Eres un crack tio sigue asi

@@modeonoh Hola gracias por tus palabras de aliento. Ayudan a mantenerse en este campo de los tutoriales. Bienvenido Al equipo! De donde eres?

Hey Izhar 👋 thank you. Hope you and your family are safe!

Simo happy this was useful to you. Help your friends by sharing the video!

Hello @ca-designs happy 😀 this Autocad tutorial was helpful. You missed our last video: goo.gl/gYfw2w

Hello, Happy 😀 my Autocad tutorial was helpful. You missed our last video: goo.gl/gYfw2w

Happy 😀 my Autocad tutorial was helpful. You missed last video: goo.gl/gYfw2w

Hi 👋 Tenzin, I try. Welcome to the team!

Glad this tutorial on numbering was helpful. Join us live this Saturday at 3pm (Pennsylvania Time)

Hola @m4k0v1ch Feliz 😀 que este tutorial de AutoCAD fue útil. Unetenos en vivo todos los Domingos 10am (Pennsylvania US time)

Happy this macro command to autonumber blocks was useful Asad

Hey 👋 @Jean-nm1oo happy this Autocad tutorial was useful 😃 Join us live this Sunday 10am (Pennsylvania US time)

Happy to help 😃

Carlos gracias por Los comentarios. De donde eres?

@@LazyArquitecto México

@@j.carlostorres7815 que bueno tener amigos de Mexico en nuestro equipo. Usas Autocad para trabajo o estudios?

@@LazyArquitecto Es una de mis herramientas de trabajo. ✌

@@j.carlostorres7815 Genial la mia tambien, y de estudios. Espero que te haya servido Los tutoriales del canal en ahorrar algo de tiempo, si es asi presentame a tus amigos para ayudarlos tambien Carlos

Hi Nelson, everything is possible in Autocad. We can meet here kzfaq.info/get/bejne/fqeVgsyJtrO7d4k.html by the way where are you from?

@@LazyArquitecto yeah sure...I'm from Brazil. Let going in touch.

Happy this way to automate numbering in AutoCAD was helpful

Hi Abdul welcome to the team! Happy you find this content useful my friend. Where are you from?

@@LazyArquitecto I am from india

Glad to have many friends from India in our team Siddiqui.. share the channel with your friends!

Welcome to the team Neer! Glad you found this Autocad block numbering tutorial useful. Where do you write me from my friend?

Happy to help. You'll love this macro too kzfaq.info/get/bejne/o9CqlrR9psq2qok.html

Welcome to the team Fzmello. That's the spirit! Where are you from?

Augusta, GA, US.

@@FZMello Happy to have more friends from the US in our team. I'd like to invite you to my first live streaming. I'm nervous!

It will work with any number of attribute but you'll have to change the code. If you're interested we can meet 1 to 1 to help you here bit.ly/2Mz4kGc

@@LazyArquitecto ok, i have a problem. When i put the blok from pallets to model it paste one time and after it show that: "Enter new value for USERI1 ". Some advice??

You can also right click on the block and pick edit block

@@LazyArquitecto Thanks, got it! Does this procedure have to be set up in each drawing? I created a button using the macro and the button works in the current drawing. But if I open a new drawing and pick the button I get an error. The block's name is AUNMB-LT. Autocad says it can't find, "AUNMB-LT.dwg" in the search path. I don't understand why Autocad added the ".dwg". There is no AUNMB-LT.dwg drawing, so what am I supposed to put in the search path? Thank you!

The block needs to exist in your current drawing

Glad you made it work!

Yes that will need a lisp program Khan

@@LazyArquitecto Please can you expand it bit further? Do you mean to say lips routine or a lips programme? If you meant to say lips routine ? Where can I acquire this routine ? Thanks for the reply and your good work!

I also would find this very helpful with tapered insulation numbering, it always adds a lot of time and boring repetition to the task. Cut-to-falls insulation always designate the boards via A, B, C etc. Like A = 25-45mm, B = 45-65mm etc.

Nicoletti, Happy 😀 my Autocad tutorial was helpful. You missed today's video: goo.gl/gYfw2w

Make sure the block exist in your drawing.

Hi Cecelia welcome to the team! To understand your question, are you trying to add visibility states to a dynamic block with a macro?

yes, sorry for the delay.

Ceceli you can add visibility state using -BVSTATE command and following the prompts. Let me know if this help. Otherwise I might do a tutorial about it. By the way Where are you from?

America, NewJersey

Nice to have friends from New Jersey in our team! I'll start live streaming soon. Hope to see you there!

Glad this helped you numbering your blocks quickly. It will required a lisp program to do it with letters. Have your notification bell on so you don’t miss it

Hey 👋 @bharatjaviya5369 do you mean inside the block? I'll put this into my future topics list. Have your bell 🔔 notification so you don't miss it!

Yes it does. What error are you getting on the command line after using it and pressing f2?

@@LazyArquitecto No error, the only thing I changed was block name. My new block name had underscore in it however, so maybe that’s what broke it.

Yes, can you try renaming your block with rename command?

Hi what I'd recommend is to get the macro code here bit.ly/363dyBY so you can copy and paste and avoid any typo or errors.

@@LazyArquitecto Hi sire, Actually made it work thanks to a coment. Right after the bloc name, there is 3 ";". If I only keep 2, things works just perfectly

Glad it worked for you Lewis. 😃 join us live this Sunday 10am (Pennsylvania US time)

Correct, users option is not available in AutoCAD LT Samash

Hey Mohammad Ahmed did you know this Autocad move tricks to make you faster? kzfaq.info/get/bejne/ha2Kg9xitq7ZlHk.html

Try this to fix your palette not showing up: kzfaq.infoCdTv91znSqc?feature=share

Can you send me a picture of it on our fb group? facebook.com/groups/lazyarquitecto

@@LazyArquitecto Dear, I don't use the fb. :-( Could I address the question and the pictures using the subscription e-mail you gave us, of course if you agree? Much obliged!

@@CoolsimexRO sure go ahead

True! happy you found numbering secret useful Arthur

Hey 👋 @jonaDCB happy you could automate some of your work. I'll put this into my future topics list. Have your bell 🔔 notification so you don't miss it!

@@LazyArquitecto really? thankyouu so much. I work in the organization of kitchens and throughout the process we sometimes add or remove equipments, but I can have over 100 equipments that take me a long time to change one by one. And this does not happen only 1 time for each kitchen, but it can happen 4-5 times/each. Cant wait for your tutorial. thank you so so much. PS. My block looks like a leader with triangle with base 6cm and with a small tail 20cm in the direction of the number(height 10 and perpendicular with tail)

@jonaDCB there is no tool for that in Autocad, but I’ll try to create a custom solution but I can’t promise anything

@@LazyArquitecto i very apprecciate you trying

Ahmed always glad to hear from you. To answer your question, you can easily filter out those selections using quick select command.

@@LazyArquitecto by quick selection I can't make such selection, I tried it.

Ahmed I'll make a selection tricks video soon using your request, make sure you have your 🔔 bell notification on so you don't miss it!

Try to use the semi colon 2 times only, or 3 times.

This is regarding the video at 9:02

Happy to help you with that Fan..? Try this, remove the asterisk at the beginning of the macro and try again. Let me know what do you get after pressing F2

You can't edit an enterprise cui. You have to create another profile with the enterprise cui as the main

It's possible but you'll have to modify the code and test it. I'll do an update on this video showing how. Have your 🔔 notification on so you don't miss it!

@@LazyArquitecto I just stumbled across this video that seems VERY helpful, and I had the same question as Cdalav... I have a Block with three Attributes representing Wireless Access Points for large Warehouses. We end up placing hundreds of these in the buildings and having it auto number as we place would be AMAZING... Would you be able to share info on how to handle this same situation with a Block that has multiple attributes?

Send me your block to irving@lazyarquitecto.com and I may pick your question to do a live stream for our LazyQuestion Show. Have your 🔔 notification on so you don't miss it!

Did you save your drawing first, and then drag the block to the palette? Also if the problem persist you can always go online and get any free icon and use it for your command.

Did you drag your bubble block to tool palette first?

@@LazyArquitecto Yessir

Did you specify your image before your delete your other column bubble on tool palette?

Hi which image are you referring to?

@@LazyArquitecto that image search bar side of look in: at 5:00 in your video

@@amitbinjola1451 try saving your drawing first then adding the block to the palette

5 in regular Autocad too. However you'll only need 1 for this LazyCommand

welcome to the team Attarwala! happy to help you with that, however, I'd suggest you to enter the giveaway consultation here kzfaq.info/get/bejne/lct0YK6Wz5O9gok.html since what you ask is a little complex, so I can guide you in a zoom call and help you individually with that or anything Autocad related. You'll mostly win the giveaway since there aren't many people participating yet.

Did you save the drawing and then reopen it? Sometimes you need to refresh the program to take effect

Hey 👋 glad you found this Autocad tutorial helpful. This macro command was tested to work on both versions of Autocad including LT. did you use the useri variable to reset the number?

@@LazyArquitecto Yes, I believe so, I followed your text precisely from your video. I will have to try this also in my LT version as well. Thank you for getting back with me, very much appreciated! I have not been back on AutoCAD of any kind much for over 22 years so other than the basics I am having a difficult time, a little like riding a bike though, you never really forget! Thanks again! I will keep trying!

Hi yes you can. It's a little hard to explain though, maybe I'll do another video showing that

just write F in the Block that you already made it.

Hi Ray 👋 Use USERI1 I explain in the last part of the video.

Hola amigo Vinicius! Si naci en Peru. Que piensas de este nuevo playlist Autocad tutoriales solo para amigos? Tu opinion es importante

Hola Julio, que error te sale cuando uses el comando y presionas f2?

Gracias por tu pronta respuesta. Pero no me sale ningun error solo que no me incrementa el numero y se queda estatico en uno. Tambien he tratado de cambiar la varaible Useri1 para ver si me cambia el numero pero tampoco

@@julioramirez5948 yo intentaria usar todos los comandos, uno por uno y ver cual es el problema. Por ejemplo, Aveces Pasa que un comando solo funciona en una version de Autocad y no en otra. Asi descubriras cual es el comando que no esta funcionando en tu version de Autocad y concecuenteme malogrando el macro

Command: _ATTREQ Enter new value for ATTREQ : 1 Command: _ATTDIA Enter new value for ATTDIA : 0 Command: _OSMODE Enter new value for OSMODE : 703 Command: -INSERT Enter block name or [?]: TH Units: Meters Conversion: 1.000 Specify insertion point or [Basepoint/Scale/Rotate]: Specify scale factor : Specify rotation angle : Enter attribute values 1 : Command: 4 Unknown command "4". Press F1 for help. Command: USERI1 Enter new value for USERI1 : 5 Command: Command: Command: _ATTREQ Enter new value for ATTREQ : 1 Command: _ATTDIA Enter new value for ATTDIA : 0 Command: _OSMODE Enter new value for OSMODE : 703 Command: -INSERT Enter block name or [?] : TH Units: Meters Conversion: 1.000 Specify insertion point or [Basepoint/Scale/Rotate]: Specify scale factor : Specify rotation angle : Enter attribute values 1 : Command: 5 Unknown command "5". Press F1 for help. Command: USERI1 Enter new value for USERI1 : 6 Command: Command: Command: _ATTREQ Enter new value for ATTREQ : 1 Command: _ATTDIA Enter new value for ATTDIA : 0 Command: _OSMODE Enter new value for OSMODE : 703 Command: -INSERT Enter block name or [?] : TH Units: Meters Conversion: 1.000 Specify insertion point or [Basepoint/Scale/Rotate]: *Cancel* Julio C. Ramirez Technical Supervisor CITY OF VANCOUVER 320 - 507 West Broadway Vancouver, B.C. V5Z 0B4 ( 604.871.6145 È 604.209-4595 + julio.ramirez@vancouver.ca 

Parece ser que no reconocer el comando donde aplica la Useri1 porque si vez el Useri1 es asirbad pero lo recoce como un comando

Remove the initial asterisk * and Try testing it again. This will stop the repetition

First you need to drag a block to the tool palette for the image to be generated by Autocad. Then open your c drive, Autodesk, AutoCAD, support, and tool palettes, icons.

@@LazyArquitecto Thank you Master Irving for your kind guidance, tomorrow i i will try again early in the morning same steps as you told me, hope it will work and i can create my crazy autotext block😃👍

Were you able to get it to work Asad?

Welcome to the team Sachin! Happy to help you with that. When you save dwg and drag column bubble block on tool palette, Autocad should create the image for the block automatically. Did you do this step?

@@LazyArquitecto yeh i got it actually the appdata file was hidden. Thanks man. Ur doing great.

@@sachinmaurya1688 glad i could help. Please do me one favor, you know at least one other Autocad user that is currently struggling or wasting time, share this channel with at least one of them, let's help each other out. See you on Tuesday!

It can be many reasons Francis, what error are you getting after using the auto numbering and pressing F2?

What error do you get after using the command and pressing F2

@@LazyArquitecto Yes, finally I got it👍👍👍👍👍❤️ ❤️❤️❤️❤️ One more thing... I couldn't start again with Number 1

@@mohammedumair8785 you need to set up useri1 to 0 I explained by the end of the video my friend

currently this is not possible in Autocad but I'll create a custom command to do that. Make sure you have your bell notification on so you don't miss it!

@@LazyArquitecto ok sir, but soon

you can change video settings on the gear to adjust video speed and hopefully you can follow along better or you can copy and paste code here ➔bit.ly/2Mz4kGc

Happy this numbering command in Autocad helped you Muna!

For that you can get our custom tool by supportting my work either as KZfaq member here bit.ly/LazyJoin or as Patreon here bit.ly/2Mz4kGc

Hi Sharma, yes that's why I do each Tuesday here on KZfaq. make your you have your bell notification on so you don't miss our next week video

Hola bienvenido al equipo! Todo es posible amigo sin embargo necesitaremos algo mas poderoso que un macro, como lisp. Por cierto de donde eres? Me parece curioso que entiendas el video ps aun no lo puse subtitulo español... Hahaha

@@LazyArquitecto soy de Colombia.

Q bueno tener un amigo de Colombia en nuestro equipo! Pronto haré videos en vivo espero verte ahí

Lo mismo pensaba yo, hace tiempo usaba una herramienta que hacia eso para ya no lo recuerdo. Saludos desde Monterrey

What do you mean by lengthy command Daniyal?

@@LazyArquitecto i mean the command string

Is this correct? *^C^C_ATTREQ;1;_ATTDIA;0;_OSMODE;703;-INSERT;tag_rad_01;\;;;$M=$(GETVAR,USERI1);USERI1;$M=$(+,1,$(GETVAR,USERI1)); My bock keeps putting a 1 in every circle...

@@Jintoona Mine too

@@Jintoona Didn't work for me either...did a little digging and it works for me if I delete one ";" where there are three ;;; in a row, i.e., ...tag_rad_01;\;;$M=$....

welcome to the team Iceking007. Some Autocad commands and system variables aren't available in Autocad 2010. Sorry about that

Hi Dan 👋 Make sure that block stair exist in your current drawing

@@LazyArquitecto Hello! have a good day ahead of you. Thanks for your immediate reply to my inquiry, I really appreciate that. Going back to my query, yes, the STAIR-STEP-NO block exists in my current drawing but still, it did not work. I hope you can help me fix this error.

What error code or text appears on command line after you use the macro command and you press F2?

@@LazyArquitecto Good day! Now it finally works, I just change the text style from standard to Arial and it suddenly works. Thanks to you Bro. You are a great help to all of us. God will bless you more for your generosity. By the way, Can I ask one more time? I hope this is not too much to ask from you. I just want to know what is the diesel line expression for text increment? I hope you will share this with us. Until then, and thank you in advance.

First you need save the drawing, to drag a block to the tool palette for the image to be generated by Autocad. Then open your c drive, Autodesk, AutoCAD, support, and tool palettes, icons.

thanks so much@@LazyArquitecto

@Ddream.13 glad this helped

Kumar welcome to the team! Are you subscribe to our newsletter? I send any macros there

There are some commands in the full version of AutoCAD that are not available in Autocad LT. What I will do is start testing some of the commands and system variables individually on the command line used on the macro code and find out the one that is not available to remove it from the code. Hopefully this helps

@@LazyArquitecto Thank you very much. it is actually working after I removed one of the ;

I am looking to use mix of alphabets and numbers. Is it possible with the present macro? or do I need to create a new macro which I have no idea how

@@srihari2414 great 😀

@@srihari2414 i am sure it can work with multiple text attributes and numbers but i will have to test them. You can try and let me know. I can also do a future video about it if your question got picked for our next LazyQuestion live show

Use USERI1 I explained in the last part of the video.

Are you using Autocad LT?

@@LazyArquitecto Thanks for a prompt response. I’m running on Autocad 21.. The best I can get it to do, is to select it each time from the palette- I have to drag it to my attribute, then it allows you to type a number manually before pressing enter…

@@paulbuckley52 what error do you get after using the command and pressing F2?

@@LazyArquitecto I’m not seeing any error codes as such, there just doesn’t seem to be a function working where it automatically numbers the next attribute. I am currently having to type in each count number manually.

@@paulbuckley52 do you know if you are using AutoCAD 2021 regular or LT version?

Hi you'll have to use lisp. Happy to help 😃 join us live this Sunday 10am (Pennsylvania US time)

@@LazyArquitecto you’ll have to do a video on Lisp I’m afraid. I have no idea. I’m in Uk. England. I’ll check what time that is.

3pm I think. I’ll try to tune in this Sunday. No promises. I am having one problem at work on AutoCAD. I used to be able to Move, Copy, etc multiple items by clicking one item (say and door) and then another (another door but different room) and Then move. But what ever I have done. (Not sure) I can only move one at a time now. Not sure what I have done to change this setting. Can you help correct?? Sincerely Martin.

Do you have the block saved in your current drawing? That's what may be causing the issue.

😀

What error did you get after pressing F2 Vince?

@@LazyArquitecto when I click the new tool pallet the one that I copy in the video I think the error is the macros

What Autocad version are you using?

Did you copy and paste the code from what I provided? That's the first thing I'll recommend to make sure you're using the same characters. Here> bit.ly/LazyArquitecto