No video
SKID PLATE / SABOT YAMAHA TENERE 700 WORLD RAID - AXP RACING
Рет қаралды 7,979
Күн бұрынVF disponible ci-dessous
Product : www.axp-racing...
Adventure skid plate Tenere 700 World Raid - Weight : 3.1Kg . This bash plate protects the frame tubes, the linkage, the side stand sensor and the cases by following the bike lines. Its design made of High Density PolyEthylen plastic 8mm thick provides a reinforced protection by being 30-40% lighter than a similar product made of alloy. Contrary to aluminium bash plates, HDPE reduces a lot the noise of rock impacting the plate, does not generate any vibrations and does not undergo deformation. We made it for a pleasant use and an easier maintenance ! This skid plate is not compatible with the after market crash bars ( it will require some modifications ). The after market center stands will fit but some cuts at the rear of the skid plate will be necessary. It fits only Yamaha Tenere 700 World Raid.
_____________________________
Lien site: www.axp-racing...
Sabot moteur Ténéré 700 World Raid - Poids : 3.1Kg . Protège le châssis, la biellette, le capteur de béquille latérale et les carters tout en suivant les lignes de la moto. Sa conception en plastique polyéthylène haute densité d’épaisseur 8mm procure une protection renforcée tout en étant de 30 à 40% plus léger que l’aluminium pour un produit similaire. Contrairement aux sabots alu, le PEHD réduit de façon conséquence le bruit des impacts, ne génère pas de vibrations et ne subit pas les déformations, on en a fait un usage plus agréable et une maintenance facilitée ! Ce sabot n’est pas compatible avec les crash-bars du marché (des modifications seront nécessaires). Les béquilles centrales peuvent se monter mais nécessiteront de petites découpes sur la partie arrière du sabot. Montage valable sur Yamaha Ténéré 700 World Raid uniquement !
Facebook : / axpracing
Instagram : / axpracing
Contact : contact@axpracing.com
#axpracing #skidplate #axp #sabot #visitwebsite #protection #development
@jeffromoto874 Жыл бұрын
I have AXP skid plates on 3 bikes. 2 enduro and now my 2022 tenere 700 base model. Love em. Man they take a beating and lighter than metal
@axpracing Жыл бұрын
happy to read it Jeff ! thanks for your loyalty to AXP products !
@joaofiliperodrigues853 Жыл бұрын
Et oui on a testé et approuvé
@DINOS-ys8br Жыл бұрын
Just perfect😉👍👍👍👍👍
@axpracing Жыл бұрын
Thank you so much !
@KevinGallas Жыл бұрын
Would like to test it on my next video Project! I think the material is working a lot better than aluminum! 🤝
@axpracing Жыл бұрын
feel free to write us at x.dugardin@axpracing.com and give more information about your project ;)
@Roman-cw7er Жыл бұрын
Très bon sabot moteur mais préparé vous a découper et lime les coter et le support a l'avant du sabot car sa ne passe pas avec protection de radiateur et crash bar, malheureusement je trouve qu'il faut quand même bien découper pour un sabot a plus de 300e, mais sinon c'est du solide et ne compter pas sur le sav pour avoir des explications 2 mail envoyer plus 1 formulaire remplie sur les site sans réponse de leur part.
@axpracing Жыл бұрын
Via ce lien: www.axp-racing.com/fr/product/sabot-yamaha-tenere-700-world-raid-2022-2023-noir-ax1634 , il est clairement précisé que le sabot n'est pas compatible avec les crash bars du marché et que des découpes seront nécessaires. Il nous est simplement impossible de nous fournir touts les modèles existants, les monter et rendre compatible le sabot . En ce qui concerne le délai de réponse, la personne chargée de l'aspect technique prend parfois des congés, ce qui fut le cas la semaine ou vous avez écrit.
@Ben_a_moto Жыл бұрын
Salut Roman, Je suis en pleine réflexion de l'acquisition d'un T7 WR. J'ai bien regardé aussi et je ne trouve pas de crash bar compatible avec le AXP pourtant c'est celui qui offre le plus de protection. Les modifications sont elles si difficiles ? quel a été votre choix pour les crash-bars ? Merci
@paschalmullins3360 Жыл бұрын
very nice design, how come it wont fit a standard model? 🤔
@axpracing Жыл бұрын
it can fit on a standard T700 cause the front fixation points are only present on the world raid :/ sorry
@avec-zam7301 2 ай бұрын
Bonjour, je suis très intéressé dans votre skidplate pour un voyage off-Road Maroc. Je suis entrain de monter une Tenere 700 world rally pour se voyage et je veut votre skid plate pour ca reputation, mais aussi les crash bar de chez outback motortek? Du coup vous parle d’un ajustage mais vous avez une idee plan ou autre ou voir meme une possibilité de l’acheter directement avec cette modification? Merci a vous et continuez comca!
@axpracing 2 ай бұрын
Merci pour votre message, vous pouvez envoyer un mail directement à Xavier pour qu'il vous fasse parvenir toutes les informations à contact@axpracing.com Merci!
@bertyboy7126 Жыл бұрын
it would be nice if i could buy this in uk , the uk is not even listed on there site
@axpracing Жыл бұрын
you will find it at WRENCH RIDE in UK or you can send us an e-mail, we'll give you a solution. One of our tester was from UK :) x.dugardin@axpracing.com
@thomasbinder5288 6 ай бұрын
Its fits in combination with the sw motech Sturzbűgel for the world raid without Modifikation ?!
@axpracing 6 ай бұрын
Hello, No, this skid plate is not compatible with SW Motech crash bars without modifications.
@kalpetkoff Жыл бұрын
I just ordered the plate. I'm sure I will love it. Question: What crash bars fit best with AXP skid plate? I don't want be cutting the plate to fit the crash bars. Thanks!
@axpracing Жыл бұрын
As mentionned on our website, there is no crash bars compatible without modifications. The easier option are the Hepco and Becker meaning only small cut but this is a customer testimony, we didn't experienced ourselves
@kalpetkoff 11 ай бұрын
@@axpracing is there a way to replace the front support bracket with some tinner one? Most crash bars a mounted on the same points. :/
@axpracing 11 ай бұрын
@@kalpetkoff Hi, We recently found a model that seems to be compatible with our skid plate (www.motea.com/fr/pare-carter-compatible-avec-yamaha-tenere-700-world-raid-22-23-motoguard-garde-moteur-hg15-a563287-0) as it does not use the same mounting points as us. Then, we don’t plan to modify the front fixation. Some of our clients did a small cut in the skid plate to fit the crash bars and they reduced a bit the thickness of the fixation on the sides. Hope this will be helpful! Thanks.
@kalpetkoff 11 ай бұрын
@@axpracing thanks a lot!
@kalpetkoff 11 ай бұрын
@@axpracing I just bought it. And the price is great. Today I rode for first time with the AXP bash plate. I love it! No more bell sounds from stones on my bash plate. Thanks a lot guys!
@HNNNGGG12 3 ай бұрын
Can confirm, nothing fits. cross threaded one of the front mounting points on the bike trying to fit this garbade. If you want a bash plate look elswhere.
@davidecarnovali7462 Жыл бұрын
Hello, why It doesn t cover the water pump like the One for the standard t7?
@axpracing Жыл бұрын
it has been asked from customers to give a "rally" design and so we did. Adding the water pump protection would have complicated the design
@alvaroalvarado3398 Жыл бұрын
Is this compatible with the heed bunker crash bars?
@axpracing Жыл бұрын
do you have a link for us to check please ?
@pmeixi315 Жыл бұрын
Will this fit with OEM Yamaha crash bars?
@axpracing Жыл бұрын
no, too much modifications to bring and no perfect result so not compatible sorry
@CarlosBiker93 9 ай бұрын
Its compatibile with Crashbar swmotech?
@axpracing 9 ай бұрын
Hello, No they are not but there are some possible modifications to make them fit: a cut on each side of the plate to pass the tubes and file the front fixation in plastique to have a correct adjustment with SW Motech spacers. These are the modifications some of our clients did but we did not do it ourselves so we cannot guarantee anything. Thanks!
@CarlosBiker93 9 ай бұрын
@@axpracing oh thanks a lot for reply. I really like your product. I Will looking into It
@miguelmoran1450 Жыл бұрын
Are there some compatible crashbars with this skid plate? OEM, Crosspro, Se, Hepco or other? Thanks!!!
@axpracing Жыл бұрын
Actualy, I think there's no compatibility without modification for this design, sorry ..
@capitalfagulhaenduro Жыл бұрын
can i install this model in the normal tenere??
@axpracing Жыл бұрын
No, you can't but we have a skid plate for the normal tenere here : EURO 4 : www.axp-racing.com/en/product/yamaha-700-tenere-skid-plate-euro4-2019-2021-black-ax1564 or EURO 5: www.axp-racing.com/en/product/yamaha-700-tenere-skid-plate-euro-5-2021-2023-black-ax1606
@miguelmoran1450 Жыл бұрын
It's compatible with center stand?
@axpracing Жыл бұрын
We can't test all after market center stands and the linkage guard may interfere with soem of it. We just know customers who have fitted the SW Motech and the Yamaha ones fits as well with a small cut in the plastic plate. Hope to answer a minimum to your question :)
@miguelmoran1450 Жыл бұрын
Sorry i asked for OEM center stand. Thanks
@axpracing Жыл бұрын
@@miguelmoran1450 so at maximum, only small cut for the first installation
@leandrooliveira8307 3 ай бұрын
Nice piece, just a little ugly design why you dont do full close in the horn position? Looks bad that detail
orbsurfer
Рет қаралды 20 М.
Pirate Racing
Рет қаралды 18 М.
Huskydrive
Рет қаралды 190 М.
Outback Motortek
Рет қаралды 4,7 М.
SLRVIE
Рет қаралды 100 М.