Thank you so much for this very helpful video. I needed to resize my Tudor Pelagos LHD and within minutes following your instructions, it was done and back on my wrist, saving me over 2 hours travel to my nearest jewellers.

Thank you for making this video! I recently bought a one-year old TUDOR Black Bay GMT; and the jeweler gave me three extra links. He installed one link and set the TUDOR “micro-adjustment” to the largest of the three positions. This made the bracelet fit a tad too tightly by the late afternoon. I inserted one link into the bracelet; but, that made the bracelet too loose. Watching your video enabled me to understand how the “micro-adjustments” are made. Now I have a perfectly-fitting bracelet. Thanks!

Thanks for the tutorial. Bought a Black Bay this week and I needed to make some adjustment. Your video was very helpful.

Got my GMT today and this video was really helpful in making sure I sized it correctly without damaging it - thank you!

Hoboken Horology, thanks a bunch. I just went by your instructions and perfectly fitted my Tudor Black Bay Steel. Thanks so much for your help.

Hey, Just picked up one of these original 41mm. Its a tad large for my tiny wrist and like you said. Its awesome to see someone walk through the process even if you have a good idea. I never knew these were screws!!! That makes the whole thing alot easier!! Save me some money and a trip to the jewelry store.

Thanks! I just resized my "new-to-me" Tudor Black Bay Steel bracelet with your help!

Thanks so much! I've had my bb58 for 3 years now and never got the sizing right as I got fed up going back and forth to my jewelers. Now I'm confident enough to do it myself I've managed to get a perfect fit after a bit of trial and error. Thanks again!

Man youtube has literally everything you need. Bought a Black Bay chrono S&G recently spent $30 getting the bracelet adjusted but it was still a little lose (it is winter and watches/rings etc are loser than summer). Looking at micro adjustment but paranoid to try to figure out how to move, maybe needs a special tool?? A simple tooth pick and this great tutorial and now fits just that little snugger and more comfortable. THANK YOU Hoboken Horology. CHEERS and

Thank you. Very helpful. It gave me the confidence to size my new Tudor bracelet.

I used to live in Hoboken for 8-years. Anyways, thanks so much for this video- you just helped me resize my new Tudor BB Chrono (Panda). Had the confidence to do it myself. Thx bro.

Thank you. I’m considering buying my own watch tool kit to make these easy adjustments instead of taking to a jeweler. Cool stuff! Thank you for the demo....

Seriously helped me out man, thank you so much, I recently got a black bay 58 and I needed to size it ASAP, BIG HELP BROTHER!

Saved me a trip to the jewelers, thank you!

thank you so much for posting this! very informative

Nice video and I really appreciate the end comment about being able to help at least one person, awesome!

Thanks for your video it helped me confidently add a link to my black bay!

Thank you. Answered all my questions. I have a Ball Trainmaster coming my way.

Nice job. Thanks. Helped me with my BB58.

You‘be helped. Mission accomplished. Like the tape and the lose screwdriver. 👍

This helped a ton! Thank you

Thank you for a very helpful video.

Screw pins & push pins are pretty easy once you've done it a couple of times, split pins were ok for me to resize although you have to be more careful, rolled links a nightmare and WORST of all pin and collar rivit style bracelet half done on one now and already drawn blood three times.

Thx! Ive just adjusted the adjustment 😃. A little scratch on the screw but i have spme spare one 🤣

This really is quite easy. I used a 1mm tip jeweller's screwdriver. Make sure you push the screw through the link before you use it as this will tell you which end is which (one is threaded). One end is smaller than the other, the thread end is the smaller one. Don't over tighten, the screw should fit flush. Enjoy saving money over paying a jeweller to do this. It's a five minute job.

Very helpful, thank you 😉

Great job. Thank you.

Just bought a BB58 Navy. Slightly tight, this video is ideal, as bracelets look the same

Thanks heaps mate you saved me a hour round trip at least 👍

Perfect! Thank you!

Really useful - thanks

Thank you for this!

This helped me

Mate the toothpick tip was handy ! Thanks 😅

Why wouldnt you make the bracelet the same number of links each side , rather than the 12 'o'clock having more ? Thanks for your video

you great, thank you for the explnation!!!

Just got a Black Bay 41 today and it’s too big. Great advice about screwing a screw too far. My issue now is where to remove a link from? I’m thinking one from each side since it’s currently sized for a 7.75 inch wrist and I am a 7.25 inch wrist.

Nice one thanks

Is that possible also on a the new black bay chrono or can u use there only the microadjustment

what kind of tape do you use? isnt sticky residue bad? why is over tightening screw not good?

Does this apply to the Heritage Chrono bracelet as well?

Hi, may I know what is the screwdriver head size used in this video? Thanks!

Thanks!

Is it not a good idea to use a bit of Loctite? It is pretty easy for these screws to work loose after a while if not.

How large of a wrist does a black bay steel bracelet fit from factory? I couldn't find the answer just poking around on Google

Is that the faux rivet braclet

i couldn't open unopen the screw on the link, and actually think i may have damaged the screw itself.

What size is the screwdriver please??

What size is the screwdriver?

cheers dood

What's the size of this screwdriver?

Get the hollow T driver like the Panerai one...

What size screwdriver do people recommend for Tutor bracelets?

Youre wearing that watch on your hand. It should be behind the wrist bone

.... waffle... waffle... waffle...

Micro adjustments are not "on the fly". Also, the 6 o'clock side should always have more links than the 12 o'clock side. Keeps the clasp off a table top a little better. PLEASE, put a micro cloth on the blue block to prevent scratches on the bracelet.

Was better before take the link off use the micro adjustment

As if we need a video to work out this issue . Jeeeez how to wreck your screw head in one easy lesson.

Your wearing it on the bone….ulna

Oh dear, don’t waste your life watching, size of screwdriver not mentioned. Painful, sorry.

Top tips! Thank you very much...I have just fixed micro adjustment with tooth picks and bracelet with my computer screw drivers. You have owned a subscriber. Keep the nice work!