And you don't even need a plugin for any of this lol

*Only 18* 👇👇👇 992189.loveisreal.ru

I'm sure there is a way. Can you explain a little better what you want to achieve? If you wanted to start with a closed profile of the road and curve and have the path the road would take, you can used the Follow And Keep plugin to keep the road level along the path. You could also draw the road out straight and then use the Shape Bender plugin to conform it to a path. You could also use the plugin Flowify to conform a road to a prebuilt surface, but that one is a little tricky.

Thank you for the quick response. I've been in road construction before and I was in the planning department for more than two years. Drafting roadways in 2D has been a pain for me as you have to draw all the elevations of the same object, you know its a redundant task. One problem I have is with the clothoid, its a view of the road in straightened and stretched longitudinal elevation of the road (in AutoCAD). By the way, this custom elevation is used as reference to design super-elevations of two carriageways in a road and widening lengths for one carriageway (the lower side of the super-elevated road) of highways. If you don't know what I meant by superelevated, it is when a road kind of inclines to a small angle (your viewport in this one is perpendicular to the vertical plane or cross section view or front side elevation). Superelevations are in percent form and they range from -1.5% down to -8% and can go up to +8%. These are commonly used on highway roads. Superelevations are imposed everytime a straight road enters into a tangent to a circular curved state (your viewport this time is perpendicular to horizontal plane or top view). Widening is added to the lower curves from the two superelevated parallel curves (your viewport on this one is on the custom 'clothoid' elevation). Maximum widening of a 3.35 carriageway is 0.90 meters. When widenning is added, I think that the lower (inner) curve is no looks like it is parallel to the upper (outer) curve. What I saw in your model is that your road mesh conforms directly to the existing ground mesh. In road design, there are a lot of variables you have to consider to make it safe for a vehicle to traverse with. One particular is the vertical curvature of the center line of the road. If that vertical curvature is small, then it would make a bumpy ride for vehicles. And one other thing is the vertical sight distance that allows you to see coalition and those vehicles you are tailing (for safety purposes). And just by these factors, I say that the road mesh doesn't always conform the existing ground mesh especially when the mesh goes uphill and downhill. What happens is that either the roadway will have to cut a hill and make excavated slopes on either sides or make a hill and put sloping embankments on either sides, or a set with one of each type for each side of the road depending on the shape of the natural ground mesh. Please refer to this image: www.nativerevegetation.org/images/learn/fig_3_7.jpg I've made my peace with this task in AutoCAD before by presolving the coordinate points for each line segments in MSExcel, all I had to do is input the variables then copy and paste the cell containing all the coordinates to AutoCAD. But all those were 2D, I want to see and marvel at it on 3D. Haha! I had my share of frustration and fun programming those tables in Excel. I just don't know ruby yet. I'd appreciate it. Thank you.

Rod Templado Are you using ACad Civil 3D? Im pretty sure ther is a superelevation tool. There might be a way to use the excel data to generate a sketchup point cloud or TIN. If i could get the superevelation points mapped out in Sketchup, Im pretty sure I know a way to solve it into a 3D Mesh. It would still be tricky though. I did a video previously where I made a physics sim in sketchup of a marble rolling down a helical track and had to sort out the banking of the turns, however it was far from precise.

If you say so then I guess its really tricky. I have yet to improve my 3D spatial skills then. I haven't tried ACad Civil 3D yet. Although I've seen it work with my previous colleagues I thought that my current computer setup can't handle processing time of the software. I kind of have this mental disorder related to impatience. This is why I'm using Sketchup for its lite engine. I guess I'll just have to find ways myself. Intersecting perpendicular faces/meshes may just do the job. Highway roads heavily refers to its center line. I'll start there.

I'd be happy to put my brain to it as well when I have some time. If you want to email me an example from Autocad that you want to recreate in Sketchup, I'd enjoy the challenge. My email is clearstoryimaging at gmail dot com.

It's called Spot on the Mouse.

Thank you! And also thanks for this video, by the way! :)

Flipswix But drape messes up the texture. We are trying to work with clean quad based geometry.

Question: when you use BZ Plyline Segmentor to equalize the sides of the road, you no longer have a 'clean' connection to the adjacent 'grass.' Is it normal practice for you to just ignore the small gaps that are created or do you have a method that isn't described here to keep the geometry clean between the road (or curb) and adjacent surface?

+NewbVT I'm using the Thrupaint plugin from Fredosix. If you right click with the tool active, you can set it to tiling 1x1 and that will fit the texture to the surface. You can then adjust the scale in the individual X and Y directions if you are using the Quad Mesh UV mode.

+Winning With Sketchup Thanks...I have Thrupaint...which is new to me...but I still can't seem to figure out how to use the scaling that you are using...I understand the tiling 1x1 and the Quad Mesh UV mode....but I can't figure out how to access the scaling feature? In your video it looks like it just happens, but I don't know how to access that tool. I must be missing something. Otherwise this tutorial has been very helpful and came to me at the perfect time...I've succesfully gotten through all the other steps....and I subscribed to your channel today--looking forward to your other videos!

NewbVT Thank you. Once you have painted a surface with Thrupaint, it should have a yellow edge around it. If you are in Thrupaint and click on something that has already been painted (and has that yellow edge) it should bring up the scaling gizmo. It only becomes active if you click again after painting.

+Winning With Sketchup Many thanks I will try this out tomorrow.

+NewbVT Got it! It required a double click.

Can you help me with same.i tried doing it many times.

Yasser Moktar ZD Soft Screen record with a Blue Yeti mic.

just search for "road texture" in google

www.sketchuptextureclub.com/textures/architecture/roads

an anjar Curiloft from Fredosix