovetail, dovetail joint, mitred through dovetail wood joints. In this woodwork, I also showed box joint jig, splined miter joint jig, table saw splined miters, miter splined jig, router table splined sled routers. Wood designs without nails can be made with these wood joining techniques. I hope you will like it. Thank you very much for watching. Stay healthy.
#woodjoints #woodworking #joinery

Пікірлер: 6 400
@defneunal6831
@defneunal6831 2 ай бұрын
Merhaba baba ben kızın yaptığın ahşap birleştirmeler çok güzel olmuş benim marangoz babam iyiki benim babam sın seni çok seviyorum ve her zaman seni yüreğimle destekliyorum canım babam ❤❤
@CelalUnal1
@CelalUnal1 2 ай бұрын
Merhaba guzel kizim çok cok tesekkur ederim. Calismami begendigine cok sevindim. Calismalarimi desteklemen beni ayrica cok mutlu etti. Seni cok sewiyorum guzel kizim kocaman optum.❤️❤️
@Mimarlife
@Mimarlife 2 ай бұрын
Merhaba dostum numaranı gönderirmisin
@abhinavprakash007
@abhinavprakash007 2 жыл бұрын
Nobody in the history of youtube has gotten my subscription so quick. Thank you so much for this!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much.🙌🙌🙌😊
@shirocp
@shirocp 2 жыл бұрын
This is probably the best miter corner methods I’ve seen in a while. My favorite are the splines with “x” pattern. Also, the jig you used with the router to make dove tails is legit. You did those so fast with the jig. All of those alternatives were awesome! Thanks for sharing!!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@angelaandreaherreralopez8504
@angelaandreaherreralopez8504 Жыл бұрын
Ñ
@JC-77
@JC-77 Жыл бұрын
Definitely the splines with "x" patterns are very cool.
@johnnycorn7225
@johnnycorn7225 Жыл бұрын
​@@CelalUnal1 I would love adding the x splines as a finishing touch to my speaker boxes natural wood finish. Celal, what would be your recommendation to put these on a large already made box instead of putting them on a small piece with a table saw? I saw an example where a guy had a router sled for his palm router and he was doing dovetails across the corners and tapping them through that look great. Any jigs or techniques that you recommend??
@user-pw2bf1ju7f
@user-pw2bf1ju7f 9 ай бұрын
😅😂
@eliasking3015
@eliasking3015 Жыл бұрын
Seriously underrated video. Even in fast forward there is so much to learn not just about the joints, but also cutting tool technique,jig construction, and error correction. Without speaking once
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@PluschikovAF
@PluschikovAF 3 жыл бұрын
Лучше один раз увидеть, чем сто раз услышать! 👍🔥👍 Отдельное спасибо за отсутствие "воды"-лучший формат видео! 👍👍👍🤝
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.😊😊🙌🙌
@vvvideo_d123
@vvvideo_d123 3 жыл бұрын
Ролик просто супер! Без лишних слов и пафоса как у некоторых "столярных гуру",только самое необходимое,давно такой искал,всё очень наглядно! Лайк и подписка!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.
@jacklondon4753
@jacklondon4753 3 жыл бұрын
Это точно. все в одном месте
@user-wp5kd4fm4u
@user-wp5kd4fm4u 3 жыл бұрын
У некоторых получился бы столярный сериал, по серии на каждое соединение. Правда у сериалов свои плюсы, подробнее описание, и всяческие подводные камни описывают.
@Devil-Made
@Devil-Made Ай бұрын
Amazing video! These are the kinds of videos I love to find. You don’t waste time introducing what you’re going to show us - you just show us. And you don’t stop to give yourself screen time and explain - you just do it. And you don’t slow and dumb everything down - we can rewind and pause, so why would you? So many great woodworkers don’t make videos for KZfaq - they make videos for themselves. But this is the kind of video I can learn from and come back to as reference. Btw, we have nearly the same tools, even down to the carpenter’s square. Lol. You showed me what can be done with what I have in ways I hadn’t realized. Thank you!!
@CelalUnal1
@CelalUnal1 2 күн бұрын
Thank you very much. I'm so glad you liked it. It was really fun to read this comment. I wish you good work.
@VOICEFORFREEDOM1776
@VOICEFORFREEDOM1776 2 жыл бұрын
Your craftsmanship in nothing short of incredible. Your love for this shows. The equipment is an extension of your body no longer just a tool. It’s as if you’re honoring the tree that was milled. I hope to get to be as half as good. Thank you for sharing this!!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@nsw1959
@nsw1959 3 жыл бұрын
I've been a woodworker for 35 years and this is about the best representation of the types of joints one can make that I think I've seen. even shows how to fix a mistake. Well done.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@johnnycorn7225
@johnnycorn7225 Жыл бұрын
Hey Rich, I build large speaker boxes, and I love leaving the natural wood finish on them. I'm really wanting to add the x- style spline joints ( dovetails and dowels too) to my large finished boxes instead of just using screws and glue. Any recommendations on how to add these to an already finished large box as a finishing touch? I saw a track style jig for my DeWalt Palm router that would allow you to clamp up to the corner of a big box and then run the router over the corner perfectly through. Would this be your recommended way? I'm getting excited thinking about the beautiful visual impact of those x-splines, dovetails, and dowels alternating on my faceplates. Some of them are very high power systems and I need that extra strength from more glue surface and want that aesthetic appeal too. Any advice greatly appreciated 👍
@williamreymond2669
@williamreymond2669 3 жыл бұрын
I really appreciate how Celal and other KZfaqrs have solved the language barrier so artfully with their skillful video production. I'm sure a lot of thought went into it.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much.😊🙌🙌
@user-pw2bf1ju7f
@user-pw2bf1ju7f 9 ай бұрын
​😊❤
@user-lo5xw2mp3r
@user-lo5xw2mp3r 2 жыл бұрын
Большое вам спасибо, за то что не поленились снять такое познавательное видео. Все показали точно, кратко без лишних заморочек. Вы настоящий мастер. Крепкого вам здоровья, любви, счастья!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Спасибо. Я рад что тебе понравилось.😊🙌🙌🙌🙌
@worsedarkdoom2357
@worsedarkdoom2357 2 жыл бұрын
This is the best, simple-and-effective corner tutorial that I've seen. Lots of creative, yet simple corners included, too! Thank you for making this!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@user-hi8kj1gk2p
@user-hi8kj1gk2p 3 жыл бұрын
Вот это по нашему, по Бразильский пальцем клей намазывать! Шутка:0))). Ролик отличный! Столько информации за один раз. Спасибо огромное!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
:) Огромное спасибо. Рад что вам понравилось. 🙌🙌🙌🙌
@JustWatch061
@JustWatch061 3 жыл бұрын
ReiS Rusça yazmak zor iş. 😃😃
@CelalUnal1
@CelalUnal1 3 жыл бұрын
@@JustWatch061 valla oyle:)
@foam_concrete
@foam_concrete 3 жыл бұрын
Подробно показано и главное без "воды" и самолюбование. Заслуженные лайк и подписка.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.
@stanrob59
@stanrob59 Жыл бұрын
Celal! Thank you for the start to finish on each process. It helps to see it all and I mean ALL steps in each set you provided. After I'm done with my cabinet, I'm going to do some small boxes with some of your techniques to practice for my retirement projects for corporate gifts.
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.🙏😊🙏
@danielhanawalt4998
@danielhanawalt4998 Ай бұрын
Beautiful work. Can't think of a better way to spend 20 minutes than watching something like that.
@CelalUnal1
@CelalUnal1 23 күн бұрын
Thank you. I'm glad you liked it.
@alexvrk8538
@alexvrk8538 3 жыл бұрын
Наглядно, лаконично, подробно - великолепная подача материала. Спасибо, автор! Пойду смотреть, что ещё есть на канале - если остальное в таком же духе, то это однозначно подписка.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.
@EnvisionGW
@EnvisionGW 2 жыл бұрын
essa definitivamente é a assinatura dele!, eu acompanho esse canal desde dos primeiros vídeos! e se tem alguém que mereceu está onde está é ele... dedicado e muito talentoso... qualquer conteúdo que achar no canal dele é excelente! inclusive. é meu ponto de referencia!
@whitsixkiller
@whitsixkiller 3 жыл бұрын
As someone who works with his hands. It's always fun to see another's craft and acknowledge their mad skills. Bravo sir.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@user-tt4uv9de4z
@user-tt4uv9de4z 3 жыл бұрын
@@CelalUnal1 ро
@preacher1775
@preacher1775 Жыл бұрын
Many times in the past, I have admired the joints made by others and wondered how they did it. This guy, without saying a word, made the perfect video about doing just that! He made it look so simple. But mainly, by this video, he gave me the simplest but the best joints imaginable! He's a genius!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@2008mmvii
@2008mmvii 2 жыл бұрын
Kudos to you, big time. No boring music, story telling, advertising or self-promoting, pets wandering around, lame jokes, etc. Straight to the point and simple to understand. Creative indeed, and just let the vid tell the whole story. My critique, however, is that not all examples are simple because they involve more tools, making jigs, and lots of cutting.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@sdmitrnik
@sdmitrnik 3 жыл бұрын
Очень достойное видео! Одно из тысяч,которое доносит всю информацию без слов и по полезности, полезнее йогурта 😁 одно из тысяч,что достойно сохранения в архив!!!👍 Подписался!!!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.🙌🙌🙌😊😊
@donaldhamel9311
@donaldhamel9311 3 жыл бұрын
You sir are a true educator, you teach by doing, and they learn by watching, which is the way I have educated myself in the 63 years I've been in this world and from the time I was 19 I never looked for a job, being a graphic artist, woodworker and metal fabricator, all the jobs I had over that time came looking for me, and never once went to college, but I can say I'm still learning, even from younger guys like you. Now I'm going out to my shop and create some new jigs, thanks to you, thank you very much
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you very much, master. I am very glad that you like it. It's really nice to hear from you. I'm sure there is a lot to learn from you. Regards, greetings, master.
@alikiyak42
@alikiyak42 9 ай бұрын
Oynatma listesinden önüme düştü video. Kanal sahibine falan bakmadan izliyordum. Yabancılar ne güzel işler çıkarıyor deyip tam ingilizce yorum yazacakken ülkemden bir insanla karşılaşmak ne kadar mutlu etti bilemezsin. Eline emeğine sağlık kardeşim. Bu video resmen bir ders gibi olmuş, tekrar tekrar izlemeli. İyi çalışmalar 🙏👏👏👏
@CelalUnal1
@CelalUnal1 7 ай бұрын
Çok teşekkür ederim. Beğendiğine çok sevindim. 🙏🙏🙏
@Doom_Stoner_Rock_for_RU
@Doom_Stoner_Rock_for_RU 2 жыл бұрын
Спасибо огромное!!! Это гениально! Вашему видео нет цены! Я как начинающий мастер просто счастлив его нахождению!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Спасибо. Я рад что тебе понравилось.
@dteberle
@dteberle 3 жыл бұрын
This video should be titled: "How to make awesome tablesaw jigs" This is so awesome!
@pietrozambon7687
@pietrozambon7687 3 жыл бұрын
Cos’è questo
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you for watching.
@swagtactical9255
@swagtactical9255 3 жыл бұрын
i know right? just bought my first, and im happy with it but that little sliding table is exactly what im going to steal first from this vid :)
@jumbolaidajumbolaida1203
@jumbolaidajumbolaida1203 3 жыл бұрын
Малотчик, нет слов. Просто идеальные, красивые и прочные соединения, возьмём на заметку. Спасибо за видео обзор. 🤝
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.
@domingosperez5280
@domingosperez5280 2 жыл бұрын
Achei muito interessante e simples a primeira união. Todas são muito boas.
@ahceneboumahraz6570
@ahceneboumahraz6570 2 жыл бұрын
De ni
@rakeshvashisht7268
@rakeshvashisht7268 2 жыл бұрын
ऋनध।।।।
@jumbolaidajumbolaida1203
@jumbolaidajumbolaida1203 2 жыл бұрын
@@rakeshvashisht7268 👍🤝
@abeloewy5458
@abeloewy5458 Жыл бұрын
I've been looking at many youtube videos for wood crafting ideas and examples. This video was great. A very simple and elegant set of corner joint designs that look beautiful when finished. Also I like how the builder showed us in detail how he made the tools he used to create some of these. Very well made. Ahşap işçiliği fikirleri ve örnekleri için birçok youtube videosuna bakıyorum. Bu video harikaydı. Bittiğinde güzel görünen çok basit ve zarif bir köşe bağlantı tasarımları seti. Ayrıca inşaatçının bize bunlardan bazılarını oluşturmak için kullandığı araçları nasıl yaptığını ayrıntılı olarak göstermesi hoşuma gitti. Çok iyi yapılmış.
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you very much. I am so glad you liked it.
@jerryhammond2730
@jerryhammond2730 2 жыл бұрын
This is just what I've been looking for. Great video about corner joining. You show step by step, even how to set up the jigs necessary for some of the joints. Thank you for this excellent video.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@user-zi4td2zx1q
@user-zi4td2zx1q 3 жыл бұрын
Руки и голова растут откуда надо. Молодец! В гараже на коленке не все соединения получатся, но некоторые можно применить. Респект мастеру :)
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.
@goddale2002
@goddale2002 3 жыл бұрын
You're proving that true woodworking is about skill and creativity and not high tech.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.🙌🙌🙌😊😊
@El-Sid-Ldn
@El-Sid-Ldn 2 жыл бұрын
Excellent work my friend. The finish of the joint at 8:10 is stunning (will definitely be trying that). This video made me want to get straight into the workshop. Very creative and inspiring 👍🏽👏🏽
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@ddupagne
@ddupagne Жыл бұрын
Merci ! Meilleure vidéo sur les assemblages d'angle
@CelalUnal1
@CelalUnal1 Жыл бұрын
Merci beaucoup. Je suis si heureux que vous l'ayez aimé.🙏😊
@user-yp5ph9mf5n
@user-yp5ph9mf5n 3 жыл бұрын
Душа поёт когда смотришь это видео. Спасибо вам. Всех благ.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Спасибо. Рада что вам понравилось.😊😊🙌🙌
@quintonsuyker6526
@quintonsuyker6526 3 жыл бұрын
Artwork. It is pure art. As a woodworker for years i truly appreciate this true craftsman ship . Thank you for sharing
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@peteford4388
@peteford4388 2 жыл бұрын
Thanks, I enjoyed this a lot. I wish I had the space to have a table saw, it would save so much time. I love Japanese saws too, so versatile.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@julin2rs548
@julin2rs548 Жыл бұрын
This video is AMAZING. My dad was really good at everything and built two of our homes. It is just unreal what you can build by yourself (with tools) and youtube's guidance.
@musaedjassim9678
@musaedjassim9678 2 жыл бұрын
Thank you for sharing this content. Very helpful and you made everything looks easy while i am sure it’s not. I can only tell you that this is most amazing step by step video i’ve seen in youtube. Great job👏🏽👏🏽
@Moriibund419
@Moriibund419 3 жыл бұрын
I love all the hand made jigs instead of some expensive store bought jigs, dato blades and specialty saws . Amazing ingenuity.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.🙌🙌😊😊
@bleucheeselove
@bleucheeselove Жыл бұрын
I was mesmerized watching you work! Those are beautiful and you make it look so simple! I've never seen the different methods. Clearly a seasoned natural craftsman. 💯
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@michaelriley2279
@michaelriley2279 3 жыл бұрын
60 years ago I started my apprenticeship as a cabinet maker, my bench master was a Welshman who taught me all of these joints and a few more, but back then we didn't have the hand power tools of today so most of it was by hand. I wish I had a Japanese pull saw for trimming the splines and the small sliding saw would have been handy. You Sir are a true Craftsman and I take my hat off to you. I also liked your technique for filling the overcut dovetail too.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it. Greetings from Turkey.🙌🙌🙌😊😊
@aaronluckette
@aaronluckette 3 жыл бұрын
@@CelalUnal1 After your inspiring video, I am looking to buy a Japanese pull saw. What is the exact kind you have here (7:37)? I'm not sure I like the one's with a back "spine" because I would think they might cause a slight bend in the cut when doing something where the spine will hit the workpiece...so I like yours...but can't find it. Thanks so much! Love your video!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
@@aaronluckette In fact, each type should be for a separate job. Those with upper keels are very nice for swallow joining. There are also bilateral corners. This can be preferred. Mine is with a thin blade and one-sided. A handy Japanese saw.
@aaronluckette
@aaronluckette 3 жыл бұрын
@@CelalUnal1 I bought the "SUIZAN Japanese Hand Saw Pull Saw 7 Inch Flush Cut Saw Trim Saw for Woodworking"...it bends too much. On my test-piece, it started cutting into the piece near the edge (I am doing exactly what you've shown at 7:34). I need one that will not bend but does not have that spine. Do you know EXACTLY what one you bought? I literally want to buy that same exact model but cannot find it. Thanks again! Cheers!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
@@aaronluckette The saw you bought is very nice. If there is no hard straightening profile on the saw, it will bend when it is pressed too hard. Since I cut it slowly, there is not much bending. But when there is a fast speed cut, sometimes there is a twist. It's a little sensitive. I hope I've spelled correctly.
@arifalmazov5396
@arifalmazov5396 3 жыл бұрын
Ювелирная работа! Видно что, мастер профессиональный и талантливый. Турки - очень талантливые люди.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Спасибо. Рада что вам понравилось.
@user-kt3dx8ty6l
@user-kt3dx8ty6l 2 жыл бұрын
Просто приятно смотреть на вашу работу, руки у вас в полном порядке, спасибо!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Спасибо. Я рад что тебе понравилось.
@p1ekid
@p1ekid Жыл бұрын
This video might just have saved me. I’ve decided to do a complex woodworking project for my dads birthday. I’ve been doing joinery on houses for years but that work is all about speed and it’s not visible so I don’t normally care if you can see the fixings etc. My dad was a woodworking teacher for 30 years so I need some good looking woodwork and I think this video might just help me do that. Thanks!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@Boatswain_1961
@Boatswain_1961 3 жыл бұрын
Все соединения прекрасны, а то, где вставки крест-накрест получаются, просто бесподобно, как шнуровка! Даже если не пригодится, просто смотреть на такую профессиональную работу увлекательно!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.
@maradall
@maradall 3 жыл бұрын
Beautiful work! Some of my earliest memories are of sitting on the workbench & watching my Dad carefully chisel out dovetail joints... it was in the days way before table saws, but 60+ years later those drawers are still 100% solid, no matter the rough treatment from 5 kids.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@jennknows_
@jennknows_ 2 жыл бұрын
You Sir are FANTASTIC! I have just sat for an hour on my home tv and watched videos. I love all of your work. I’ve learned so much.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@johnkramer6593
@johnkramer6593 Жыл бұрын
I greatly appreciate you sharing these techniques. It has truly inspired me to know that this type of joinery can be achieved with the tools that you are using. Thank you!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@tmaloney2027
@tmaloney2027 3 жыл бұрын
The jigs are the most beautiful of all. You can see his hand movement's built into their designs.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@user-kc6iw3cj2j
@user-kc6iw3cj2j 3 жыл бұрын
Браво! Все чётко и по делу, без лишних слов.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.
@bolatdauylpaz6952
@bolatdauylpaz6952 2 жыл бұрын
Я айтишник, но люблю работать с деревом дома. Поэтому огромное удовольствие доставило данное видео.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Спасибо. Я рад, что тебе понравилось.
@mowburnt
@mowburnt 2 жыл бұрын
Fantastic! I was not feeling very confident about corner joints then saw how easy it is to make some great looking and strong joints. Thanks!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@billsedutto8824
@billsedutto8824 3 жыл бұрын
There’s nothing like hand cut dovetails. That’s on my list of things to learn how to do but will have to start with the basic joints first. Great video!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@Demetrio_MCK
@Demetrio_MCK 3 жыл бұрын
Сразу видно: первоклассный столяр. Такой большой опыт, а все пальцы целы! :)
@CelalUnal1
@CelalUnal1 3 жыл бұрын
:))Огромное спасибо. Рада что вам понравилось.
@Demetrio_MCK
@Demetrio_MCK 3 жыл бұрын
@@CelalUnal1 И вам спасибо! Я плотник, и хочу сделать для себя столярную мастерскую. Мне было ОЧЕНЬ интересно посмотреть на вашу работу.
@danielwhitaker5445
@danielwhitaker5445 Жыл бұрын
... this was as relaxing as a triple straight, slow sippin' bourbon on my porch while it rains evening! Sincerest Thanks Celal for sharing your woodsmithing passion!!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much.
@theweatherisaokay4964
@theweatherisaokay4964 2 жыл бұрын
Super fast, clear and simple to understand tutorial. Best I've ever seen.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@colejohnson1960
@colejohnson1960 3 жыл бұрын
Thank you for taking the time to make this video and sharing it. This one is a keeper as I plan on using some of these joints when I start my box building. You have excellent woodworking and video making skills.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.😊😊🙌🙌🙌
@matthewrhoades5156
@matthewrhoades5156 3 жыл бұрын
Wow! This how-to video is incredible. This person makes the joints look so easy; but you know there is a lot of skill involved. Really exceptional camera work! I really liked the table saw sled ideas. I also really liked the hand-cut, mitered dovetails near the end. Beautiful work! Hang on until the end for the complete review. This guy is really, really talented.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it. Greetings from Turkey.😊😊😊🙌🙌🙌🙌
@taylorsessions4143
@taylorsessions4143 3 жыл бұрын
You know a guy has developed his talent when he can make something look easy. I have fallen for it in the past, and it's humbling to go try it myself!
@prgelectric5104
@prgelectric5104 2 жыл бұрын
I was thinking the same thing he makes it look easy. The amazing thing is the free hand angle drilling imo. I am very good with tools for over 20yrs and I would likely mess up one myself. That jig he made up is really awesome as well. Great video !
@jakeclinton6571
@jakeclinton6571 Жыл бұрын
You sir are a masterful carpenter, and I feel that's the best woodworking tutorial I've ever seen, without saying a word! Thanks so much, I'll be watching this dozens of times I feel
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@weehaggis478
@weehaggis478 2 жыл бұрын
Thank you for taking the time to share this. Very informative and easy to follow. You are quite simply inspiring!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@howardbecdove9780
@howardbecdove9780 3 жыл бұрын
Wow! By the time this video came up in my feed, it was more than a year old. You are a master. All done with a make shift vice, a job site tablesaw , chisel and a Japanese pull saw. Beautifully presented too. Subscribed. Thank you for all that content.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad you liked it.
@DanKoning777
@DanKoning777 2 жыл бұрын
I don't understand This video was posted on Jan 19, 2021, but it first "came up in your feed more than a year old" when it's only Nov 14, 2021? Is this a re-upload of the original video? I'm only curious and asking to see if I'm missing something; thanks.
@sandrobarigelli8054
@sandrobarigelli8054 3 жыл бұрын
I’d need something more and more than “I like” for this guy. Awesome job man, thank you.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@heartobefelt
@heartobefelt 2 жыл бұрын
@@CelalUnal1 much higher quality than many videos on KZfaq these days Celal . superb work :)
@tenj00
@tenj00 2 жыл бұрын
@@CelalUnal1 I think Sandro is asking you for a way to donate to you. :)
@harpshirefarm323
@harpshirefarm323 Жыл бұрын
Thanks so much for this video!!! I was ready to subscribe as soon as I realized there would be no music but your skill and technique sealed the deal, so to speak. I'm just a beginner woodworker with limited tools and knowledge but you greatly inspire me. Thank you
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@paraplegichistoricalsports5700
@paraplegichistoricalsports5700 2 жыл бұрын
The 3rd one is incredibly ingenious and very dang strong, loved it so much I am stopping the video. I bought a bunch of new power and hand tools today and got to build a box tomorrow utilyzing your 3rd method, thanks bru!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@kieranfoster902
@kieranfoster902 3 жыл бұрын
Nice ideas. I really liked the angled splines. They looked really smart.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@Gorrhyse
@Gorrhyse 3 жыл бұрын
Ive been feeling inspired to take up some woodworking as a hobby again. This video sealed the the deal. You man, are absolutetly legend for putting together such an informative and pleasureably to watch video!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@socalduck1
@socalduck1 Жыл бұрын
I agree with the comments below. This is the best and simplest corner tutorial that I've ever seen. Thank you so very much.
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you very much. I am so glad you liked it.
@4stringbloodyfingers
@4stringbloodyfingers 2 жыл бұрын
the last technique i wouldn't call it easy. its pretty advanced stuff. and u really need to have to be precise there. all in all, good job and thanks for the post.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@user-si6ku3zy2s
@user-si6ku3zy2s 3 жыл бұрын
Прекрасно изложенный материал, БЛАГОДАРЮ за ролик! :о) Успехов в вашем увлечении!!!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.
@sonyaqua281
@sonyaqua281 3 жыл бұрын
Респект и уважуха столярам какие делятся секретами , а не забирают их с собой в могилу🖒
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рада что вам понравилось.
@philipcatuogno2968
@philipcatuogno2968 2 жыл бұрын
I'm a rookie woodworker and am inspired to strive to be half as proficient as you are. BRAVO! Molto bene!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@There.Their.Theyre
@There.Their.Theyre 2 жыл бұрын
This is a skill set that I don't have. I don't have the tools, the talent, or the materials. I have nothing in common with this man at all, I imagine. But I couldn't stop watching this as he created amazing works of art. Bravo!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@freedomtrailamerica2981
@freedomtrailamerica2981 3 жыл бұрын
Thank you for sharing your years of experience. Your lessons are very clear❤
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@Ozninjaguy
@Ozninjaguy 2 жыл бұрын
Great work - inspiring, and also showed me what extra things I can do with my table saw. Thank you!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@user-cj3zk1jg4k
@user-cj3zk1jg4k Жыл бұрын
Круто! Эстетический выбор дело вкуса каждого человека. Интересно практическое применение. К этому видео добавить часть с испытанием на прочность, цены бы не было! Автору однозначно лайк!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Спасибо. Я рад что тебе понравилось.
@alanfreedman5877
@alanfreedman5877 2 жыл бұрын
I love these techniques. I just applied the dowel technique from 2:10 to 4:05 and it came out really nice. Going to try some others today. Thanks.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it. I wish conveniences.
@takoyucky
@takoyucky 3 жыл бұрын
I don’t do woodworking but I appreciate your craftsmanship and the effort that went into making the video!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.🙌🙌🙌🙌😊
@ronperalta7218
@ronperalta7218 3 жыл бұрын
An true artist, using a few low cost tools to produce beauty. I'm inspired by you. Many thanks.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@mrJv2k7
@mrJv2k7 3 жыл бұрын
low-cost tools? that table saw looks kinda nice. and by nice I mean pricey :)
@tripityourself
@tripityourself 2 жыл бұрын
Incredible dedication and attention to details! Not what I call 'simple' but definitely some I want to try. Thanks for sharing :)
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@northmillstudio
@northmillstudio Ай бұрын
I absolutely love that angled miter spline technique around 7:29, that is so cool. Definitely will have to try that
@CelalUnal1
@CelalUnal1 2 күн бұрын
I'm so glad you liked it.
@RoyalGentoo
@RoyalGentoo 3 жыл бұрын
I don't normally comment about videos, but your examples of different corner joints was extremely entertaining and informational. Fun to watch! Thank you for your efforts. I'm going to try some of these!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.😊🙌🙌🙌
@user-he8um9wx7k
@user-he8um9wx7k 3 жыл бұрын
Ай молодца! 👍 Ничего лишнего 💪✨💯
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.
@GroundedFlyboy737
@GroundedFlyboy737 Жыл бұрын
Wow, thank you for putting this excellent joint tutorial together for us! Beautiful.
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.
@gedsoft3793
@gedsoft3793 2 жыл бұрын
Excellent ingenuity and skill, you're giving everyone new ideas I think :) Splines are cool but I loved the last one best, with the dovetails + mitres.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@koryak006
@koryak006 3 жыл бұрын
Thank you for sharing man. This man's carpenter skills are really high.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@user-zc3de9sx5d
@user-zc3de9sx5d 3 жыл бұрын
Просто смотреть - огромное удовольствие. Молодец! Удачи и успехов в труде.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Спасибо. Рада что вам понравилось.😊😊🙌🙌🙌
@dianakesl1814
@dianakesl1814 2 жыл бұрын
I'm a beginner late in life and this shows me how much I have to learn. This man is amazing. ( Russell)
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@user-geranin
@user-geranin 2 жыл бұрын
Eğer büyük bir usta. Dersler için teşekkürler. Videolarınızı izlemek çok güzel.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Çok teşekkür ederim. Beğendiğine çok sevindim.
@msgajhimelret9496
@msgajhimelret9496 3 жыл бұрын
Wonderful craftsmanship; thinking of using these on the corners of my workbench in 2x4s, different one for each corner... why not.. just the wood is longer and thicker.. Thank you for sharing
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. 🙌🙌😊😊
@yokebuk333
@yokebuk333 3 жыл бұрын
Делаю первые шаги. Очень полезное видео!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Огромное спасибо. Рад что вам понравилось.Желаю удобства.
@dirkdigglerxxxx
@dirkdigglerxxxx 2 жыл бұрын
Found this by accident, absolutely loved your video, beautiful woodworking and ingenuity. Inspiring work, thank you for sharing. 😀
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@mallendo
@mallendo 2 жыл бұрын
First-class craftsmen. Learned something again.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@williamreymond2669
@williamreymond2669 3 жыл бұрын
17:00]. I love that tiny stub-chisel! Gotta make one of those.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@macmusic12
@macmusic12 3 жыл бұрын
wow, what a brilliant idea, I'm not a carpenter but I really enjoyed your work, you're one of the best, a true master 😲 💖 🌹
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@Jamie-Smith
@Jamie-Smith Жыл бұрын
Thank you so much for this. I can't stop watching it. My favourite is the splined mitre joint but that jig looks like a menace to make and get the angles right. By the way, I love how you start sawing off the tabs gingerly and can't wait to finish by the end!
@CelalUnal1
@CelalUnal1 Жыл бұрын
Thank you so much. I am so glad you liked it.🙏🙏😊😊
@Kanfir
@Kanfir 8 ай бұрын
Thank you very much for your skill shearing, thank you for your smart and beautiful tips!!!!!!!
@CelalUnal1
@CelalUnal1 7 ай бұрын
Thank you very much. I am so glad you liked it.
@pascalfoyart2652
@pascalfoyart2652 3 жыл бұрын
Many thanks for your demonstration , I've save the video for my library! Continuous like that simple and humble.
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
@davidottley2739
@davidottley2739 3 жыл бұрын
This was amazing and so helpful! You are incredibly talented!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. I am very glad that you like it.
@gamrgrex
@gamrgrex 2 жыл бұрын
I can watch this all day! Very well done! I think my favorite is the kerf line filled that is not at an angle. Some nice dark wood against light wood... so nice!
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Thank you so much. I am so glad you liked it.
@slm6649
@slm6649 2 жыл бұрын
Vallahi tam bana hitab ediyor.. çok basarili ve faydalı buluyorum calismalarini Celal kardeş sağolasın.
@CelalUnal1
@CelalUnal1 2 жыл бұрын
Çok teşekkür ederim. Beğendiğine çok sevindim.
@aainn
@aainn 3 жыл бұрын
I can only imagine how much time you spent on making video montage. Fantastic!
@CelalUnal1
@CelalUnal1 3 жыл бұрын
Thank you so much. Glad you liked it.
Making dowels / How to make dowel maker
8:48
Celal Ünal
Рет қаралды 3,9 МЛН
Wood joints / Wood corner joints / Woodworking
12:39
Celal Ünal
Рет қаралды 721 М.
The World's Fastest Cleaners
00:35
MrBeast
Рет қаралды 109 МЛН
MINHA IRMÃ MALVADA CONTRA O GADGET DE TREM DE DOMINÓ 😡 #ferramenta
00:40
Barriga de grávida aconchegante? 🤔💡
00:10
Polar em português
Рет қаралды 18 МЛН
ISSEI funny story😂😂😂Strange World | Magic Lips💋
00:36
ISSEI / いっせい
Рет қаралды 58 МЛН
What's the Best Wood Joint || Insanely Strong Joinery!
25:34
Bourbon Moth Woodworking
Рет қаралды 1,3 МЛН
Forestry Machinery wood splitter for camping
0:16
CHANGTIAN
Рет қаралды
Wood corner joints / Woodworking joints / Part 2
20:23
Celal Ünal
Рет қаралды 2,8 МЛН
How to make box joints easily without any jigs
5:55
Woodworking Finland
Рет қаралды 2,1 МЛН
15 woodworking basics you should know
13:20
DIY Montreal
Рет қаралды 785 М.
This Simple Joint is Stronger Than a Dovetail!
17:37
Scott Walsh
Рет қаралды 386 М.
SUPER SUPER Simple Dovetail Joint
6:15
GRINwood
Рет қаралды 3,7 МЛН
Woodworking / Wooden joints part 1
20:02
Celal Ünal
Рет қаралды 2,2 МЛН
THE SECRET of the Old Masters of CARPENTRY | Woodworking Tricks and Tips for Beginners
4:24
🗿🗿🗿 @super.brodyagi
0:34
Супер Бродяги - Семейство бродяг
Рет қаралды 1,5 МЛН
РЕЗУЛЬТАТ!!!😍😍😍😱
0:20
Софья Земляная
Рет қаралды 2,2 МЛН
Taki Taki Tutorial💃 Where’re you from?🔥
0:14
Diana Belitskay
Рет қаралды 3,9 МЛН