thanks for showing me how to make something with a one off part so i can never build or get my time back
@ahmanichastink64682 жыл бұрын
👍👍👍
@joshsundiwa Жыл бұрын
thanks for sharing
@WheelingChannel Жыл бұрын
Thanks for watching!
@Paul122M2 жыл бұрын
Does it need an one way check valve to funtion? I tried to use the siphon method to improve the performance of a normal mist nozzle. I used a T connector, a normal mist nozzle and compressed air, but i cant make it draw liquid from the water container because the air escapes through the water container. Any tips to make the siphon work properly?
@WheelingChannel2 жыл бұрын
Email me some close-up images of your setup. You can find my email in the about section.
@WheelingChannel Жыл бұрын
I hope this will solve your issue kzfaq.info/get/bejne/gdt4qpqascy8Y2w.html
@vansonh22 жыл бұрын
I hope to see part 3 with waster oil bunner ^^
@WheelingChannel2 жыл бұрын
I will test its ignition in part 5 or part 6. In part 3 some updates. In part 4 you will see final finished nozzle attached in burner with fuel system. Thanks
@vansonh22 жыл бұрын
@@WheelingChannel thank for your idea So helful
@ruurdfennema25222 жыл бұрын
is the scooter part needed if yes what is it for in a scoooter
@WheelingChannel2 жыл бұрын
That is not necessary please wait I am soon going to upload an updated version of the nozzle with an angle-type needle valve. In that, the scooter part will not be required. Thanks