Simsonn Pro Pedal Overview and Sim Rig First look!!!

Рет қаралды 7,851

6 ай бұрын

This is my overview of the Simsonn Pro Pedals that I purchased from AliExpress. This is a midrange pedal set that is very adjustable and packed with awesome features. These are comparable to the Simjack Pro Pedals that can also be found on AliExpress or Ebay. I also go over my Sim Racing Rig a little (more to come in the near future). If you have any questions comment below. I will also place links for what I have below as well. Thanks for watching!
Links:
SimSonn Pro Pedals: www.aliexpress.us/item/325680...
Seat: www.amazon.com/Type-R-Leather...
Rig: www.ebay.com/itm/125433274411...
Moza R12: www.microcenter.com/product/6...
Moza CS Wheel: www.microcenter.com/product/6...
Contact: Nativerezmedia@gmail.com

Пікірлер: 72

@GregoryShtevensh 2 ай бұрын

How have I only just discovered this channel? Sick mate, sick

@ricardoa1661 2 ай бұрын

going down the rabbit hole of "what pedals should i get ? " i found your video and placed my order by the time i posted this comment ! Also being a MOZA boy i was really leaning towards biting the bullet and getting the CRP set but from what you show and i have seen in my "research " 🤓 these pedals do the job just fine for a bit less money .

@nativerezmedia 2 ай бұрын

Yes, definitely a better buy in my opinion. Way more adjustments, and the ability to modify them is awesome.

@marcushillerstrom25 4 ай бұрын

Thanks for the review, I just ordered these.

@JDM_MSK 6 ай бұрын

yeah boi, lookin good bro !

@NachoRacingTV 6 ай бұрын

Great review!

@wwjnz9263 3 ай бұрын

You don't have to fall into the Simracing rabbit hole, but if you were to, your quality is amongt the better channels. Subscribed.

@nativerezmedia 3 ай бұрын

I already did. More videos to come soon.

@tarushdei 4 ай бұрын

Appreciate the review. Not many people doing reviews on these. It's amazing to see even in the Chinese market, they've got manufacturers undercutting other products that are undercutting western products. These not only are better value than the Sim Jack Pros, but they are more well made and come with calibration software too. They've even forced Sim Jack to respond by improving their product (especially the rotation bushings being loose problem they had). I'm on a limited budget and these are just what I need for pedals to upgrade from my TMX/T3PA setup. They are the best feature complete set for the price, and compete with pedals that are 3-5 times as expensive.

@nativerezmedia 4 ай бұрын

Yup, only thing I dislike about them is the choice to go with load cells on the throttle. It works but a hall sensor would have been just as fine and accurate.

@nitor1928 6 ай бұрын

Good for you. I just recieved package with these pedals. Didn't even install them yet. After crappy logitech, they feel so much better

@nativerezmedia 6 ай бұрын

Definitely better than the Logitech ones. Just takes a little tweaking.

4 ай бұрын

Brazil here, nice video!!!

@nativerezmedia 4 ай бұрын

Thank you!

@cmilli193 Ай бұрын

More pedal review pls, they are perfect

@JDM_MSK 6 ай бұрын

dude that rig is dope

@nativerezmedia 6 ай бұрын

It's OK. Lol

@themadnes5413 3 ай бұрын

Welcome to the fast side ;D (and expensive lol) Good choice with the simsonn pedals, i use the simjack ones. Did a few mods and they are a very good set of pedals.

@nativerezmedia 3 ай бұрын

Yeah, I wanted some pedals that were somewhat upgradable and easy to mod if necessary. It was either these are the simjacks (these were a little less expensive and had a few upgrades that the simjacks didn't (like software and bushings).

@99MrJ99 5 ай бұрын

awesome. Just ordered a set. cheers

@nativerezmedia 5 ай бұрын

Gonna post an updated more software focust video on these in a couple days.

@trollface9916 5 ай бұрын

Bro, thanks for the video, finally I can prove that pedals from aliexpress are better than srp

@nativerezmedia 4 ай бұрын

Yeah, these are definitely better than the Moza SRP pedals. They may cost a little more, but that little extra money goes a long way.

@themadnes5413 3 ай бұрын

Ive seen these rigs on ebay/amazon. Nice to see that it worked out for you. I would suggest if you have a little bit of cad knowledge just to design your own 8020 profile rig. I did that and paid around 300€ for it. If i would order a similar branded one, i would pay about 2-3times as much. Time invested for the design was around 1-2hours, so fairly easy and fast.

@nativerezmedia 3 ай бұрын

I have a few updates planned over the next week or so.

@themadnes5413 3 ай бұрын

@@nativerezmedia looking forward to it :) u have a new sub, keep it up!

@dacke13 6 ай бұрын

Great review, 2hqt rig do you use for putting the wh33l on and chair? It seems compact and good, looking for one to buy

@nativerezmedia 6 ай бұрын

I put the link to the wheel mount rig in the discription.

@daninv4037 5 ай бұрын

Thank you very much for your video! I was searching information for this pedals. I'm in the plan to buy Fanatec bundle very soon. Do you think the base pedal of the simple Fantatec CSL pedals will serve to fit these? The hydraulic wich is an option to buy with simsonn pedals do you recommend to buy 2 or 3 of them, want to buy 3 pedals because I need a clutch? Sorry for many questions, nice setup with VR! Wow!

@nativerezmedia 5 ай бұрын

I only use 2 of the 3 dampers (break and throttle). What do you mean base pedal? Do you mean "base plate"? If so, as long as it's flat you should be able to bolt them on (you might have to drill the holes).

@Cuckain.drifts 5 ай бұрын

Did u hear about the simsonn sc1.2 22nm wheel base?

@PeterDenTV 3 ай бұрын

nice review! Only comment is your single foot gas and brake technique in what seems to be a GT3, you'd gain several seconds learning the 1 foot per pedal technique, learn to avoid coasting on apex approach and also learn using engine braking and trail braking.

@nativerezmedia 3 ай бұрын

I race with two most of the time. Unless I'm driving the H pattern.

@droneandoworld84 Ай бұрын

hola ,tengo la misma pedalera pero de la marca simsonn,son los mismos pero con celula de carga de 130kg ,no consigo ajustar los kg de la celula de carga en ningun lugar del software. utilizo freejoy 1,7,0. es posible ajustarlo!"???

@omarjeffers3574 Ай бұрын

Great review!.. is that the marada sim cockpit? I'm thinking about getting one.. how does it hold up with that wheel base and pedals? Any fkex?

@nativerezmedia Ай бұрын

I actually recorded a review of the cockpit just never got around to uploading it. I can put it up in the next day or two.

@omarjeffers3574 Ай бұрын

@nativerezmedia please do bro..I searched your page for one but could not find it. I actually was about to ask you to do a review. Would appreciate it ! I think alot of people are looking into that cockpit but are not sure because of the lack of video reviews.

@nativerezmedia Ай бұрын

@@omarjeffers3574 no problem, I'll try to upload it tonight.

@joshuatanghal9921 6 ай бұрын

Thanks for this video! How was the software setup?

@nativerezmedia 6 ай бұрын

Stay tuned, I will do a setup video in like 1 day. It's pretty simple.

@regibson23 6 ай бұрын

Gotta start left foot braking!

@nativerezmedia 6 ай бұрын

I did before I added the clutch. I had the break and gas pedal spaced out a tad more.

@mpresto15 2 ай бұрын

Can you do a video on your vr settings?

@nativerezmedia 2 ай бұрын

Yes.

@mpresto15 2 ай бұрын

How do they feel on the rig? I have the other ebay sim tube chassis.

@nativerezmedia 2 ай бұрын

They feel good, you have to make sure you have a sturdy pedal plate.

@Rwilkinson85 2 ай бұрын

Do you feel any flex on your rig using your R12 MOZA wheelbase?

@nativerezmedia 2 ай бұрын

It's very minor, I'll upload a review of the rig in a couple days.

@PeetuhGaming 4 ай бұрын

Just a question, could you just set these down on a wooden board and screw them in and then onto a sim stand? because the metal plate is abnormally expensive.

@nativerezmedia 4 ай бұрын

Yup, as long as you have to correct wood screws you should be fine for a while. Also, if you have a Sim stand you should be able to bolt them directly to the stand. They should line up with most bolt patterns.

@PeetuhGaming 4 ай бұрын

@@nativerezmedia Thing is, i checked the stand i want and it doesnt have a middle position for the brake (i want a manual)... can u recommend me some good inexpensive sim stands that might fit it? But if there are none, would they be too heavy to have inverted (in the same way as those t3pa inverted diy vids)?

@PeetuhGaming 4 ай бұрын

@@nativerezmedia Also, I could just drill the holes in the stand but tbh idk if it's gonna be possible.

@fullsend10r 5 ай бұрын

I have these pedals. Ive had nothing but problems with them. Always need recalibrated and they cut out. Ive been trying to get ahold of company and ive never recieved a response to get the software the claim to have.

@nativerezmedia 5 ай бұрын

I'll later up date a new video with a link to the software.

@CrusaderFan 6 ай бұрын

You only have the Moza accelerator and brake pedals ;)

@nativerezmedia 6 ай бұрын

Yup, I don't plan on buying the moza clutch. It's basically the same as the moza accelerator. I'm not going to keep the moza set because the Simsonn set is better in every aspect pretty much (other than software).

@CrusaderFan 6 ай бұрын

You said you had the brake and clutch pedal at the start of your video.@@nativerezmedia

@nativerezmedia 6 ай бұрын

@@CrusaderFan oh, didn't catch that. Lol... Welp, I'll fix it eventually. Thanks for the heads up.

@CrusaderFan 6 ай бұрын

@@nativerezmedia No worries. Enjoy your new pedals.

@nativerezmedia 6 ай бұрын

@@CrusaderFan will do! Are you a Sim racer?

@ozymatic3291 6 ай бұрын

I've seen a few people mention that Simsonn actually make software to calibrate these pedals. Not found the download myself. Sim Racing Corner did have a download link but it has expired.

@nativerezmedia 6 ай бұрын

I have it.

@ozymatic3291 6 ай бұрын

can you share? I can't find it@@nativerezmedia

@BorjecRus 5 ай бұрын

Pretty sure it can be calibrated by freejoy

@ozymatic3291 5 ай бұрын

@@BorjecRus it can I’ve got a copy of the software now it’s just a lot easier to use

@Kuzz 5 ай бұрын

@@nativerezmediacan you send it plz? Just picked up a set and want to calibrate it

@SIMRIG412 6 ай бұрын

Sound like shit at the end of the

@nativerezmedia 6 ай бұрын

Yup, all sounds that I can't hear in VR. It will get even more loud when adding an H-pattern shifter and clutch (or when I use the pattern shifters). But all of that is expected.