HELLO FRIEND WELCOME TO OUR KZfaq CHANNEL
DETAILS ABOUT THIS POWER TILLER
POWERED BY 48V 75AH LIFEPO4 BATTERY PACK
MOTOR POWER 750W , PEAK 1.5KW
RATED TORQUE 100 NM. , PEAK UPTO 200NM.
MOTOR RPM 550 ,
GEAR 14 TO 43 , AGAIN 14 TEETH TO 50 TEETH SPROCKET ON WHEEL.
RPM ON WHEEL 50 MAXIMUM.
MAXIMUM SPEED 4 KMPH
WORKING TIME ON FULL LOAD 10-15 HOURS.
CHARGING TIME 8 HOURS WITH 10AMP. CHARGER.
CAN WORK IN 1.5 to 2 ACRE PER DAY.
REVERSE MODE ALSO AVAILABLE WITH 2 KMPH SPEED .
MACHINE WEIGHT APPROX 95 KG.
ONLY GEAR TYPE MOTOR SUCCESS IN THIS TYPE OF PROJECTS WITH MINIMUM RPM.
DON'T USE HUB MOTOR. ( 💀 )
Size of this machine
38 inch angle each side ,
8 inch width from inside,
Wheel size 140 cm. Cover in 1 round
Diameter is 17.33 inch
Wheel width 4.25 inch
You need to select hard round plate.
BEARING SIZE UC206 , 30 MM. BORE
HIGH QUALITY.
MIDDLE SHAFT 15 INCH , 30MM.
HANDLE PIPE SIZE HALF INCH , 4 FEET LONG EACH.
SPRAY PULLY 12 INCH.
I SPENT 3 DAYS IN THIS PROJECT.
THANKS FOR YOUR SUPPORT
TOTAL COST 53,000 TO 55,000 RS.
8766326212 ( ONLY WHATSAPP MESSAGES )
PLEASE DON'T CALL.
AJAY KUMAR