Singer 411G operation and review

Рет қаралды 2,984

Sailing Tess Bess & Sew far north, sail sew explor

6 ай бұрын

Check out this tough vintage sewing machine, all metal interior, top quality machine.
#sewingmachine #sewinghacks #vintagesewing #sewfarnorth #sewing

Пікірлер: 27

@tessdoyle358 5 ай бұрын

I have a 411G and I love my machine.

@bsd2000au2000 2 ай бұрын

Yep loads of spares available because the same parts are used across a couple or 3 decades of many models. The motors are easily available but they can be easily rewound and repaired. Having said that, they just don’t pack it in. They are probably the best machines law a series ever produced. Powerful. Maintainable, super fast, industrial quality with loads of stitches and accessories.

@catherinewhite2943 6 ай бұрын

Very nice machine.

@theunknownchef5825 5 ай бұрын

This a good quality machine, thanks for the video.Should be noted also this model has a one off bobbin case which enables it to do a chain stitch. The same PA motor was used in the 301, the 400,500 series and the whole line of Touch and Sew machines, 600, 700 series machines here in Canada. With all the Touch and Sew models with their plastic gears now coming to the age where the gears are breaking there are plenty of parts machines on the market to get both motors and slanted feet from at very cheap prices. If you ever come across a grey 611g, they are just an updated 411g, with a more standard bobbin case also with chain stitch capabilities. Love the 306/319’s also!

@sailingtessbesssewfarnorth1746 5 ай бұрын

Thank you for that information, I have a 611 to look at online tomorow, that is good to know.

@shannonkelly7210 4 ай бұрын

Just got one of these to take on some tougher jobs - horse blankets (rugs). My Brother SQ9050 was making ‘death thumps’. I needed something more robust so hopefully this works.

@tulaybekture9575 Ай бұрын

Merhaba ile yaradı mı

@paulathomas4944 6 ай бұрын

It's definitely of an era with that styling. But the difficulty in getting spares and accessories for it would rule it out as the main/only machine for me personally. But for a collector I'd think something like would be a must-have.

@sailingtessbesssewfarnorth1746 6 ай бұрын

There can never be an “only” machine 😮🤷‍♂️

@paulathomas4944 5 ай бұрын

@@sailingtessbesssewfarnorth1746 Ah I see. That explains why I currently have six machines 😁

@r.duroucher225 6 ай бұрын

The 319 is also a low shank machine so presser feet are widely available and inexpensive.

@caridadcliment140 7 күн бұрын

Me interesaría una igual,es mi preferida,

@jdhtyler 6 ай бұрын

Interesting thread path "Automatic thread control ATC" that pulls on the top thread before going through the tension disks is also on my 401g but the American machines do not have this only the ones made in Germany. I have seen YT showing when you might get better results not using ATC on stretch fabrics. On my machine to to rotate the stitch selectors I find it is easier to set the stitch length to 1 it seems to reduce the turning force. On my 401g the lower bobbin flat tension spring had snapped between the two screws, bodge I flipped the broken bit over so it now traps / clamps the rest of the flat spring and it still sews. I do have some spare industrial springs that I will grind to fit. The bobbin case apparently is common across the range of the 400s and possibly the 500s ? Thanks it was a great demo.

@sailingtessbesssewfarnorth1746 6 ай бұрын

Thank you, those are some interesting observations, I wasn’t aware of the ATC differences in the US. Good luck with your spring mods.

@1953childstar 3 ай бұрын

When you set the stitch "width" lever to 1, the zig zag is still engaged, so the stitch will not be the best. The "theory" is good though, but the mechanism is still turned on.

@1953childstar 3 ай бұрын

@@sailingtessbesssewfarnorth1746 Yes, in the U.S. "Automatic Thread Control" was only available on the model # 500 and 503 machines. The U.S. market seemed to "balk" at the innovation..

@graciemulatobandamarzan4245 4 ай бұрын

Granny is 100years old And so does her machine is working

@juancarlosfariasandrea799 Ай бұрын

Como graduale rl tiempo aLa 411G

@hibaali3843 3 ай бұрын

I want to ask, is there any re-stitching at the beginning or end of the fabric?

@sailingtessbesssewfarnorth1746 3 ай бұрын

If the start and end of the sewing run is in the seam allowance, there is no need to back tack.

@hibaali3843 3 ай бұрын

@@sailingtessbesssewfarnorth1746 Can I embroider with this machine?

@sailingtessbesssewfarnorth1746 3 ай бұрын

You can embroider with any machine

@sailingtessbesssewfarnorth1746 3 ай бұрын

This is my FB group, it’s a good place to get Suport for sewing and sewing machines. facebook.com/share/pfoYmo8NrNS6eeuS/?mibextid=WC7FNe

@GarterGa1956 5 ай бұрын

. . Does this one have the Chain Stitch ability ?

@sailingtessbesssewfarnorth1746 5 ай бұрын

No. I don’t belive that one did, but maybe you can get attachments for it.

@1953childstar 4 ай бұрын

You can see the "Chain stitch guide" to the left of the take up lever.. It needs a chain stitch throat plate and either bobbin case insert or bobbin case to chain stitch.

@cakesd4199 4 ай бұрын

Yes , I have chainstitched with my 411g. Remove either the straight or zigzag needle plate and use the chainstitch plate with the little "finger" underneath. Remove the bobbin, thread through the additional thread guide in the slot under the take up, lengthen the stitch, reduce top tension to around 1-2 and begin stitching!