Ingersoll Rand w5152 / w5132 impact wrench review

Рет қаралды 115,967

8 жыл бұрын

This is the W5152 20v cordless impact wrench from Ingersoll rand. It is their first Brushless cordless tool. It is a compact impact wrench and puts out 365 ft-lbs of reverse Torque.
Product in video:
W5152 IMPACT : amzn.to/2qJEdUh
Socket set: 1/2" drive Impact deep metric amzn.to/31O0CfS
Socket set: 1/2" drive Impact deep INCH amzn.to/2JqQYd4
Socket set: 1/2" drive Impact SHALLOW metric amzn.to/31Pl93I
32mm axle nut socket: amzn.to/2pituQe
As an Amazon Associate I earn from qualifying purchases.
It is a great lightweight alternative to the full size impact in their lineup the W7150 which you can see in action in this video:
• w7150 impact wrench re...
but it obviously does not put out the same amount of power.
The impact is meant for smaller fasteners and it is great for times where space is limited. On the larger impact where you may
need to use a swivel or extension this impact can easily reach into tight spaces without a swivel. It is almost half the size of the full size impacts. I don't have the full size IR to compare it to anymore but here is it compared to other impacts in size
goo.gl/photos/6ePEhRTs95VKn7cP7
It has 3 light settings and a full SMD LED light ring.
It is not just a couple of LED's behind a diffuser the whole ring is lined with LED's. The light also has a setting for use as a work light.
The impact has 4 power settings: hand tight,wrench tight,mid power and max power.
On reverse it is max power. The battery that came with this kit (w51520-k12) was a 5AH battery.
You can buy tool as a bare tool, with one 5AH battery and charger or with 2 batteries a 2AH and a 5AH that is under the model w5152-k22.
There is a 3/8 version of this impact under the model w5132 with the same power. The difference appears to only be in the anvil size. I bought the 1/2" because I mostly use
1/2" sockets.
I will say if you are worried about scratching it Ingersoll Rand apparently has a cover/boot coming out for it. The front nose cone is polished aluminum and looks beautiful but
will scratch very easily.
This impact has almost 130ft-lbs more torque output than the Snap ON CT8810
Ingersoll has now upgraded their full size impact wrench which will be the most powerful on the market it is named the w7152.

Пікірлер: 92

@singlecams Жыл бұрын

Please check out my amazon store to help support the channel www.amazon.com/shop/singlecams/

@Iwished4 7 жыл бұрын

Powerful little impact, I've always liked ingersoll rand products over the main market yellow and reds. They seem to put a little more details and good quality parts into their products.

@Photostudioww 5 жыл бұрын

Great tool demo👍

@agnaldogomes84 7 жыл бұрын

A ingersoll rand está de parabéns. ..para uma pequena ferramenta ela demostra ter um bom poder de impacto. ..

@singlecams 7 жыл бұрын

Obrigado

@ZacharyE 7 жыл бұрын

I want this simply due to the bad ass light on it. I have 1/2" IR Impact 20v and it annihilates worlds..... (and bolts)

@TheBrand83 7 жыл бұрын

Looks like a pretty good little impact.

@johnlandis2106 7 жыл бұрын

Very good tool reveiw

@CarShed68 7 жыл бұрын

not bad not bad! looks very powerful tool!

@singlecams 7 жыл бұрын

thanks buddy

@bio10155 6 жыл бұрын

This is one of the most fun video I've watched lol

@Djm9393 7 жыл бұрын

do you personally like it and would recommend it than snap on

@gustavomelendez3477 8 жыл бұрын

good video, thanks!

@singlecams 8 жыл бұрын

Thank you Gustavo!

@d-nice2866 7 жыл бұрын

i like when it tested on old rusted shit you can see the real power in them. the other videos i seen they struggle on wheel lugs

@addictedtopussy69 8 жыл бұрын

love watching your videos of the tools being put through their paces. My top favorites are the Ingersoll and Makitas. I ended up with both brands in both 1/2 and 3/8th impacts. I will have to buy this new baby as well. I'd like to see those angle impact ratchets in action if you plan on testing those as well. Whats selling me is that work light setting option, and the handtight setting.

@singlecams 8 жыл бұрын

Thank you for watching and comment glad you like it :) Id love to try that IR W5350 but I was reading the torque is more like 100ft-lbs than 180 and I know that is too low for most of the rusted stuff i'm always working on so it kind of scared me off lol as it is not cheap so I was just not sure on that one :) The right angle impact is just an impact it doesn't have the ratchet so you can't manually break the fastener loose so if the torque isn't there you are out of luck and have to break out the ratchet

@addictedtopussy69 8 жыл бұрын

I had my doubts about the right angle impact as well. Didn't realize you can't break it loose first like those air ratchets. I'd wish ingersoll would come out with an angle cutter or grinder already. Thanks for the great video tool action.

@singlecams 8 жыл бұрын

IR has a ratchet but it's not a impact ratchet its similar to the milwaukee ratchet the model is R3150 . Oh yeah an angle grinder would be really cool. I know what you mean without the ratchet part on the right angle impact it kind of loses it appeal

@singlecams 8 жыл бұрын

just saw this thought of you www.garagejournal.com/forum/showthread.php?t=339141

@addictedtopussy69 8 жыл бұрын

haha. The ingersoll 12V series have ratcheting mechanism. The people on that thread seem to like mentioning Milwaukee tools a lot. Milwaukees are good at inflating their numbers and looking good on paper, feeling good in the hand and nice looking design but underneath all that front houses an inferior design compared to makita and ingersoll in my opinion. Its an interesting thread there, thank you for the link and keep up the tool testing action videos!

@Everything91111 7 жыл бұрын

Which is the best W5132 or W5152 and are there companies that are better than this Bush or Makita product

@Gleb1986Kiev 8 жыл бұрын

Like before video get started)

@singlecams 8 жыл бұрын

Thanks man :D

@markiedee4040 7 жыл бұрын

which one should I buy this or the Milwaukee mid torque

@jorgeardon2040 6 жыл бұрын

Demarcus Williams what did you buy? Mid torque is the way to go it have so much power

@benjaminward5295 6 жыл бұрын

Love the dial on the back compared to push button on other brands. When your hands are full of shit you will love that feature.

@willrobinson5902 5 жыл бұрын

The Ingersoll Rand power sockets would have helped, with those wheel hub nuts

@dungcukhinendungcuiencamnh4064 6 жыл бұрын

Good

@stevensrspcplusmc 4 жыл бұрын

Just think how it works with pb blaster

@user-lb5mp9xe7h 7 жыл бұрын

good

@BobRizz. 5 жыл бұрын

Your W7150 and this impact still going strong? How are the batteries holding up?

@singlecams 5 жыл бұрын

My trigger burnt up on the 7150 but the battery is fine. I sold this impact. They are very expensive the batteries and tools.

@word2RG 5 жыл бұрын

what will replace it? @@singlecams

@20racks22 5 жыл бұрын

I’m sold I’m ordering one rn

@dulauhdagame5827 8 жыл бұрын

on the hub nut you didn't push out the dent on the nut thats why it didn't take them off

@singlecams 8 жыл бұрын

I have posted many impact wrench videos on my channel from IR , Makita , Dewalt and even RYOBI and never have I unstaked an axle nut. There must be 40 axle nuts I have posted being removed without unstaking them. I even posted a video showing the torque it requires to deform the stake of the nut but people continue to believe this tab will stop the nut from turning...which is not the case. I have never met a dealer mechanic that unstakes honda axle nuts...because you do not have to as they are not staked over threads.

@aux1z11 3 жыл бұрын

I just ordered a 7152 and thought I was watching a 7152 vid and thinking this thing isnt that good but after watching the vid i seen it was a lesser model.

@Djm9393 7 жыл бұрын

where can i purchase the tool from bro?

@trinidadbreeze 4 жыл бұрын

get w7152 1500 ft lb

@sucioslife6214 8 жыл бұрын

Do move videos of your Ef but good review

@singlecams 8 жыл бұрын

thanks man not much going on right now with it but will post if i have anything new :)

@henrik4740 6 жыл бұрын

My dad worsk with Ingersol Rand

@CarShed68 7 жыл бұрын

new video wanted :)

@CarShed68 7 жыл бұрын

@dulauhdagame5827 8 жыл бұрын

oh ok

@roshanluchmun6743 7 жыл бұрын

What is the price

@singlecams 7 жыл бұрын

if you google it you can find different prices but they sell bare tool, kit with 1 battery and kit with 2 batteries

@robertstiffler1251 8 жыл бұрын

Bill Clinton does an impact wrench review

@78cobra 6 жыл бұрын

Love the first 5 or so minutes talking about the tool. But this is more demonstration than a review. Wish demonstration was in the tittle

@j-vsautogarage6069 5 жыл бұрын

Make a video taking off a Honda crank bolt.....

@Gman9091 5 жыл бұрын

A-K 47 it can’t do it. Not even with the fat cannon socket made to take them off. I have the bigger 7150 and it won’t do it.

@axtra92 7 жыл бұрын

where are you from? why are some videos from russia? or something like that

@sss8909 8 жыл бұрын

why are you trying to remove the axle nuts without bending the locking pins back . hammering it without banding back the small tab is stupid .

@singlecams 8 жыл бұрын

I have posted many impact wrench videos on my channel from IR , Makita , Dewalt and even RYOBI and never have I Unstaked an axle nut. There must be 40 axle nuts I have posted being removed without unstaking them. I even posted a video showing the torque it requires to deform the stake of the nut but people continue to believe this tab will stop the nut from turning...which is not the case. I have never met a dealer mechanic that unstakes honda axle nuts...because you do not have to as they are not staked over threads. The only stupid ones are the people sitting there with a chisel trying to unbend the tab and then stick an impact on it. Anyone who believes this impact could not remove the axle nuts because of that .065 thick tab doesn't know what the they are talking about.

@stevensrspcplusmc 4 жыл бұрын

singlecams shut him up lol

@gomezmarco4106 4 жыл бұрын

versus INGERSOLL RAND W5152 !!!

@gauloiscitoyen1308 4 жыл бұрын

w5152 90 % of the job

@TheBoxster1998 7 жыл бұрын

the one I bought could not even remove a lug nut from a 2015 Hyundai elantra rated at 80 foot lbs. here is the video kzfaq.info/get/bejne/nsegpceVt9W9iZ8.html

@singlecams 7 жыл бұрын

I don't know what to say obviously it can when it is working right remove more than lug nuts. I would get another one and try, maybe it is defective. did you mail order this? Try the heavy socket and take a video

@TheBoxster1998 7 жыл бұрын

singlecams I did try the impact socket and it didn't remove it. I ordered it from amazon and returning it. I'm sticking with my W7150. Glad yours worked.

@singlecams 7 жыл бұрын

I replied on your video with a link to another video I'm not sure if it will show or go in your spam folder. Thanks for sharing your video.

@toolboss8410 8 жыл бұрын

nice review ...who's did the talking in vid ...he sounds like he's from Alabama...lolol

@toolboss8410 8 жыл бұрын

should of brought dewalt

@toolboss8410 8 жыл бұрын

I'm talking about the big one silly

@toolboss8410 8 жыл бұрын

Def bro ...it's awesome ...I was only saying dewalt so you can show what the rand couldn't do ...the dewalt could

@quackster916 7 жыл бұрын

TOOL BOSS they 1/2 IR is by far hands down the best unit on the market

@alexmendoza1533 7 жыл бұрын

TOOL BOSS dewalt is ass Makita Milwaukee and without a doubt IR is way beyond dewalt...

@trinidadbreeze 4 жыл бұрын

365ft lbs not so good when you get to heavy duty bolt didn't work on that axle nut get w7152 i got one on the real. 1500 ft lb

@rja12 3 жыл бұрын

365 is the forward torque #. 550 ft-lbs of nut-busting torque. Obviously still not as powerful as the 7152 but for it's size, it's awesome.

@singlecams 3 жыл бұрын

Like and subscribe and click bell to get notifications👍👍

@augustosandoval8193 2 жыл бұрын

Batman

@JoeCnNd 6 жыл бұрын

Wife: hunny at work today I did a heart transplant where I pumped the donor heart with my own 2 hands.... what did you do today? Husband: I went to the hunk yard and took bolts off of old vehicles and made KZfaq videos for it.

@bakedandsteaked 6 жыл бұрын

@saigon9643 8 жыл бұрын

look good ,,but dewalt better

@singlecams 8 жыл бұрын

this is a compact impact wrench see pictures here goo.gl/photos/6ePEhRTs95VKn7cP7

@efremovpavel 3 жыл бұрын

так и не смог ступичную гайку открутить

@nicparker3809 5 жыл бұрын

good way to burn the motor out.

@ThatGuyKappa 7 жыл бұрын

these IR have very flimsy battery holding mechanisms and the handle frames bend alot!, our started to bend and almost split, well it's on it's way, it's about 2 years old now, and the batteries just dont hold up, maybe poor lower quality cells

@singlecams 5 жыл бұрын

Ingersoll Rand W7152 Impact Wrench Review kzfaq.info/get/bejne/mOBgiNqo18fTp4k.html

@user-lk2zy1dy8m 7 жыл бұрын

Block me.. But not the down votes. Jiiiiiizzzz z

@markiedee4040 7 жыл бұрын

why don't you use your own voice #weird

@markiedee4040 7 жыл бұрын

I've just always wondered why you wouldn't use your own voice,ass a black man I would love to see another black man out in front doing tool reviews,I hope I didn't offend you.

@singlecams 7 жыл бұрын

no prob buddy

@markiedee4040 7 жыл бұрын

Let's get back to tools,I just bought that Milwaukee 2861, it's a game changer

@singlecams 7 жыл бұрын

I bought one too I havnt had chance to make vid. How do you like it. I like the 3 speed , it is small and nice weight, wish they changed the light its too weak. It has a nice hog ring too like its not just a piece of wire it is beveled so the socket slides on and off nice! Makes me want to sell my dewalt and buy the big milwaukee too. Have you ever seen the one key impact? I tried it and it is very cool the impact has adjustable torque and speed seperately! So you can go full rpm and it won't impact when the nut/bolt tightens down....I dont know how they do that but it is very cool

@markiedee4040 7 жыл бұрын

I sold my dcf899 to buy it.I thought about buying the one key,but I couldn't pass up on 600ft IBS in a tool that small, I've had a lot of cordless impacts and I like this one more than anyone I've owned

@arturoangelsanchez 7 жыл бұрын

No good

@slpip 7 жыл бұрын

It is crap. Struggle too much for big bolts/nuts. Only good for small bolts/nuts. Should get a mini air impact instead. I am sick of IR tools.

@slpip 7 жыл бұрын

I trusted the IR hammerhead review and I made a mistake to buy one. It is small at the head but mine leak out grease at the head and the handle everywhere. The power of the IR hammerhead can't take off my ML 320 lug nuts at 50 ft-lb. Over one year without used it once, warranty expired and ended up with a crappy air tool. No, your review is right. You didn't knock out the wheel bearing nut lock so that it made the impact tool struggle so much or it couldn't even take off the nut because of the nut lock. People can see the IR struggling hard to take off large bolt/nut. We want to see a fair review. Thank you for the review video.