I got Sketch up to design the timber framing for a campervan. This tutorial showed m things that would have taken months to discover. Thanks from Australia.
@trueleyes4 жыл бұрын
You know Coach, you excused yourself for the video being a bit long BUT for us BEGINNERS we are hanging on each word and every movement you make and time for us FLYS. So I say for all the hot shots out there, be cool for at one time you were like us trying our best to understand programing language. OK? You, Coach, are doing a GREAT job helping us beginners. Thank You from all of us.
@ahmadsyauqi22373 жыл бұрын
Hello, I'm new here, from Malaysia.. And I find your tutorial video is the most useful, and the sound of your voice in the video is very clear and easy to understand. Thank you
@CPYOUKNOW3 жыл бұрын
I’ve used Sketchup for years to draw up projects but you’ve just made the projects so much easier- Thanks
@Thesketchupessentials3 жыл бұрын
Great to hear!
@iamjuliusalba4 жыл бұрын
I'm just starting SketchUp. I know nothing about this tool. Like literally nothing. After watching the Part 1 and Part 2, what I can say is ... You're awesome! Thanks a lot!
@mikeemery943310 ай бұрын
Great tutorials for a beginner. Really appreciate them
@iDesignMemoriesWP2 жыл бұрын
Excellent. I've watched several hours of sketchup tutorials (just getting started), and yours is by far the best I've seen. Look forward to watching more
@johnhewetson44063 жыл бұрын
I really appreciate these instructional video where I can mimic in a second window. Really helps to reinforce the process. The pace is awesome as I can always pause but it is more work to try and jump ahead when an instructor goes too slow. Thanks very much.
@doc17015 жыл бұрын
Great collection of tutorials. I enjoy the speed and content. I have my computer screens split so I can 'play along' trying to copy what you do, pausing if needed. Your easy explanations make them easy to follow. Thanks for taking the time to upload these videos.
@theVonThompsons7 жыл бұрын
i wish this video was available when I started using sketchup... a ton of info, very well explained and all in one place!
@Thesketchupessentials7 жыл бұрын
Thanks very much! Lol - a lot of my video creation process is trying to make the videos I wish I had when I started SketchUp! :)
@edwardsargent44324 жыл бұрын
TheSketchUpEssentials part 2
@frankcianci1029 Жыл бұрын
This is so helpful, thanks so much
@johnlykes66315 жыл бұрын
wow my mind is blown! the book shelf was amazing simple to create
@chrisgenovese81883 жыл бұрын
You legend! All the most necessary information to get going in less than an hour!
@Thesketchupessentials3 жыл бұрын
Everything you need, nothing you don't...😂
@andywest62504 жыл бұрын
Yes, you are moving fast for me, but I am 70 and new to SketchUp, drawing and woodworking; so I watch each video several times. Still great videos and I am slowly getting it..
@SkumSoundz2 жыл бұрын
Thanks a lot for these super informative tutorials. You're really easy to understand and follow along to. Best Sketchup channel I've come across. Cheers!
@teosinghsyiem94263 жыл бұрын
thank you sir. Awesome series for woodworkers !!!!!
@michaelchapman42696 жыл бұрын
Absolutely brilliant video, tried to have a go myself, got in a right mess, really starting to understand it now. Thanks so much.
@Thesketchupessentials6 жыл бұрын
Lol - glad it's helping! The first or second time you'll run into some issues, but the more that you practice, the easier it gets. Thanks for watching!
@stewartmatychuk81233 жыл бұрын
Awesome series. Made me excited to actually use Sketchup for woodworking!
@nadahamdi13 жыл бұрын
Very clear and comprehensive instructions. Thank you so much!
@Thesketchupessentials3 жыл бұрын
Glad it was helpful!
@mvred100 Жыл бұрын
Very good instruction. Love your content.
@Thesketchupessentials Жыл бұрын
Thank you!
@brandicampbell20016 жыл бұрын
I wish I had this video two years ago, I decided to give it another shot, trying to downsize time it takes to draw everything out, which takes a long time. Thank you for doing these videos! I could not figure out why everything was moving once i got it all set up, did not know about the group and component options. So thank you again!
@Thesketchupessentials6 жыл бұрын
Glad it helped! :)
@mickdamani95792 жыл бұрын
Amazing! Thank you for the free tutorials.
@saundersd19625 жыл бұрын
Your videos are brilliant, so easy to follow and very well explained. They’ve inspired me to give sketch up a try for designing my woodwork projects. Thank you and keep ‘em coming
@Thesketchupessentials5 жыл бұрын
Awesome - hope it goes well for you :) Let me know if you have any questions
@johnbredemere2995 жыл бұрын
Great video - clear instructions with great vocals - easy to follow - looking forward to more videos - thank you.
@TheJedc436 жыл бұрын
great communication skills....taking plenty of time to get your point across and showing many options to any feature...great job
@Thesketchupessentials6 жыл бұрын
Thanks very much! That's actually why I started the channel - I felt like there were a lot of videos that didn't really explain things very well, so I try to make each video as easy to follow as possible. Thanks for watching!
@popparock6506 Жыл бұрын
Thanks for this!
@DRAGONVIEW.CH-SwissParagliding4 жыл бұрын
I would explain the copy piece part and component should in Part1. The way you explain is fabulous!
@hawe6063 жыл бұрын
Wowza!! Thank you so much! These videos are excellent! I’m really excited about using the software now.
@fgriffintx6 жыл бұрын
Outstanding! This whole concept of groups and components was confusing to me, but you have cleared up a great deal! Don't worry about going too fast - a person can re-run the video multiple times; far better than plodding along! One stumbling block I have had is how to move two objects together so that their faces end up coplanar. I am sure there is a simple trick, but haven't hit on it yet.
@Thesketchupessentials6 жыл бұрын
Usually your best bet to get objects coplanar is to use inferencing - move objects along on the the axes and hold the shift key to lock to those axes. Then you can just mouse over the object you're trying to align. Hope that made a bit of sense. Thanks!
@lionelhatch1436 жыл бұрын
Enjoying the way you are explaining how to use this product. Thanks.
@Thesketchupessentials6 жыл бұрын
Thank you very much!
@antgarciam4 жыл бұрын
Great tutorial. Thank you
@Thesketchupessentials4 жыл бұрын
Thanks!
@Alban.B.Zimmert2 жыл бұрын
Great Tutorial
@Bill08455 жыл бұрын
Thank you for your video. I used Sketchup a while back, but I have forgotten almost everything. You explain everything thoroughly and understandably. I look forward to viewing more of your videos
@Thesketchupessentials5 жыл бұрын
Thanks Bill - glad you're finding it helpful!
@BradRemillard5 жыл бұрын
Good job. Very helpful for beginner. Use of tools is always something difficult for beginner. Did great job.
@Thesketchupessentials5 жыл бұрын
Thanks - glad you liked it! :)
@Italianfoodtours4 жыл бұрын
great video series!! very helfull. 10X a lot
@christopherjames51925 жыл бұрын
incredibly helpful for a beginner woodworker/designer
@Thesketchupessentials5 жыл бұрын
Awesome - really glad you found it helpful!
@MadMonk675 жыл бұрын
Fantastic video. I've learned more in 24 minutes that I have stumbling through it on my own over the past two days. Thank you!
@Thesketchupessentials5 жыл бұрын
Cool - glad it helped!
@PauloGomes-mi7dd2 жыл бұрын
Greate help for me. I'm loving it. Move forward... :)
@GKChandlerBooks5 жыл бұрын
You have an excellent presentation style. Thanks for taking the time to make your videos. Sketchup is starting to make a whole lot more sense, very quickly.
@Thesketchupessentials5 жыл бұрын
Thanks very much - really glad you're finding the videos helpful!
@ChinhNguyen-yb3cp3 жыл бұрын
Thank you so much for teaching.
@Theunjustsanctuary6 жыл бұрын
Thank you so much! My dad has been trying to get me into woodworking with this program and you have honestly made it easy. I appreciate you putting the effort and time into these videos and explaining everything at a very understandable pace. Keep up the great work my friend.
@Thesketchupessentials6 жыл бұрын
Very cool - glad I could make the process easier for you!
@dariode70 Жыл бұрын
Awesome!!!
@ryanjohnson3445 жыл бұрын
That was awesome! 👍 You just made my life soo much easier by explaining how to use Outliner, groups & components in a way that just makes sense. Other beginner videos I've watched have mentioned groups & components but never in a way that clicked! 😁 Thanks for sharing!
@Thesketchupessentials5 жыл бұрын
Awesome - really glad it helped!
@brad2652 жыл бұрын
This is awesome
@donaldlabrie60024 жыл бұрын
lots more info than what I've seen in other tutorials learning more about the power of sketchup thanks
@johnschweitzer84386 жыл бұрын
Perfect. Just the right level of detail and explanation.
@Thesketchupessentials6 жыл бұрын
Thanks very much John - glad you liked it!
@WojciechToJa4 жыл бұрын
Making groups and components, that's what i came here for, great tutorial!
@dclark0696 жыл бұрын
Extremely well presented!
@Thesketchupessentials6 жыл бұрын
Thanks Donald!
@stevejaszek36526 жыл бұрын
This is a wonderful video. Bery easy to understand. Kudos. Thanks so much.
@Thesketchupessentials6 жыл бұрын
Thanks Steve - I appreciate it!
@Simonfrios5 жыл бұрын
Thanks so much! I'm learning SketchUp in between visits to the shop and your videos are fantastic.
@Thesketchupessentials5 жыл бұрын
Thanks very much - glad you're finding them helpful!
@bobwadsworth93405 жыл бұрын
Very good video. Not so much about woodworking per se until the end but you gave a lot of needed basic fundamentals. I am a hobby-ist woodworker and I make a lot of things in my head, along with a rough drawing on graph paper and subsequently I make a lot of mistakes. I want to learn SketchUp so I can do a better job of creating plans before I cut that first piece of wood. Like I just made a flag case and I based it off of 3 different plans. So I want to make SketchUp plans so if I am asked in 2-3 months or so to make another one, I will have detailed plans to go on. I know, boring and TMI for a comment. In other words, this is providing me with a great foundation. Thank you and I will be watching more of your videos.
@Thesketchupessentials5 жыл бұрын
Lol - that's the trick with woodworking starter SketchUp videos - they're not really that different from other videos in that we still have to cover the basics. Thanks a lot for the comment - I appreciate it!
@ytsejam20076 жыл бұрын
Thanks so much for your run-through of the different tools in Sketchup. Wish I had known these "tricks" before starting ;) ... could have saved me a few hours of toddling! Now I'm destined to go through your other vids and learn more :) In my oppinion your speed showing stuff is perfect! Cheers, Jan (Denmark)
@Thesketchupessentials6 жыл бұрын
Lol - I try to make sure to emphasize the things that will save a lot of time, because I feel the same way! Thanks for watching!
@Sludgepump5 жыл бұрын
Jason, this is such a handy video. Your explanations are excellent. Thanks!
@Thesketchupessentials5 жыл бұрын
👍
@alanains4 жыл бұрын
Only downloaded sketchup today really useful info Many Thanks
@Thesketchupessentials4 жыл бұрын
Thank you!
@JeffreyBrantEyeMD3 жыл бұрын
Excellent! Thanks!
@kaveiceman5 жыл бұрын
Awesome video. Perfect speed - can allows go back and re-watch. Thanks
@Thesketchupessentials5 жыл бұрын
Glad it helps!
@margyjr4 жыл бұрын
Great Video! it help me so-much as I am first time Sketchup user, especially using Groups and Components, Thank you 😊
@bethanymcdaniel17186 жыл бұрын
Nice presentation, very thorough explanations w/o getting overly detailed. Keep them coming.
@Thesketchupessentials6 жыл бұрын
Thanks very much - glad you found it helpful!
@kennethpassey86075 жыл бұрын
very well done...these videos help alot thanks
@troycleveland5 жыл бұрын
Great series of vids man. I am learning sketchup now simply because I am becoming more and more of a believer in computerizing everything. It is making my life easier in terms of cleanliness and organization. The question that I have is if I wanted to create a starburst table top, I could make say, a 16 sided cylinder. Can I show the center of the top face and have lines automatically drawn to the center from each outside face of that cylinder?
@westr705 жыл бұрын
excellent tutorial. Keep them coming.
@jeremyangel57744 жыл бұрын
Best Sketchup videos, Thanks for making them
@Thesketchupessentials4 жыл бұрын
Thank you!
@Ceorolus4 жыл бұрын
So far, I've followed you through successfully.
@Thesketchupessentials4 жыл бұрын
Glad you've found it helpful!
@traiecto5 жыл бұрын
Great, just what you need to know to start working!
@Thesketchupessentials5 жыл бұрын
👍
@liviumihai864 жыл бұрын
Dude... you are amazing!!!!
@Thesketchupessentials4 жыл бұрын
Glad you liked it!
@tubepassyou3 жыл бұрын
great video - really helps understanding how to use prog faster and better, without months of learning. your are a very good teacher. my question, for this vid _ can you preset thickness of wood for an entire project -file? and how would you approach adding detail for manufacturing, ie: rabbits, dados, half laps etc etc
@yudis526 жыл бұрын
Thanks again Justin. I can easily understand every details on your instruction. Now I'm gradually improved my skill, from zero. I just start learning sketchup since 3 days ago :) :). Greetings from Malang, Indonesia :) :) :)
@Thesketchupessentials6 жыл бұрын
Hi there! Glad you're finding the videos helpful! :)
@bryanjordan34936 жыл бұрын
This is incredible. Thanks so much and keep the videos coming!
@Thesketchupessentials6 жыл бұрын
Thanks Bryan - glad you liked it!
@leandersmith61844 жыл бұрын
Thanks again great explanation. Keep up the good work
@azpg135 жыл бұрын
this video is very helpful many thanks to you.
@Thesketchupessentials5 жыл бұрын
Thanks - glad it helped!
@sammysodapop4 жыл бұрын
Well done video, thanks for introducing me to the outliner tool
@Thesketchupessentials4 жыл бұрын
Thanks - glad you liked it!
@davidwiseley6336 жыл бұрын
Well done for what you did. I was hoping to see more complex joinery, inset backs, dado shelves, and the construction joints found on better cabinetry. But you always do a good job of giving clear instructions and as I said, you did a great job , but not what I was looking for. Thanks
@Thesketchupessentials6 жыл бұрын
Lol - well to be fair, this tutorial wasn't about joints - try this one (kzfaq.info/get/bejne/eMp4qat_3Zjcgpc.html), though I'm not sure I covered every joint you're looking for. Thanks!
@gurbur7114 жыл бұрын
Thanks for the video!
@wilsonfineart5 жыл бұрын
Very useful!
@jessewheeler52375 жыл бұрын
I think some tips on moving the camera: rotating, panning, zooming, etc would have really helped. You move around very proficiently and I want to be just like you! Thanks.
@GKChandlerBooks5 жыл бұрын
I had the same issue, but found the O (orbit) and H (pan) tools to change camera view. Then space to reset to the pointer. Would have been handy to know this earlier. I'm sure there are other good tricks too.
@GKChandlerBooks5 жыл бұрын
I should also have mentioned that holding down the middle mouse button also activates orbit function, then release to deactivate. This is the quickest way to change camera position without using the keyboard.
@liamcunningham73244 жыл бұрын
Thank you so much for these tutorials!!
@Thesketchupessentials4 жыл бұрын
Thanks for watching!
@dennisleazott7184 жыл бұрын
speed is fine. I like the pace. I just open a file and stop your lesson to try each new feature as I go. Helps retain the lesson.
@Thesketchupessentials4 жыл бұрын
Thanks - glad you liked it!
@duncanholmes27105 жыл бұрын
Great intro tutorials, easy to follow and well explained. Iv just started using SketchUp to help visualise my designs and get a little more creative, subscribed to your channel, cant wait to learn more, keep up the good work 👍🏻
@Thesketchupessentials5 жыл бұрын
Really glad you're liking them - thanks!
@luke98222 жыл бұрын
6:24 what is the advantage to making the object a *group* vs making it a *component* ?
@MB-zj3er4 жыл бұрын
Very helpful, thank you.
@cabost92853 жыл бұрын
best !
@ScubaDaveCCR6 жыл бұрын
Perfectly Taught🙌🏻 Thank You!
@Thesketchupessentials6 жыл бұрын
Thanks David!
@zotastevens17712 жыл бұрын
thanks for the tutorial. I try doing the last part, but I could not see the rectangle. i am using the 2021 pro
@dangatto86664 жыл бұрын
I make model cars (out of wood). It would be helpful to create the model in sketch-up before I make it. I am a beginner and watched a lot of beginner videos. None of them, so far, deal with adding a curved line to a flat box, counter sinking holes, edge rounding and 45 degreeing. like your videos. will keep searching.
@josephkotlar51846 жыл бұрын
Very helpful info in this video. Thanks!
@Thesketchupessentials6 жыл бұрын
Thanks Joe - Glad you liked it!
@jessedillon38325 жыл бұрын
very very helpful!
@Thesketchupessentials5 жыл бұрын
Thanks - glad you liked it!
@dantco4 жыл бұрын
Good stuff! Love the tutorial.
@Thesketchupessentials4 жыл бұрын
Thanks - glad you liked it!
@caddy676 жыл бұрын
Really great tutorial!!! Thank you
@Thesketchupessentials6 жыл бұрын
Glad you liked it!
@MrDjenkinsone5 жыл бұрын
Thanks a lot.
@Thesketchupessentials5 жыл бұрын
👍
@richardc.43483 жыл бұрын
appreciate this awesome content, liked & subbed!
@Thesketchupessentials3 жыл бұрын
Glad you liked it!
@robertcaldas95744 жыл бұрын
Love the vids...seem to get lost in my projects when they get more detail...unsure what the different reference points ( on edge, on face, endpoint etc) mean when referencing a new object. Think I need a sketch up command basic video....Sometimes I don't know how to tell Sketch op which plane I want to move in or build in.
@dickiedester2 жыл бұрын
First time user, loved your clear video, thanks! I want to make Apple boxes for photostudio work and need a simple plan on laying out the dimensions for the each face to maximise the plywood sheets - do you have a plan or template for this?
@JackJohnson-tw2es2 жыл бұрын
do you have a you tube for making shop cabinets?
@15kstudios6 жыл бұрын
Thank you for this!
@Thesketchupessentials6 жыл бұрын
Thanks for watching!
@c0nstancy8796 жыл бұрын
Great vid man! Thanks!!
@Thesketchupessentials6 жыл бұрын
Thanks - glad you liked it!
@RobiulIslam-ix7ox4 жыл бұрын
Nc work sir.
@Thesketchupessentials4 жыл бұрын
Thank you!
@chazbandy54416 жыл бұрын
great video
@Thesketchupessentials6 жыл бұрын
Thanks Chaz!
@mckinnon4217 жыл бұрын
Nice tutorial
@Thesketchupessentials7 жыл бұрын
Thanks Duncan!
@soufianehadj54924 жыл бұрын
thank u bro !
@petergibson84764 жыл бұрын
how do you type in divide by when making components?