SKIDOO SUMMIT GAUGE CLUSTER FAILURE | Not a big deal, easy fix!

No video

SKIDOO SUMMIT GAUGE CLUSTER FAILURE | Not a big deal, easy fix!

Рет қаралды 9,959

Күн бұрын

After our epic ride on the mountain, the skidoo summit had a gauge cluster failure. Lucky for us, it was not a bed deal and ended up being a very easy fix. Check it out and hopefully your issues are similar so you can get back on the mountain.
Thanks for watching, if you enjoyed the video give it a like and please subscribe to the channel! Share it with your friends and we will see you in the next one!!!
---Special thank you to my partners for this season!---
CastleX - castlesales.com
Oxbow Gear - oxbowgear.com
GGB Exhaust - ggbexhaust.com
---Must have Reading Material!!---
The Four Stroke Dirt Bike Engine Building Handbook: amzn.to/2Y7NvL5
The Two Stroke Dirt Bike Engine Building Handbook: amzn.to/39QlE4e
⬇️ As always the links to the tools, parts, and equipment I use are listed below! ⬇️
-----GoPro Mount-----
∙Dango Design Gripper Mount: amzn.to/36ytQEk
-----Check out my Camera Gear-----
∙Canon EOS M50 Mirrorless Camera: amzn.to/3r2vLus
∙Drone: DJI Mavic Min 2: amzn.to/3wti9cF
∙Rode VideoMic On-Camera Microphone: amzn.to/3ARmDgM
∙Joby Handypod Mini Tripod and Handgrip for DSLR: amzn.to/3xxIyYo
∙Joby Gorillapod 3K Pro Kit: amzn.to/3hvIBhC
∙GoPro Hero 7 Black Edition: amzn.to/3ww0LnB
∙K&F Concept DSLR Camera Tripod: amzn.to/3wz7ldg
∙FeiyuTech G6 Max 3-Axis Handheld Gimbal Stabilizer: amzn.to/3AQCps5
∙Canon EF-M 11-22mm f/4-5.6 STM Lens: amzn.to/3wtirQN
*Disclamier - As an Amazon Associate I earn from qualifying purchases.*
-----Join me on Social Media-----
Instagram: / danmx2112
#danmx #skidoo #skidoogaugecluster

Пікірлер: 24

@mattf9248 4 ай бұрын

I just picked up a 2014 for a thousand dollars that has same issue. Guy was tired of messing with it so I took a risk seeing the cracked lenses that it was going to be a easier fix and worse case I end buying a new cluster. Your video gave me some insight on getting it off and fixing it myself. Thank you.

@DanMX2112 4 ай бұрын

Good deal, I figured it would be a more common issue than not. Thanks for watching and I hope the videos continue to help you further Matt.

@mattf9248 4 ай бұрын

My son and I pulled the cluster out last night and there wasn’t a little moisture, there was standing water. Soaked it in a bag of rice for 5 hours and it plugged it back in, working perfectly. Ordered a replacement lens cover as the one on it was cracked pretty good. Thanks again for your video,

@DanMX2112 4 ай бұрын

@mattf9248 success my friend, dang that makes me happy!

@williamtarr9758 23 күн бұрын

I just fixed mine as well thanks for the vid man ya save me lots of money

@DanMX2112 23 күн бұрын

I didn’t think this video would catch traction, but I’m pumped you and others have found it helpful! Thanks man!

@williamtarr9758 22 күн бұрын

@DanMX2112 thanks again man

@benschroeder1161 Жыл бұрын

The SeaDoo gauges… you have to cut the board out from the back it’s glued in. Surprised SkiDoo doesn’t do that since snow is frozen water and will turn back into water once inside or it warms up

@DanMX2112 Жыл бұрын

I agree, I was surprised when it came apart so easy with only a gasket in between the lense and body. The new lense fixed the issue but still, when will it happen again? Idk.

@larsrehner7506 Жыл бұрын

Is that an index finger throttle? I’m not a big thumb throttle fan

@DanMX2112 Жыл бұрын

Yes and it is amazing! You won’t look back.

@tytheflippenguy8543 7 ай бұрын

Hey man idk if you’ll see this but. I have a 2014 ski doo summit 800. Kinda the same issue with mine. My gauge only works when I sit there and hold the plug in super tight. But as soon as I let go I lose connection. What do you think the problem is there?

@DanMX2112 7 ай бұрын

Sounds for sure like a connection issue. Add a small bit of dielectric grease to the terminals and that should clean up the connection. If not, it could be water inside the gauge assembly that is causing the connection to seem to be the issue but once pressure is applied it works. Who knows.

@simonchurat7540 Жыл бұрын

I have a 2009 summit x wich the cluster looks almost the same just without the orange trimmings, my guages works with no problems but my display has black spots as if the leds behid has burnt you could still see that something on the display is moving but you cant make up what anythi mg says. Do you think newer clusters would fit from like a 2013? Or am i having to go full operation on this

@DanMX2112 Жыл бұрын

I’m almost positive the 13 and newer won’t work on the rev. Idk, you may look up on the forums like dootalk and see if you can find anything. Gauge maintenance and replacement is hard to find online.

@Albin0stman Жыл бұрын

Where did you buy the cracked plastic part

@DanMX2112 Жыл бұрын

Skidoo parts nation, google it. Fast shipping too.

@Albin0stman Жыл бұрын

@@DanMX2112 thanks

@WyteOutAK 8 ай бұрын

Is it possible to change the light color?

@DanMX2112 8 ай бұрын

Don’t think so, but that would be awesome!

@WyteOutAK 8 ай бұрын

@@DanMX2112 yes it would I been looking for any videos, can’t find anything.

@josephrossman1600 8 ай бұрын

There’s Optical light pipes on the back, mounted In front of the backlight LED’s. If you have any SMD soldering skills it’s easy to replace it with any color you want. Just need to order the LED you want.

@WyteOutAK 8 ай бұрын

@@josephrossman1600 that’s cool. Is there a video you can make? About doing that?