Do it bro!! Fun and easy to work on compared to newer vehicles lol
@elmort73764 жыл бұрын
Have a lower 03 crew cab lowered grey with stock rims but thisss oneee 😍😍
@edgardelossantos49454 жыл бұрын
I liked how the Dodge ram looked .. I would like it. Send a video of how the front and rear suspension system changed thanks .. Greetings from Panama
@Boosted_Kev3 жыл бұрын
looks good bro im still trying to decide what to do with my 2nd gen, looks nice lowered.
@cesarcora18443 жыл бұрын
I got the same set of rims in my 98 RAM but i can't put the front hub caps ,where do i get that hub cover?, thanks
@nandoscustoms77863 жыл бұрын
Nice drop bro i want to do mines too did u have u cut the frame where did u get the drop kit ?
@keithhaynes5348Ай бұрын
Whered you get that horizontal grill?
@adansantiago2070Ай бұрын
What website you get it at ?
@tinoromero76783 жыл бұрын
Looks like you going to end it up with the sterling wheel in your hands😂👍
@nicholasyoder2 жыл бұрын
I think I’d put the other rims on it but it looks good bro
@Pretyboyflako13 жыл бұрын
So you cut off the springs? And what brand is the drop kit?
@madram17273 жыл бұрын
No they’re 3” drop springs, it’s a 3/6 eBay kit bro
@ramzi.36064 жыл бұрын
Niice maan, I like this one more then the other ram. How long have you had your truck for?
@madram17274 жыл бұрын
I’ve had my black one since Jan 2017 and the single cab since July of this year
@ramzi.36064 жыл бұрын
@@madram1727 cool man, keep up the videos
@MEMPHISBOI_9014 жыл бұрын
New sum bro love the truck I have a 94 I’m restoring
@madram17274 жыл бұрын
Thanks bro and that’s what’s up. What’s your plan for it?
@MEMPHISBOI_9014 жыл бұрын
MadRam17 it have a 5.2 engine I’m upgrading to a 5.9 I want to lower it like your’s
@mystical3882 жыл бұрын
Does it bounce alot?
@orangeponygsxr93662 жыл бұрын
I like how u said you were gonna film u doing it to show everybody then just cut to it being done haha
@graysoncarr4643 жыл бұрын
Where’s that hood from?
@adaavi31785 жыл бұрын
nicee🔥🔥👌🏼👌🏼
@ledgercook57613 жыл бұрын
Working on a friend’s 98 ss/t. We have big plans!
@madram17273 жыл бұрын
Hell yeah man hopefully it comes out sick!
@cameronmcdaniel5977 Жыл бұрын
What kind of bumper is that
@kerrymartin55143 жыл бұрын
I also have a 1996 4x4 > I was going to get 26 inch rims but then i would have to get rubber bands pretty much, and that's okay if you're going with that huge rim look tucked up under, you can get away with it if your "tires" don't go over 34" tall tires and I heard with 35 inch tall tires you will still have to do some body trimming and possible grinding and I would also like to let you know that if you get 24 inch rims the actual visual part of the rim will be more like 26 and if you get 26 inch rims the visual part of it will be more like 28 in because they measure what are the bead of the tire sets so the rims are actually looking bigger and what they really are, so I'm going to 24" which will appear as 26" .... that's what I'll be putting on my 1996 4x4 Dodge Ram Sport, , and with the 24in rims that look like 26 is much safer for the rim because I will be able to get 4 inch sidewall.... so protecting your rims is also important.... figure out what tire size Tire you have to put a 24 inch rims but will still not exceed 34" tall. I also heard that 24 inch rims with 34 inch tall tires will clear if you keep your rims at 10 inches wide or less with a backspace of 5.75" and another thing I found very difficult about the 26in rims is that everybody has tires that are 12-1/2" to 14" wide which would rub the hell out of everything... Then you would need like 2" spacers to kick the tires out word, but then your tires will turn into the door frame area and hit their even harder and the front bumper area and that's probably why you will have to stay with a 24 inch rims with no choice.... because you can get tires that are not so wide like 12" wide or less... I've been doing the math for a couple years and decided to get the 24" rims which appear visually to be 26" when you put a tape measure acrossed.... good luck
@kennethjackson247611 ай бұрын
Bro you got a link to the kits?
@jayflame54033 жыл бұрын
I have 96 2nd gen to I want the same kit but does it drive bad with out the c notch
@madram17273 жыл бұрын
Yeah it smacks on big bumps bro, I would highly recommend getting a c notch if you do a flip kit
@AbandonedExplorationUrbex19793 жыл бұрын
U weren't happy with the length of the springs so u cut a coil off? I think it sits nice. Maybe get 2" drop spindles. I'm about to get the sane year ram and this is the kit I'll get. I wouldn't of went with less lower kit. 👍
@madram17273 жыл бұрын
Yeah drop spindles would be nice I just went the cheap way lol
@miraalnilam95402 жыл бұрын
what kit is this, also is the kit still holding up well now?
@madram17272 жыл бұрын
3/6 eBay kit, I haven’t driven the truck for a long time because I blew the engine and I’m currently hemi swapping it. Recently installed djm arms up front for a little more low, and getting the rear monster notched to try and get 8-10” drop in the rear
@miraalnilam95402 жыл бұрын
@@madram1727 hella, thankyou. good luck on the hemi swap, dodge and there crate engines seem like they would usually be pretty easy so i doubt it would be to hard.
@kumcellrat3632 Жыл бұрын
where can i but the shocks i already did my flip kit i just need the shocks?
@cuh_20239 ай бұрын
You can buy lowering shocks from bel tech
@jonathancrippen2440 Жыл бұрын
Does the frame hit without a c notch?
@madram1727 Жыл бұрын
Yes it does bro if you do a flip kit I highly recommend doing at least a c notch
@jorgemendoza32404 жыл бұрын
Te la cambio vato. Yo tengo una 95 dodge asi. Asi. La quier como esa. Se be mui bien.
@RobertoRodriguez-uc4xz3 жыл бұрын
Hey i 1995 and sometimes it turns off what could the problem be ?
@martinrodriguezjr33833 жыл бұрын
iac valve
@gustavobalderas58004 жыл бұрын
Did the Frame hit without C-notch?
@madram17274 жыл бұрын
Yes it did lol I would recommend getting a c notch if you do a flipkit lol
@AbandonedExplorationUrbex19793 жыл бұрын
@@madram1727 what size C notch?
@rrojas17743 жыл бұрын
where did you get this lowering kit
@madram17273 жыл бұрын
eBay bro
@anthonyesqueda13454 жыл бұрын
I have a original sst and i wanna drop it like that
@madram17274 жыл бұрын
Do it!! 😎😎
@codybaker3603 жыл бұрын
Srt 24 black
@luisdelarosa44814 жыл бұрын
Run 3” pipe with a slp loudmouth bullet and dual 4” tips no cats
@madram17274 жыл бұрын
I’ll look into the muffler, but I do plan on running 3” single pipe to my stock 4th gen tips out the side.. I was considering a borla muffler tho!
@luisdelarosa44814 жыл бұрын
I used to run a single 3” pipe front all the way to the rear with dual 4” corsa tips and a slp loudmouth bullet it sounded real good I liked it because it sounded LOUD and aggressive but I’ve heard good stuff about the borla atak as well
@kerrymartin55143 жыл бұрын
Looks really good for having 254,000+
@madram17273 жыл бұрын
Thanks man, she has some rust and imperfections but in my opinion not bad for the miles! Maybe one day I’ll get around to doing the body work and such but for now I’m just trying to make some power 😂
@TheVegasMoney3 жыл бұрын
@@madram1727 how you getting more power from her? I'm working on flowmeter exhaust 01 2nd gen 5.2
@TheVegasMoney3 жыл бұрын
Hollowed out the three cat out. I don't need them
@TheVegasMoney3 жыл бұрын
330,000+ miles now I wanna see a half a million+ 😎
@madram17273 жыл бұрын
@@TheVegasMoney well I had swapped a cammed 5.9 into it but ended up pulling the cam kit and heads off to put on the turbo 5.2, it’ll be getting a stock 5.9 next year tho
@produccion14434 жыл бұрын
Nice Bro you got an IG or something to follow the build
@madram17274 жыл бұрын
@MadRam17 on Instagram bro I’ll follow you back 👌
@AbandonedExplorationUrbex19793 жыл бұрын
@@madram1727 I'll follow u
@AbandonedExplorationUrbex19793 жыл бұрын
@@madram1727 I just followed u
@dlo__39294 жыл бұрын
How much was the kit bro?
@madram17274 жыл бұрын
I think like 400 if I remember right bro it wasn’t bad at all
@dlo__39294 жыл бұрын
Im thinking about getting a 95’ Ram single cab bro 130k miles. Not bad at all for 3000 but ima lowball the guy for 2000 lol I think the guy is hurting for money.
@madram17274 жыл бұрын
392_Skandoe that’s a good deal bro, but you’ll have a hard time getting a 95 tuned because of obd1 so I would recommend 96+
@dlo__39294 жыл бұрын
MadRam17 I also saw a 01 single cab with 77k miles you think I should go with that one instead? He’s asking 4K but Idk how much to offer
@madram17274 жыл бұрын
392_Skandoe thats low miles bro, I’d offer 3 and see what happens lol. I was able to pick up my 3rd gen for 3500 and to me that was a steal, but I paid about the same for my single cab with 255k on it 😂
@tjcheek71614 жыл бұрын
Were did you get kit
@madram17274 жыл бұрын
eBay bro
@jackgoff82602 жыл бұрын
How much was kit?
@JorgeGarcia-on8rg4 жыл бұрын
What’s the kit called bro
@madram17274 жыл бұрын
I can’t remember the name but it was an eBay kit bro
@timconley16773 жыл бұрын
I have e one myself
@kerrymartin55143 жыл бұрын
I thought if you do a axle flip that there is also a Kit to cut out the frame about the axle.
@madram17273 жыл бұрын
Yeah I would recommend doing a c notch so you don’t slap frame on every bump lol