what a system, huge advantage especially to law enforcement
@sammysimms8 жыл бұрын
WOW!! Awesome video. I think the full on cruise light function would also work great for pilot cars as well. Along with the all white scene lighting would go great when escorting a wide load under bridges.
@SIRENNET8 жыл бұрын
Thank You :)
@sammysimms8 жыл бұрын
Does the BluePRINT Control System only work with Sound Off Signal products?
@SIRENNET8 жыл бұрын
Using Soundoff Signals products along with it will yield the best results. You can use some other Manufacturers lighting along with it so long as the internal voltage regulates correctly.
@goigle8 жыл бұрын
Wow, the Blueprint software is (at least partially) coded in C#, pretty cool
@life101ization8 жыл бұрын
Take my money 👍🏻
@TyeWills6 жыл бұрын
Brendan Burns take my departments money.
@Dudemieser6 жыл бұрын
I have speculating for years, However now I am positive the upfitting of this vehicle equals ....or exceeds the initial vehicle cost........I Love it ! Lol
@SIRENNET6 жыл бұрын
This example, being for demonstration, has a lot more equipment then you'd find in a vehicle used by a department. It does have a higher cost with that in mind and the install process & programming is more involved with all of the product being utilized. When it comes to the total for vehicles in normal service, it'll be well under that of the actual vehicle.
@cathymai01114 жыл бұрын
I just like the look of the lights
@RegularTennesseeJoe6 жыл бұрын
Nice product!!!! A lot of thinking put into the design!!!
@SIRENNET6 жыл бұрын
Soundoff's come along way :)
@Ho11yw0065 жыл бұрын
Amazing Demo!! I wish my dept used blueprint!
@SIRENNET5 жыл бұрын
Thanks very much ;)
@JoseSanchez07953 жыл бұрын
This is soooo great. Waoooo!!!
@edwardperez4944Ай бұрын
How do I turn off the internal beeping when I have the lights activated
@SIRENNETАй бұрын
You'll need to use the Soundoff BLUEprint software to turn off the internal beeping. • In the top left corner, click on “manager blueprint devices” • Middle of the screen, click on “panel setup” • Along the righthand side, you’ll see the notification on/off “bell”
@PowerHamster648 жыл бұрын
Thanks for the great video! Is it possible to download and play with the software as with Whelen's system?
@SIRENNET8 жыл бұрын
Thank You :) We're glad you enjoyed our Presentation. At this time, it's not possible to download the System for touring around within it.
@volwars5 жыл бұрын
What I kind of miss is a switch in the door that cuts off the siren when you get out after a pursuit. That way you dont have 5+ cars with sirens on when doing a felony stop.. Less stress, less action to take (finding and getting back into the car with siren still on)..
@SIRENNET4 жыл бұрын
A helpful feature with BluePRINT is the park kill function. Instead of a door pin/switch, when the vehicles shifted into park, the siren turns off automatically.
@volwars4 жыл бұрын
@@SIRENNET Even better 😎 does that ship to Europe? 😏
@SIRENNET4 жыл бұрын
@@volwarsWe'd like to help, but due to Soundoff's strict restrictions on this product (certification & support), we can't. Thanks for asking though :)
@OnBakePlatinum8 жыл бұрын
I wonder why those two square under-hung lights weren't a part of the super duper takedown.
@SIRENNET8 жыл бұрын
The big square guys weren't adjusted into the Super Takedown Program. With a few clicks in settings, they can be added to the mix. :)
@Unclenate10003 жыл бұрын
My dept uses blueprint but im sick of the patterns they choose to use since they have the longer light bar which makes the wigwag pattern asymmetrical
@josecruz-vy9zv5 жыл бұрын
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@06RedfireGT8 жыл бұрын
Have you guys done anything with Whelen Cantrol? How does this compare?
@SIRENNET8 жыл бұрын
We have... It's hard to compare them as there's a lot of details behind the scenes that separate them. As far as advancing what a Vehicle can do... their both absolutely incredible products.
@Guillotines_For_Globalists8 жыл бұрын
Some of this system depends on the driver side front window being opened, such as for the high beam override and panic button. What would the panic button be used for anyway?
@SIRENNET8 жыл бұрын
Its functions can be adjusted based on preference... Most commonly is would be used for alerting of an Officer in distress.
@helpthehurtlondon3 жыл бұрын
I just noticed the bus sitting outside the window. What was that doing there?
@dl39312 жыл бұрын
It's very cool set up but the blitz emergency door panel light switch thing is kinda silly
@SIRENNET2 жыл бұрын
While different than we're used to seeing where the Controller is the only way to active the warning lights and sirens, it's an example of how the system can be more creatively utilized in an emergency event.
@codyb00097 жыл бұрын
Now let's say an officer is putting a prisoner in the back can the light bar shut off on the side like it does in the front
@SIRENNET7 жыл бұрын
Sure can.
@devbloggs8 жыл бұрын
Does the BluePRINT control system tie into the door triggers, reverse, high beams etc using wiring or by using the CANBUS system?
@SIRENNET8 жыл бұрын
It ties in using added wiring if needed or it can tie into OEM triggers for grounding. If you can think of it... it can tie in and be used to perform a function most likely :)
@zboi7788 жыл бұрын
Can a different siren be used or different control panel be used instead of a Sound Off one? e.g. a Whelen Cencom siren and controller with the BluePrint interface to control lighting
@SIRENNET8 жыл бұрын
To maximize the BluePrint System, using an nERGY Controller will yield the best results... but with tweaking... it could be done.
@awd4g63ix8 жыл бұрын
Can this system be incorporated with any brand of light / light bar?
@SIRENNET8 жыл бұрын
It's designed primarily to work along with Soundoff's LED products for proper performance and controlling/programming abilities. If the Vehicle add a few LED items on it from the Dealership as options/road-ready... you'd could probably get them to work and interface with BluePRINT if the voltage is right.
@awd4g63ix8 жыл бұрын
Thank you for the reply and information!
@natedawg8097 жыл бұрын
How would someone control this if they're like DOT with an Amber sysyem or Volunteer FD/Medic with a courtesy lamp? Mainly asking as stated it's best used with nERGY siren controllers.
@SIRENNET7 жыл бұрын
Blue Print would allow for more advanced control over patterns, intensity and automatic functions like door triggers, park / drive mode. Wiring will be minimized when a large amount of accessorizing takes place.
@natedawg8097 жыл бұрын
SIRENNET but my Province banned siren controller in a POV. So is there another controller to use? Or connect to another controller like the Feniex 4200 since it doesn't have a siren amplifier, it's an add-on.
@SIRENNET7 жыл бұрын
Are you looking for all the features of Blueprint or do you just need a compact switching solution?
@natedawg8097 жыл бұрын
SIRENNET wouldn't mind all the features but can not have siren box inside a POV so can not use the nERGY controller to control the BluePRINT system..
@SIRENNET7 жыл бұрын
There unfortunately isn't a variance without siren amplification. You can of course skip a speaker, but the siren tones themselves will be built into the amplifier.
@daniellyons33986 жыл бұрын
How much would this set up cost
@SIRENNET6 жыл бұрын
Hi Daniel. For cost details, please contact our Sales Team at info@sirennet.com. Thank you.