How To Make a Knife - paring knife in s35vn
Рет қаралды 86,148
4 жыл бұрынHere is a full build video on making a small paring knife. I decided to do a vlog style video with this one and I hope you enjoy it. #knifemaking #chef #kitchenknife
Knife is available here: homesteadknives.com/products/...
Subscribe to Simple Little Life: kzfaq.info/love/USz...
Watch More Simple Little Life: kzfaq.info/love/USz...
Follow Simple Little Life:
Facebook: / simplelittlelife
Instagram: / simplelittlelife.ca
Follow Homestead Knives:
Facebook: / hsknives
Official Website: simplelittlelife.ca
Knife Store: homesteadknives.com
Watch More Simple Little Life:
Latest Uploads: www.youtube.com/watch?v=nwPJJ...
Popular Videos: www.youtube.com/watch?v=nwPJJ...
Knife Making: www.youtube.com/watch?v=8aXyw...
DIY: www.youtube.com/watch?v=w_2ey...
About Simple Little Life:
This channel has sort of turned (inadvertently) into a knife making channel. But the original idea behind what we wanted it to be is this description below:
Videos on our journey to homesteading. With a recent purchase of a little piece of the Alberta prairie, we're looking to sell our nice suburban home in search of a more meaningful life beyond chasing the "American dream" working for some big company and making someone else rich. It's not about the money, it's about getting the most value from the work I do to improving the life of my family.
Some preparedness, DIY, building quality things with your hands, guns, gear, and outdoor exploration.
Mailing Address:
Box 6, Site 16 RR2
Strathmore, Alberta
Canada
T1P 1K5
@JonnyBuilds 4 жыл бұрын
Your on-cam explanations are fantastic! Learning a lot watching your channel. Thanks!
@Simplelittlelife 4 жыл бұрын
Thank you so much! I enjoy your videos too. Cheers 👍
@stanislavstrecker7476 4 жыл бұрын
Scrolling through the comments, looking for questions i have. I really noticed that you almost answer every one of them. Really appreciate that in videos.
@Simplelittlelife 4 жыл бұрын
Right on, thank you! 👍
@mikeds750 4 жыл бұрын
The epoxy probably set in the grooves when you were bedding the tang. I use paste wax when i do it then add grooves in my tang just before final glue up to help the epoxy hold the knife.
@wngimageanddesign9546 3 жыл бұрын
Shape is a traditional Japanese paring knife. Wonderful craftsmanship.
@Simplelittlelife 3 жыл бұрын
Thank you so much! 👍
@raymondclark1458 4 жыл бұрын
Loving these videos. You have the heart of a teacher. Lovely little knife. Thank you!
@johnviewer2305 4 жыл бұрын
Jeremy love these start to finish builds...and a awesome build to boot...thx...
@Simplelittlelife 4 жыл бұрын
Thank you very much! 👍
@reidguhr5313 4 жыл бұрын
Small knives this size will always have a place in my heart. Awesome knife and video.
@Simplelittlelife 4 жыл бұрын
Thank you!
@walkerhussey2987 4 жыл бұрын
Hey just a little tip that has helped me get the handle of a beded tang would be to but the groves in that tang there after you bed it so the epoxy doubt catch. ;)
@kaskristensen 4 жыл бұрын
Nice With a good long knife build video! Thanks J!
@the_sharp_carpenter 4 жыл бұрын
Wax won't override a mechanical lock. Glad you got it out.
@tuckerabbott 4 жыл бұрын
There wasnt a mechanical lock though there wasnt a pin
@the_sharp_carpenter 4 жыл бұрын
@@tuckerabbott there were notches cut in the tang, which would create a mechanical lock with the epoxy, that's the point of the notches.
@shawngivens247 4 жыл бұрын
Thanks for the added bit of instruction during your bevel grind. As someone who is just starting freehand bevels, that was very helpful!
@Simplelittlelife 4 жыл бұрын
Right on! You’re welcome 👍
@donhalligan7279 4 жыл бұрын
Wow, I've watched your videos for years now and they just keep getting better and better. Thank you for what you do Jeremy this is so helpful and interesting!
@Simplelittlelife 4 жыл бұрын
Thank you very much, I appreciate that! 👍
@joecoastie99 4 жыл бұрын
Excellent job on the knife and video
@Simplelittlelife 4 жыл бұрын
Thank you!
@ed.sol.crafts 4 жыл бұрын
Awesomejob! Love that petty/paring knife!
@Simplelittlelife 4 жыл бұрын
Thank you!
@TxStang 4 жыл бұрын
Great looking knife , the color combo on the handle is spot on .
@bowtechlover1 4 жыл бұрын
Another amazing build!!! Great job!!! Thank you for this!! 💪🏿🎯❤️
@Simplelittlelife 4 жыл бұрын
You’re welcome! And thank you for the great feedback. 🙏👍
@SuperJaXXas 4 жыл бұрын
Just discovered your channel. As a knifemaker wannabe I'm seeing so many tips, tricks and methods that answer many of my questions. Even those I didn't know I had. Thanks for all your efforts!
@oneshotpete6.591 4 жыл бұрын
Absolutely awesome 👏 as always, beautiful work !!!
@eoinkirwan1635 3 жыл бұрын
Such a precise craftsman, a joy to watch!
@Simplelittlelife 3 жыл бұрын
Thank you so much. I appreciate that! 👍
@dom8420 4 жыл бұрын
Finally another knife build🤘🤘
@Simplelittlelife 4 жыл бұрын
Yeah!! 👍
@Stillpoint23 3 жыл бұрын
So many hidden gem tips in this video, one I picked up on is where you mark up the handle, I saw few tricks in that process that will go into my tool chest of methods. Thanks again :)
@e.t.preppin7084 4 жыл бұрын
I just love this lil kitchen knife. I’ve probably said that several times already in other posts. Forgive me I’m really just trying to learn. 👍👍👍
@kenglass1980 4 жыл бұрын
Love it!!!!! That handle technique looks fab. Must try it. Cheers
@Simplelittlelife 4 жыл бұрын
Right on. I’ve found it to be really useful. Cheers👍
@PopleBackyardFarm 4 жыл бұрын
This was pretty cool. New friend
@peterc938 4 жыл бұрын
Awesome as always
@Simplelittlelife 4 жыл бұрын
Thank you so much 👍
@tracybrickey2686 4 жыл бұрын
The wax process will work a lot better if you don’t bitch the sides of the tang until just before final glue up. Leave the tang smooth during the 1st glue up with paste wax and it will slide right out for ya. Love your videos and I’ve learned so much from them. Keep up the great work Brother!!
@mramanya 4 жыл бұрын
Another beautiful knife....
@Simplelittlelife 4 жыл бұрын
Thank you!
@Edwards7084 7 ай бұрын
I really like this knife, good job 👍
@18deadmonkeys 3 жыл бұрын
dude, that is gorgeous and the handle construction method is absolutely brilliant!
@Simplelittlelife 3 жыл бұрын
Thank you!
@J0Gu7 4 жыл бұрын
That is an amazing knife!
@Simplelittlelife 4 жыл бұрын
Thank you!
@shiranistraker7572 4 жыл бұрын
very helpful, thank you!!!!!
@Simplelittlelife 4 жыл бұрын
Right on! Glad it helped and thanks for watching!
@cutenose38 4 жыл бұрын
Another beautiful knife i wouldn't mind that for peeling my vegies
@J0Gu7 4 жыл бұрын
So you have been my inspiration to do some knives. I have built a belt grinder and was racking my head over the belt oscillating a bit side to side, but I see yours does too. I have yet to start even figuring what knife i wanted to start with. I think it will be a paring knife. Thanks for sharing your work and passion. Hope to be able to send you a a picture of a knife soon.
@Simplelittlelife 4 жыл бұрын
Right on. I find it depends on the belts. Some belts run perfectly true. Some wobble. 👍
@natek1993 4 жыл бұрын
Incredible work.
@Simplelittlelife 4 жыл бұрын
Thank you very much.
@Augcliffe 4 жыл бұрын
Another great video! I loved the music editing
@Simplelittlelife 4 жыл бұрын
Thank you so much! I appreciate the feedback. Cheers👍
@andyliu3148 4 жыл бұрын
Perfect 💯
@Simplelittlelife 4 жыл бұрын
🙏👍
@maxrv8274 4 жыл бұрын
I also make knives through blacksmithing but also decided to use stick removal for some types of knives. Your videos were my inspiration. Great work, great videos, and love the knives you make!
@user-tn5ko7jp6u Жыл бұрын
11111¹
@user-wr6wo6vr8r 4 жыл бұрын
that is a sweet knife
@TrojanHorse1959 4 жыл бұрын
Very nice it's beautimous!
@Simplelittlelife 4 жыл бұрын
Thank you!
@jmiles25 4 жыл бұрын
Awesome, like always
@Simplelittlelife 4 жыл бұрын
Thank you!!
@TheTryHardDad 4 жыл бұрын
Love the step by step commentary
@Simplelittlelife 4 жыл бұрын
Thanks 👍
@RedBeardOps 4 жыл бұрын
Absolutely excellent sir! These videos are helping me build my first kitchen knife!
@Simplelittlelife 4 жыл бұрын
Thank you! I’m glad that these are helping you out 👍
@simonhopkins3867 4 жыл бұрын
Cool little knife bud
@Simplelittlelife 4 жыл бұрын
Thank you!
@sudo_nym 4 жыл бұрын
Jeremy, man - that’s sweet!
@Simplelittlelife 4 жыл бұрын
Thank you!
@BrianBusser 4 жыл бұрын
Beautiful knife, keep it up.
@Simplelittlelife 4 жыл бұрын
Thank you!
@MNgunhead 4 жыл бұрын
good looking knife. I just made my first wa handled knife with some advice I took from you. it turned out nice. thanks for sharing your knowledge. p.s. I use one of your sanding blocks too. I love that thing. worth every penny
@Simplelittlelife 4 жыл бұрын
Thank you very much, I appreciate that! Yeah it’s a slick way to do it and took all the hassle out of wa handle for me when I learned about it. Thank you for buying a sanding block too! I appreciate the support 🙏👍
@baer1204 4 жыл бұрын
top kife 😎😎👍👍
@chriswenkle2635 4 жыл бұрын
Great little knife! Not quite as cold here in north Idaho (Rathdrum), but we're getting there. They're predicting heavy snow for us this winter, but what we expect is probably is probably a light dusting for you (130+ inches(.
@albertosbrolla8424 4 жыл бұрын
Nice knife, love watching your videos!👍
@Simplelittlelife 4 жыл бұрын
Thank you so much!
@Peixos. 4 жыл бұрын
Looks great dude! Good job!
@Simplelittlelife 4 жыл бұрын
Thank you!
@MrMarsBlades 4 жыл бұрын
Awesome, thanks mate
@Simplelittlelife 4 жыл бұрын
Thank you! 👍
@e.t.preppin7084 4 жыл бұрын
I’ve started considering what size small wheels I have to consider my design of my knives. Large wheels too. Just makes it easier when I have a tool for a specific radius.
@EphemeralRage 4 жыл бұрын
Super nice knife and superb video!
@Simplelittlelife 4 жыл бұрын
Thank you so much! I appreciate that 🙏👍
@eddie5211 4 жыл бұрын
Enjoyed that thanks Jeremy. Respect the poppy.
@Simplelittlelife 4 жыл бұрын
Thank you. On both accounts. My boys are placing poppies tomorrow during a Remembrance Day ceremony. It’s really important to our family. 👍
@jackspradt1562 4 жыл бұрын
@@Simplelittlelife it's a shame what they did to Don Cherry. I live in LA - big Kings fan and I've loved and cherished Don since the early 80's. just a shame. take care.
@jmsmith1767 4 жыл бұрын
I’d purchase this knife or this style right away. It’s a paring knife BUT a little bigger. Great video great knife
@tuckerabbott 4 жыл бұрын
Its for sale on his website in the describtion
@jmsmith1767 4 жыл бұрын
tucker abbott yup thanks I commented :30 seconds before he said it was going to be listed
@brazkie 4 жыл бұрын
That is a b.e.a.u.t.i.f.u.l knife
@Simplelittlelife 4 жыл бұрын
Thank you very much!
@cheezez1904 4 жыл бұрын
dude you are my favorite knife maker for a few reasons, one: both your knives and content are amazing and inspiring and 2: YOUR FROM CANADA and better yet, your from Alberta which is so cool bc i live relatively close to you keep up the great work my dude (and p.s i made a little knife "company" with my buddy and i feel like i may be undercharging for them, so is there any way i can send you one of my knives for you to see because i want to get an honest opinion from a more experienced knife maker, as ive been making knives for about 2 going onto 3 years now, thx)
@richardbohlingsr3490 4 жыл бұрын
Super nice knife. It should be great in the kitchen. I like that you made the handle big enough for a man's hand. Even in a woman's hand it gives better control.
@robertkoontz7865 4 жыл бұрын
I bought some wood scraps for handle with than same grain structure, I took a pic ran it through Google Pics that identifies plants, so cool. It says American Walnut, not sure, I got some cocobola but yeah I think its Walnut, Nice work, heat treat and cryo is a bonus.
@Simplelittlelife 4 жыл бұрын
Thank you! It’s some weird name. I know I will recognize it as soon as I see it but it’s driving me nuts. I have cocobolo and walnut in the shop and when they’re side by side there’s a distinct difference in the grain. I appreciate your input though! When I do find out what it is i’m going to make a little community post about it 👍
@user-hl7hn8ye7s 4 жыл бұрын
good job👍👍👍👍👍
@Simplelittlelife 4 жыл бұрын
Thank you .
@biglumpy12 4 жыл бұрын
I made knives that looked very much like a few years ago for Christmas presents.
@Simplelittlelife 4 жыл бұрын
Right on.
@jamesm3268 4 жыл бұрын
Use Vaseline for the tang and only a very light thin coating not wax leave in for 5 mins only or less once it's aligned clean off the Vaseline and reinsert 10 mins or so later and you will be fine. lastly holes through the tang provide a better means of mechanical retention compared to rounded outside curves. Sweet work Regards fifty50 knives.
@dennisfischer9930 4 жыл бұрын
Glad to see you repine' the poppy!
@Simplelittlelife 4 жыл бұрын
Thank you. My boys had 2 shifts each selling poppies with the Air Cadets this remembrance season. Going to a ceremony tomorrow. I’m proud to say we take it fairly seriously in our house. I could never be grateful enough for the sacrifices made. 👍
@dennisfischer9930 4 жыл бұрын
@@Simplelittlelife Yes, we must always remember. My dad - Navy South Pacific and my father-in-law - Battle of the Bulge.
@supermannyg3 2 жыл бұрын
The notches cut into the tang definitely fought against the wax.
@Onlyone3498 4 жыл бұрын
First viewer nice video by the way
@Simplelittlelife 4 жыл бұрын
Thank you!
@danheitman2527 4 жыл бұрын
Love your videos, not certain but that wood looks like padauk.
@vandelftcrafts2958 4 жыл бұрын
Wax only works realy well if the tang is more or less smooth, the grooves/notches in your tang make nice pockets for the epoxy to harden in and make it hard or impossible to take out without any damage to the handle. One way would be to make the grooves/notches after you glued the Handle. Or... you could just do it like you have always done it, seemed to work just fine for you. Loved this vid!
@triune_blades 4 жыл бұрын
I'm working on my first hidden tang knife. It's a kiritsuke. I'm going to be using your method of fitting the handle. I've had 2 failed attempts already and watching your video REALLY helped me see things differently. When it's done, I'd like to show it to you, but I'm not sure how. How would that work? I just wanted to show how much your videos really do assist novices like myself. Thanks again!
@Simplelittlelife 4 жыл бұрын
Thank you so much! Shoot me an email at viewersknives at gmail dot com 👍
@bryanjase6930 4 жыл бұрын
You should do a whole set of Kitchen knives like this
@Simplelittlelife 4 жыл бұрын
That would be awesome! I have a potential client who wants a set of 17 matching knives (kitchen and steak). If they say yes I will most likely do a big ole video about it. 👍
@bryanjase6930 4 жыл бұрын
@@Simplelittlelife awesome hope it happens I'll be watching for all that
@vikmoj2426 4 жыл бұрын
About the radius at 3:25: It actually IS a thing! There are two different problems you have to face, static stress and fatigue stress. It's relatively easy to prevent the first one (you can't bend the steel bar with your bare hand), but if there is a sharp angle, that's the place where material is stressed the most and where will eventually a fatigue fracture iniciate. Any kind of radius can relax this at least a little bit. This should be definitely your concern if your knife is made of thin steel. If you overdo the radius (kinda enter the bar), trust me or not, it's even safer in terms of fatigue (of course this will worsen the static toughness). Fatigue fracture can be seen with cheap kitchen knife, where they spare money on every part that isn't visible. Radius designed for preventing a fatigue is a thing in shaft design and some are ostensibly weakening the part, but in the end, fatigue is what really matters. Summarized, it's even safer to make a hole in the corner with a drill than keeping a sharp angle. Anyway sorry for my english
@triune_blades 4 жыл бұрын
What angles were your primary and secondary bevels? I'm working on my first hidden tang kirisuke. Also, I like your method of fitting the handle sections together. I've been fighting that for a long time now. Even when I roughed up the mating surfaces before applying the epoxy, they would come apart during even gentle handling. 😟 The knife turned beautiful by the way.
@ianmoz7313 4 жыл бұрын
That's a slick little knife Jeremy! You used the needle scaler to make the dimples on the flats right? I missed it if you said you did in the video somewhere. Great work as always!
@Simplelittlelife 4 жыл бұрын
Thank you. That’s actually the mill scale finish that comes on the steel. Handy 👍
@e.t.preppin7084 4 жыл бұрын
Jeremy, please would you tell me how you got your epoxy in that 1/16” slot for final glue up. Thanks
@user-xf4es7eh9y 5 ай бұрын
nice work on this little knife. I am not a fan of the recurve on the heel, I've seen some from takefu that have that also and I always get rid of it. really serves no function and you just wind up nicking yourself on it. for larger knives I really like the fujiwara style notch. anyhow, this was a nice little build. great work.
@griffithshandmade-knives 4 жыл бұрын
Excellent video, and great little knife. Glad to see Jeremy you are still president of the Canadian Chapter of the Right Angle Grinder Community 👍👊👌😂🤣
@muledeerdude 4 жыл бұрын
I’m fairly certain the wood at 14:01 is teak, in case anyone was curious. Nice knife!
@Simplelittlelife 4 жыл бұрын
That wasn’t the name that was on there. Unless teak has sub-species with different names? But thanks for the input 👍
@muledeerdude 4 жыл бұрын
Simple Little Life there are a few subspecies but as far as I know they have the word teak in part of the name. Do Iroko or black locust sound right?
@007Jaredboy 4 жыл бұрын
Nice build. Maybe Im cheap, but I probably would have split the steel in half lengthwise and made two of those blades, making it slightly narrower if needs be :P
@Spectt84 4 жыл бұрын
What would happen if you took the red hot pouch out of the oven, and put it straight into the cryo treatment? Extreme warpage? Extreme brittleness? Extreme hardness? or just shatter?... I'd like to see that experiment and the resulting hardness. Nice job & nice video work.
@Simplelittlelife 4 жыл бұрын
I have no idea. Probably just boil all the LQ without much effect. That little dewar is. $140 fill for me so I don’t think I’ll be trying that anytime soon 😆. But that would be really cool to see....🤔👍
@jakemotley6071 4 жыл бұрын
Nice knife. I think the reason the tang wouldn’t come out of the handle easily is because you put the grooves for the epoxy in the tang. Maybe try making those grooves after bedding the tang. Great video thanks
@Simplelittlelife 4 жыл бұрын
Thanks! I moved the blade up and down for that reason and thought it would help. These are just two of several ways to get it done and I think it’s always best to stick with your personal preference. That’s the last time I try waxing it 😆👍
@jakemotley6071 4 жыл бұрын
Ok have a good one
@jacknemo8021 4 жыл бұрын
Yep, wax works a treat with straight or tapered tangs. but the divots leave a place for the resin to form protrusions that you have to drag past to withdraw it.
@Loan--Wolf 4 жыл бұрын
3:20 watch forged in fire i lost count how many fails from hard corners
@Simplelittlelife 4 жыл бұрын
OH I see. I know even when turning a part on a lathe if you can leave a radius instead of a hard 90 you significantly increase the strength of the part 👍
@007Jaredboy 4 жыл бұрын
Yes if you're smashing the blade into metal canisters and pig carcasses; this is a simple paring knife to cut tomatoes. I doubt it would break but regardless it doesn't hurt to round the corners...
@jamesbarisitz4794 4 жыл бұрын
That tip for air escape on the dowel is epic. That's a Liliputian Chef Knife not a paring. I'm making one this weekend in 440c and maple burl. That looks like a great take on different way to a mini - petty? 👍
@Simplelittlelife 4 жыл бұрын
Thanks! Hahaha, I want to make a paring but drew this and liked what I saw and figured maybe the next one will be a paring 😆👍
@Kolvert 4 жыл бұрын
Stress fractures at the ricasso, due to non-rounded edges, are a thing seen it happen a bunch of times on Forged in Fire (even after the competitors beeing warned in the first round. So not just a theory. You did great by playing it safe. Very nice knife, btw.
@Simplelittlelife 4 жыл бұрын
Thanks you! I don’t watch a lot of FIF though I enjoy it when in do. I remember in grade school anytime we were turning a part down in a lathe they wouldn’t have us radius any internal 90 degree cuts. We had to calculate the numbers once with engineering manuals and it’s incredible how much stronger that little radius makes a part👍
@Kolvert 4 жыл бұрын
@@Simplelittlelife same goes when designing electronic circuits, no 90 degree angles in the tracks.
@Simplelittlelife 4 жыл бұрын
Ah, that’s interesting. Makes sense but never tough how far it would cross over into other fields and disciplines.
@Kolvert 4 жыл бұрын
@@Simplelittlelife BTW I just remembered that stress fractures are also avoided by any kind of gas, propane, butane, etc. manufacturers, that's why the containers are round (even though they are less space-efficient). In order to minimize leaks and ruptures, due to internal pressure or mishandling, they avoid edges.
@FearNoSteel 4 жыл бұрын
Nice, what hardness did ya get on that one?
@Petergabriel555 4 жыл бұрын
Hi Mate, I don't know if you're still checking comments on old videos. The wood is Afrormosia. Excellent work by the way!
@Simplelittlelife 4 жыл бұрын
Oh yes!!! That is exactly it!! Thank you so much! Just last week I was working with it and wondering still what it was. As soon as I saw the word I remembered that was what was written on the side of the block. Thank you so much for taking the time. I really do appreciate it. I'm going to screenshot this and write it down. Thanks again!🙏👍
@bobothewood9628 4 жыл бұрын
I don't think the wax can work when you have groves for the epoxy to form around. Just a guess but I'm just a armchair expert here :)
@Simplelittlelife 4 жыл бұрын
I agree with you. Always like to have those groves and for me I’d rather not grind those in when the knife is 90% finished. I just got so many comments about it like they were preaching a gospel message to me. More than 1 way to skin a cat and I should just stay with the way I like to do it 😆👍
@bobothewood9628 4 жыл бұрын
@@Simplelittlelife From all that I've watched you do, the groves make sense to me :)
@p1choco 4 жыл бұрын
@@bobothewood9628 Grooves will work, but they make pulling out the blade too difficult. On a final glue-up, the grooves offer excellent mechanic advantage locking the tang into place.
@eoinmm 3 жыл бұрын
Really love your videos! What sort of math do you do to balance the blade to the handle? Or is it mostly by feel?
@aserta Жыл бұрын
3:17 not in theory, in practice. I've fixed knives for a friend who can't weld. Nobody in the manufacturing department (of the quite expensive knives, i might add) bothered to do something as simple and as effective as you're doing, so the result was broken handles on otherwise perfectly good knives. But hey, i learnt to weld stick stainless under water and he got good knives back with the proper radius in the handle, so i suppose win, win.
@mattwyeth3156 4 жыл бұрын
Nice little knife question what would happen if you put the blade into the oven before you have turned the oven on and left it there while it came up to temperature then quench it
@danielobrien5343 4 жыл бұрын
Hey, I am a beginner knife maker and I have been watching your videos for a while... I am looking to get a legit belt grinder that will be more effective for shaping and beveling my knives. However, I do not have the space, and can't afford a large 2 x 72 belt grinder. So, I was wondering if you or anybody else had any suggestions as to what would be an effective yet affordable grinder that I could purchase. Thanks! Ps.: I have been inspired a lot by your content, and I am really grateful for that. Love your videos, keep up the great work!
@Lee-NN7X 4 жыл бұрын
I'd buy that....
@Robinhoel75 4 жыл бұрын
Looks awesome. Maybe make some for sales...?
@Simplelittlelife 4 жыл бұрын
Thank you. Yeah I plan on doing that 👍
@flyphishr 4 жыл бұрын
Dang you already got snow?!? I’m sorry, it was in the 60’s here in UT...need some big burly camp knives....
@Simplelittlelife 4 жыл бұрын
Snow again here too. This weekend Alberta is expected to have the coldest temps on the planet for the weekend. Horray for us 😆👍
@andrewmapes2050 4 жыл бұрын
Very amazing! How did you get that texture on the blade? Thanks!
@Simplelittlelife 4 жыл бұрын
That’s the mill scale finish the steel came with. Love that about it 👍
@TSGEnt 4 жыл бұрын
I like baby powder because it keeps me from chafing! ;) Beautiful knife and crazy sharp! Btw, I love very thinly sliced tomatoes! Thanks again. I always learn something from you. What to do as well what not to do, like use paste wax when epoxying up a handle. ;) I've been playing with making knives with scrap metal around the house but I'd like to get my hands on some clean 1095 or even play with s35vn or s30v. Do you have a recommendation for what "real" steel to make a "real" blade from and where to get it?
@Simplelittlelife 4 жыл бұрын
Thank you! I would get it anywhere you can buy that stuff online but all depends on where you live. I always like O-1 tool steel.
@TSGEnt 4 жыл бұрын
@@Simplelittlelife Thanks for the tip! I'm in Central Texas.
@TSGEnt 4 жыл бұрын
@@othername1000 Thanks for your suggestions. I'll give them a look
@ajmckay2 3 жыл бұрын
22:00 - I'm thinking the reason it was so hard to get out is because the grooves were catching on the epoxy. I wonder if you could put those in after the initial epoxy?
@TobyFireandSteel 4 жыл бұрын
Hi Jeremy love the video as usual bud great work. What camera and lense do you use mate? And coincidentally this paring build falls on the same week as our first tfs knife maker challenge on Facebook. Theres been some conversation on the group about your build as we are all building a similar parer in there. We'd love it if you wanna come over and say hi. Apologies for hijacking your comments thread it's not my intention. We love your channel
@diego6strings 4 жыл бұрын
is it possible to buy knives from you? order custom or such? I love everything u make. so beautiful ...
@rroberts8501 4 жыл бұрын
Just subscribed to your channel and was looking for a follow up to your inexpensive anvil purchase from a couple years back. I think I saw the same anvil on vids as late as 4 months ago, that anvil seems to be holding up. If there is a follow up vid, I've missed it. I just purchased the 137lb version and am hoping that it holds up. Regarding today's vid, nice little pairing knife. Looks great!
@Simplelittlelife 4 жыл бұрын
Thank you for subscribing! I really appreciate that. I haven’t done a follow up video but the anvil is holding up well. Having said that I probably only use it once a month or so. But I’ve had a few really good 5-6 hour sessions on it and even some do those with my kids learning (which isn’t always the greatest for equipment 😆) so I’m fairly hoot with how it’s doing. I hope you find yours to last well too. Cheers👍
@rroberts8501 4 жыл бұрын
@@Simplelittlelife Thank you, sir. I've watched a ton of your vids and for whatever reason, didnt subscribe yet....but that's rectified. I think once or twice a month would be all the use my anvil will see as well. I'm certainly no pro so I would consider it to be 'light usage'. But for the price, I couldnt resist and started looking for review vids and saw yours. Thanks a lot!! Looking forward to skimming through whatever of your vids I may have missed!
@RaulVillaMxl 4 жыл бұрын
what kind of metal do you use for blades? any special alloy ? Greetings from Mexico bro !!
@cameronavery8897 4 жыл бұрын
Nice knife! Do you ever make knives with local viewers or people interested in the craft, not necessarily lessons more like collabs with less set up hobbyists? 😁
@Simplelittlelife 4 жыл бұрын
Thank you! I haven’t yet but that would be cool 👍
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Jason Derulo
Рет қаралды 68 МЛН
Javi’s Family Adventures
Рет қаралды 19 МЛН