Making a small EDC knife - Simple Little Life

  Рет қаралды 176,049

Simple Little Life

Simple Little Life

3 жыл бұрын

In this video, I'll show you the steps to make a simple EDC Knife in Stainless Steel.
You can check out the sheath video that I did for these knives here: • Making a Kydex Sheath ...
Knife Sharpening Playlist: • Knife Sharpening
Follow Simple Little Life:
Facebook: / simplelittlelife
Instagram: / simplelittlelife.ca
Follow Homestead Knives:
Facebook: / hsknives
Official Website: simplelittlelife.ca
Knife Store: homesteadknives.com
Watch More Simple Little Life:
Latest Uploads: www.youtube.com/watch?v=nwPJJ...
Popular Videos: www.youtube.com/watch?v=nwPJJ...
Knife Making: www.youtube.com/watch?v=8aXyw...
DIY: www.youtube.com/watch?v=w_2ey...
About Simple Little Life:
This channel has sort of turned (inadvertently) into a knife making channel. But the original idea behind what we wanted it to be is this description below:
Videos on our journey to homesteading. With a recent purchase of a little piece of the Alberta prairie, we're looking to sell our nice suburban home in search of a more meaningful life beyond chasing the "American dream" working for some big company and making someone else rich. It's not about the money, it's about getting the most value from the work I do to improving the life of my family.
Some preparedness, DIY, building quality things with your hands, guns, gear, and outdoor exploration.
Mailing Address:
Box 6, Site 16 RR2
Strathmore, Alberta
Canada
T1P 1K5

Пікірлер: 195
@awesomegod91
@awesomegod91 3 жыл бұрын
Jeremy, thank you for all of your great and inspiring videos. I've started making knives, something I've wanted to do for 30 years and absolutley love it! Thank you sir!
@RedBeardOps
@RedBeardOps 3 жыл бұрын
Man two in one day! It's like Christmas! I'm with you on the water dunk. I like it due to the time savings. I've read some forum posts where people smarter than me were saying there was actually a slight advantage... but sounds negligible to me. - Edit: just got to the end... great video as always sir! Loved it all.
@donny6363
@donny6363 3 жыл бұрын
I started doing it after watching your videos!! 👍🏻 never knew there might be a performance advantage! Haha
@RedBeardOps
@RedBeardOps 3 жыл бұрын
@@donny6363 "may be..." lol, I'm really not sure! It does save me some time though!
@vanceriekels7171
@vanceriekels7171 3 жыл бұрын
Love the videos!! Please post more often!
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you!
@Jimgoodwin846
@Jimgoodwin846 Жыл бұрын
This is a GREAT video. No nonsense, no music and great helpful information a wonderful art. Great explanation about the burr on the knife edge, I was curious. I create a burr on my woodworking scrapers kind of wondered if they were the same. Thanks again for sharing this very informative video.
@Simplelittlelife
@Simplelittlelife Жыл бұрын
Thank you so much! I’m glad you liked it and thanks for the kind words and for watching. Cheers👍
@sudo_nym
@sudo_nym 3 жыл бұрын
I’ve missed SLL from my KZfaq feed. Great to see you back, Jeremy. Another excellent tutorial! 🇬🇧🙏🏻🇨🇦
@robwhitehair6982
@robwhitehair6982 3 жыл бұрын
You take time to really go through the process and not only do I appreciate that , you do fantastic work. Thx
@johnjude2685
@johnjude2685 Жыл бұрын
I'm liking what I'm seeing. Thanks for helping me and others
@donny6363
@donny6363 3 жыл бұрын
I have been making for around a year and a half now, and I would definitely credit you and your videos like this with getting me started. Great to see you're still at it!
@amricke
@amricke 3 жыл бұрын
Jeremy, thank you so much for your care and consideration. I greatly enjoy and appreciate your videos. Keep up the good work. May you and your family continue to be blessed.
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much! 👍
@mikee.1230
@mikee.1230 3 жыл бұрын
Thank you for sharing your considerable knowledge.since I discovered your channel my knives have improved very much.
@Twinhemlocks
@Twinhemlocks 3 жыл бұрын
Great to see you back making videos! You have been huge in helping my learning curve!!
@larshoneytoast722
@larshoneytoast722 3 жыл бұрын
This might be one my favorite of your videos. Tons of detail and even specific questions I had were answered and as always looks and sounds phenomenal. Keep it up brother!
@erikvandam5685
@erikvandam5685 7 ай бұрын
That is one great looking knife, 🫡
@crawbag0311
@crawbag0311 3 жыл бұрын
I crunched the numbers for you. 96.734% of the work is done. Great vid as always. Ive always enjoyed the work noise sped up.
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
😆👍
@dougtroutman5695
@dougtroutman5695 2 жыл бұрын
Just getting started, this really helps a lot watching you. Thanks for the good information.
@EphemeralRage
@EphemeralRage 3 жыл бұрын
Fantastic vid sir! Thanks for taking the time to make it! God bless!
@brandonbogdanoff4135
@brandonbogdanoff4135 3 жыл бұрын
Love your content. I always learn ways to improve my knife making from your videos. Thanks for sharing your skills.
@mathewfield7671
@mathewfield7671 3 жыл бұрын
Awesome videos mate. Learning heaps and looking forward to starting my first project. Thanks for taking the time to share 👍
@ericgarner2987
@ericgarner2987 2 жыл бұрын
Great video. THANKS!!!! from NC
@Simplelittlelife
@Simplelittlelife 2 жыл бұрын
Thank you! You’re welcome and thanks for watching! 👍
@phillipimsdahl3563
@phillipimsdahl3563 3 жыл бұрын
I have never crafted my own knife but it was sure a delight to watch you work one out thanks.
@schnitzerfrancis1082
@schnitzerfrancis1082 Жыл бұрын
It's looks very cool man. Good hands on knife.
@Simplelittlelife
@Simplelittlelife Жыл бұрын
Thank you!
@DomStubbings
@DomStubbings 3 жыл бұрын
So many more intricate details when working with stainless steel that I’d never thought of, awesome video man I’ll be sure to check out some of your others!
@dmollers2010
@dmollers2010 3 жыл бұрын
Amazing video!!
@Junkmann-kp9mv
@Junkmann-kp9mv 3 жыл бұрын
Took a break at work just to watch your video. Really excited to see your making videos again. Love the step by step tutorial.
@darrenkirk6576
@darrenkirk6576 3 жыл бұрын
Another awesome build mr Jeremy... well done.. looking forward to seeing my 2.... 👍🍻😉👊
@stevelee3144
@stevelee3144 2 жыл бұрын
Thanks for sharing, I always learn a lot from you. Appreciate it.
@davetaylor8055
@davetaylor8055 3 жыл бұрын
Dude, your awesome ive never been exposed to any of this type of metal work, I've built jet aircraft but thats a whole other world. Thanks for sharing my mind is Blown.
@rayroid6656
@rayroid6656 3 жыл бұрын
I like 👍 it . Nice good job
@cliftonshotwell7847
@cliftonshotwell7847 3 жыл бұрын
Excellent job! Thank you
@coltbenning8547
@coltbenning8547 2 жыл бұрын
ive been making knife for a very long 3 to 4 months lol notice the single tense in knife, yes one knife. i am still enjoying it very much and the biggest thing ive learned is I NEED TOOLS LIKE YOU GUYS.i thank you for all the info that u pass along. ive never done any metal work past sharpening a couple of lawn mower blades on a bench grinder, so this has been a very educational road. ive learned how little i know. my first is{now complete} a bushcrafting spearpoint out of a 1923 sawmill blade about 3/16 thick. i am assuming it is a high carbon still. so i heat treated it in a wood fire in my back yard. i heated it to the point it wouldnt draw a magnet, quenced it in cooking oil i pretreated with a railroad spike. then tempered it in the oven at 400 for 2 hours let it cool down there till the next day. it seems very hard, and hard to sharpen. i put it to a test this week making feather sticks and process wood (acually batoning it throuh wood as in splitting wood.) it was dissappointing to fell the edge was not as sharp when finished as i woud have thought. any advice on how to do my next blank from this 1923 saw mill blade?
@davebowles9023
@davebowles9023 3 жыл бұрын
Thanks for all your info that you so generously put out there. It is really helpful. Greetings from South Africa
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
You’re welcome. It’s a lot of fun to share what little I’ve learned and I do appreciate you taking the time to watch 👍
@suecollins3246
@suecollins3246 2 жыл бұрын
Where in SA are you, David? I'm in Citrusdal in the Western Cape.
@drm42
@drm42 2 жыл бұрын
Awesome video, thanks for sharing your knowledge!
@patrickmessinger9476
@patrickmessinger9476 3 жыл бұрын
That is a beautiful knife you have made. So thankful that you and other talented artist are out there for me to appreciate the work that you do. Thanks so much. (:
@meandmyRC99
@meandmyRC99 Жыл бұрын
Great detail, thank you!
@whitecaps775
@whitecaps775 Жыл бұрын
Very nice and informative. Great tips to add to my limited abilities, Thank you
@nerdonthebike9713
@nerdonthebike9713 Жыл бұрын
If I interrupted my dad while he was filming even if he had just finished he would still freak out 🥲 good job and not freaking out or getting upset at him.
@WastelandForge
@WastelandForge 3 жыл бұрын
I've totally done a normalizing cycle on knives that I was gonna temper in my kiln, and I have the tap control! I'm glad to know I'm not the only one who's done it!
@MarkMarson
@MarkMarson 3 жыл бұрын
Excellent material.
@Dalan612
@Dalan612 2 жыл бұрын
Awesome content man, thanks for the tips! 🤘🏼
@johnnorton7861
@johnnorton7861 3 жыл бұрын
Great as usual.
@adrianhernandez974
@adrianhernandez974 3 жыл бұрын
Maravilloso video, muy útil. Un abrazo desde Ecatepec, México 🇲🇽
@jg393
@jg393 3 жыл бұрын
Finally!!!! Really been missing your videos!!!
@nateand3
@nateand3 3 жыл бұрын
I always enjoy your videos and love the knives you make. I think these will make great EDC knives. Now off to the sheath making
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much! 👍
@girliedog
@girliedog Жыл бұрын
Thank you this very detailed and informative video. You have superior knife making skills that produce and exquisite product.
@Simplelittlelife
@Simplelittlelife Жыл бұрын
You’re welcome and thank you so much for the kind comment. I really appreciate it. Cheers👍
@NelsonMendezJr.
@NelsonMendezJr. 3 жыл бұрын
Awesome, these are really masterpieces
@marcusadams3962
@marcusadams3962 2 жыл бұрын
OMG.... sir you are a master!!!.... wish I could afford a knife made by you!.... I find your posts highly informative, educational & a pleasure to watch.... love your work, your tuition & your methodology..... the world is a better place with you.... thank you & keep it up.... love, light & life bru.... 👍🎫🙏🕊
@wttdashb2
@wttdashb2 3 жыл бұрын
Jeremy you make it look so easy and your knives are bada$$
@TLaneyful
@TLaneyful 3 жыл бұрын
Very nice work!
@Heckler247
@Heckler247 3 жыл бұрын
Great content and awesome little knife absolutely flawless! "I want that!"
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much, I appreciate that! And thank you for watching 👍
@nmcc.2601
@nmcc.2601 3 жыл бұрын
With your stainless envelope, can you use like a paint brush roller or some kind of roller that can conform to the knife and roll the oxygen/air out of the end of the envelope before your final "sealing" crimp. Obviously not going to get all oxygen out but just a thought!! Sweet knife, great video!!
@benfernance4936
@benfernance4936 Жыл бұрын
Mate you are an amazing craftsman
@Simplelittlelife
@Simplelittlelife Жыл бұрын
Thank you! I appreciate your kind words.
@oomarky
@oomarky 3 жыл бұрын
Great video, great knives. Thanks
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you for the kind words and for watching 👍
@meandmyshadow2213
@meandmyshadow2213 3 жыл бұрын
You are back! Exelent🤟
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Hahaha, yeah! Thank you 🙏👍
@spencerbass7142
@spencerbass7142 3 жыл бұрын
Wow, so nice.
@TooTall553
@TooTall553 3 жыл бұрын
Where's tool time Tuesday, great to see you back be safe
@juliodavidguerra
@juliodavidguerra Жыл бұрын
Excelentes piezas felicidades
@toddross4698
@toddross4698 3 жыл бұрын
Really like this design man great work
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you!
@janbok4131
@janbok4131 3 жыл бұрын
awesome video,very informative,beautiful knives
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much!
@Yousoundvaxxed
@Yousoundvaxxed 3 жыл бұрын
Been waiting on your videos!
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you for watching them! I do appreciate it 👍
@Yousoundvaxxed
@Yousoundvaxxed 3 жыл бұрын
@@Simplelittlelife my pleasure, my cousins trying to get into knife making as well so I made him binge watch your vids haha
@RB-fn5om
@RB-fn5om 3 жыл бұрын
I really like your videos. They are very helpful to me as a beginner. Thanks a lot for that !
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much! That’s great to hear. I really appreciate you watching them👍
@RB-fn5om
@RB-fn5om 3 жыл бұрын
So the learning can go on. Thank you so much. I look forward to more of your great videos !!!
@briman1234ify
@briman1234ify 3 жыл бұрын
Beautiful work! The blade looks thicker than 1/8, more like 3/16 - nice and beefy.
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thanks. It is 1/8”. Online video doesn’t always look like reality 😆👍
@potatotr33
@potatotr33 3 жыл бұрын
Great detail and really good video production on this one! Wonderful knives as always.
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much! I appreciate that and you watching 👍
@NuManXplore
@NuManXplore 3 жыл бұрын
Great video and knife my friend! I think that is very similar to the model of your knives that I have except blade may be slightly narrower - I love it, btw!
@norby0418
@norby0418 3 жыл бұрын
Beautiful knife much nicer than my edc Izula!
@jezzgates67
@jezzgates67 Жыл бұрын
Very nice knives sir👍
@Simplelittlelife
@Simplelittlelife Жыл бұрын
Thanks 👍
@marciosantinelli
@marciosantinelli 3 жыл бұрын
Very Very Good !!! TOP , SHOW BRASIL
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you!
@sikamoreify
@sikamoreify 3 жыл бұрын
Nice tip with the black rouge on the polishing wheel! Definitely a bummer when you have to keep going back and forth between the finishing polish and hand sanding some of those places I missed.
@dragonwaterforge
@dragonwaterforge 3 жыл бұрын
Awsome again
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much!
@gtaitor
@gtaitor 3 жыл бұрын
I would love to buy one of these knives. That's my dream edc shape and size.
@m53knives8
@m53knives8 3 жыл бұрын
nice nice.. like surely
@a3iaanautlaw161
@a3iaanautlaw161 2 жыл бұрын
extremely beautyfull!
@nvdwalt
@nvdwalt 3 жыл бұрын
Amazing bud
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Thank you so much!
@SLAVIKTELY
@SLAVIKTELY 3 жыл бұрын
0:32 I do agree with that. CPM 154 eats blades for breakfast, lunch, dinner and snacks in between. After I start cutting it I always tell myself why did I buy it again?
@brodylockley3141
@brodylockley3141 3 жыл бұрын
@Edgar Taillon that fucking weird why would you whant to do that
@nils-ph3zs
@nils-ph3zs 3 жыл бұрын
@@brodylockley3141 he is just a bot
@ZyloXDT
@ZyloXDT 3 жыл бұрын
Wow 31k views and only 14 dislikes!? Good work sir!!!
@trulsdirio
@trulsdirio 3 жыл бұрын
Wich grit Trizact belt did you use for this knife? Great video and good to have you back in making such great detailed and awesome videos, I am just starting out and have heard 90% of what you say in many other videos, but you always have some new and great tips and techniques in there. Really entertaining and helpful! THanks a lot for that!
@mattariety955
@mattariety955 3 жыл бұрын
Man this is so awesome, really glad i found your channel! i am also from Alberta Canada and am looking to try my hand at knife making.
@Simplelittlelife
@Simplelittlelife 3 жыл бұрын
Right on! Thank you so much for watching and I hope your knifemaking goes really well 👍
@mattariety955
@mattariety955 3 жыл бұрын
@@Simplelittlelife thank you , are you still taking orders ? i was on your website i didnt see any current blades for sale.
@albertosbrolla8424
@albertosbrolla8424 3 жыл бұрын
Very nice, love your work and incredible craftsmanship!👍🏻
@CanadianCuttingEdge
@CanadianCuttingEdge 3 жыл бұрын
I have seen your old video from 2016 about etching logo etc, on steel, that was a complex system, do you have a video where you explain the details of the system you are using in this video. I want to do some AC/DC etching and would like to know your whole process, from how to get the vinyl set up to the very end. THANKS
@max88nielsen
@max88nielsen 3 жыл бұрын
Pro at work. And very good teaching!! Thanks. Did you do anything to get the texture finish near the spine of the very beautiful knive. Regards from Denmark
@vasileiuga7299
@vasileiuga7299 3 жыл бұрын
nice blades
@aaronsimms3523
@aaronsimms3523 2 жыл бұрын
I really love these blades. What is the over all length of them? they look like 3 finger knifes.
@wadesaunders583
@wadesaunders583 11 ай бұрын
continued awesome work. nice tips. jealous of that solid steel jig setup. can I ask how they are made?
@Simplelittlelife
@Simplelittlelife 11 ай бұрын
Thank you! I machined them out of solid blocks of steel on my milling machine.
@davidparker3346
@davidparker3346 3 жыл бұрын
Great looking blade. Your flats on the blade appear stippled. How was it done , I like the way it looks.
@KnifehandCustoms
@KnifehandCustoms 2 жыл бұрын
Good morning, sir. Thanks for the videos they have been extremely helpful. I have the same issue with my DIY jig. My knives are coming out with the bevels much lower than I'd like. How do we achieve a higher bevel with a jig? Is it due to a difference in angle? Did the second jig have a lesser angle so the belts bite further up the spine? I finally have a 2x72 Arriving today. I would like to improve what I have been producing and this specific issue is one of the "things that gets me"
@shawngee5481
@shawngee5481 3 жыл бұрын
Nice job Jeremey!!! Nice pair of knives!!! I have been gone for a while too, nice to see you back. Hows that spring in your knife holding up?
@dancox5572
@dancox5572 3 жыл бұрын
Hey I'm sponging up your knowledge. I thoroughly enjoy your work. I understand you are from Alberta and was wondering if we could talk about sourcing. I am an internet dum dum I'm 45km south of Edmonton .thank's very much.
@Mbonner73
@Mbonner73 2 жыл бұрын
Can you do a video on building different jigs to get your bevel?
@ruditaler6130
@ruditaler6130 3 жыл бұрын
21:42 😆 How well i do know that issues! Though is there any reason why you don't stamp your sign into the knife befor hardening?
@tthomp57
@tthomp57 2 жыл бұрын
I really like your videos with the narration. Thanks for putting this out there. BTW, what do you charge for a little EDC knife?
@jeremyguterres
@jeremyguterres 6 күн бұрын
@ldreactz7410
@ldreactz7410 3 жыл бұрын
Can you do another build along please I’m trying to make my first build
@kellzlefontae1510
@kellzlefontae1510 3 жыл бұрын
Beautiful. Great knives and skills. How do I order?
@dcarmon80dc
@dcarmon80dc 3 жыл бұрын
Hello Jeremy I would like to know what you would charge for 1 of those knives. I hunt and would like something to pass down to my daughters. You do such a good job 👏 I was just wondering.
@ryanbingaman8229
@ryanbingaman8229 3 жыл бұрын
Just curious as to why you picked 154cm vs. AEBL or Nitro-V? Just wondering for my own knowledge! Thanks and keep up the great work sir!
@bertalafacousl4384
@bertalafacousl4384 2 жыл бұрын
New subscriber.. im really intrested in owning a TSPROF. Where did you get your attachment to hold a single blade directly in the center in video?
@bilylow93
@bilylow93 3 жыл бұрын
Brautiful
@miguelpimentel8539
@miguelpimentel8539 10 ай бұрын
The scallops seam to look as if their there for extra grip I like those knives
@miguelpimentel8539
@miguelpimentel8539 10 ай бұрын
I actually like all you projects you show us
@Simplelittlelife
@Simplelittlelife 10 ай бұрын
Thank you so much!
@SwitchbackXThunter
@SwitchbackXThunter 3 жыл бұрын
Hey Jeremy, what degree is that 2nd beveling jig set at and what thickness material? How much does the thickness of the material change the bevel height with the same jig when grinding the primary bevel to the target thickness?
@garetkonigsfeld2
@garetkonigsfeld2 3 жыл бұрын
Is there a reason why you don't do a preheat at 1600. And then ramp to 1950. Thanks for the videos its always good to see how others work. There's always something new to learn.
@4runner1grfe
@4runner1grfe 3 жыл бұрын
Great explanations. How come you grind the knife AFTER hardening the steel? Doesn’t that make the knife significantly more difficult to grind and also wear out your sanding belts faster? Why not grind a bit before heat treating ? obviously not too thin as it’ll warp the knife during quenching
Making a knife with a 1 X 30 belt sander?
20:40
Simple Little Life
Рет қаралды 345 М.
Making a Knife From a Circular Saw Blade
39:13
The Art of Craftsmanship
Рет қаралды 1,4 МЛН
Получилось у Вики?😂 #хабибка
00:14
ХАБИБ
Рет қаралды 6 МЛН
Survival skills: A great idea with duct tape #survival #lifehacks #camping
00:27
🌊Насколько Глубокий Океан ? #shorts
00:42
Always be more smart #shorts
00:32
Jin and Hattie
Рет қаралды 41 МЛН
How to Make a Knife - The Crooked Finger
22:50
Simple Little Life
Рет қаралды 206 М.
Thick EDC Knife - Knifemaking
15:23
Red Beard Ops
Рет қаралды 99 М.
How to make a knife - a bushcraft knife
16:07
Simple Little Life
Рет қаралды 645 М.
Making a Knife in 2 hours, 7 minutes
12:06
Simple Little Life
Рет қаралды 388 М.
Making A Knife With CHEAP Harbor Freight Tools | Knife Making Basics
19:29
Make a knife sheath Zero to Hero
53:24
Aleeknives
Рет қаралды 219 М.
How to make a knife with common hand tools - Part 3
18:13
Simple Little Life
Рет қаралды 724 М.
Making a Every Day Carry "EDC" Knife
31:29
Zeeman Knives
Рет қаралды 91 М.
Simplest Knife Build Ever! - YOU Can Make It.
17:31
Walter Sorrells
Рет қаралды 10 М.
Shaping Woodlander Knife Handles
15:10
Ben & Lois Orford
Рет қаралды 21 М.
Гений своего дела🔥
0:16
FERMACHI
Рет қаралды 7 МЛН
Random pink food asmr mukbang 📱 #asmr #mukbang #eating #food
0:14
VOCÊ ME AJUDARIA ?
0:46
JHONIC
Рет қаралды 25 МЛН
Турист раскрыл тайну нарисованной Италии
0:15
Короче, новости
Рет қаралды 2 МЛН
Моя супер находка для велосипеда #находки #wildberries #топ
0:14