Skinny Tumblers in the Cricut Mug Press with Inserts

Рет қаралды 149,933

Күн бұрын

Y'all have been asking for me to do skinny tumblers in the Cricut Mug Press and today is the day! I finally figured out a method that I feel works well. Grab these inserts for the Cricut Mug Press to open up the range of sublimation blanks that you can do in this machine. You can now do skinny tumblers, camping mugs, and more. The inserts have three sizes and allow you to make mugs and tumblers in smaller sizes right in your mug press with sublimation. And yes, I am doing a full wrap skinny tumbler in the Cricut Mug Press! Watch to see how!
Join us at Sublimation Camp May 12 - 14, 2022! Get your free ticket here: sublimationcamp.com/
Links below may be affiliate links.
Supplies used:
PYD Life Inserts amzn.to/3kQcYAl
Cricut Mug Press www.thecountrychiccottage.net...
Sublimation printer • Converting an Epson Ec...
Sublimation ink amzn.to/3FCKRNJ
Sublimation paper amzn.to/3gZCaCx
Infusible Ink www.thecountrychiccottage.net...
Lint Roller amzn.to/325oT3F
Heat Resistant Tape www.thecountrychiccottage.net... Use code CCC10 for 10% off
Artesprix Protective Paper www.thecountrychiccottage.net... Use code CCC10 for 10% off!
Heat Resistant Mat www.thecountrychiccottage.net... Use code CCC10 for 10% off!
Heat resistant gloves amzn.to/3bfvjm8
Tape dispenser amzn.to/3siUWuu
Blanks used:
20 oz skinny tumblers amzn.to/3KLsnw9
Steel cup amzn.to/3kS9H3e
Tall can cooler www.thecountrychiccottage.net...
White camping mug www.thecountrychiccottage.net...
Stainless mug shrsl.com/a8yo-1x44-keolus_1-1
Designs used:
Watermelon Tumbler www.creativefabrica.com/produ...
Explore More www.creativefabrica.com/produ...
Rainbow Paper www.creativefabrica.com/produ...
Other videos you may enjoy:
More Tumblers in the Cricut Mug Press • Cricut Mug Press: Mugs...
Glass mugs in the Cricut Mug Press • Glass Mugs in the Cric...
Tumbler Press Review • How to Use a Tumbler P...
Be sure to follow me on social as well!
Instagram / countrychiccottage
Facebook / countrychiccottage
Cricut Facebook group / cricutlove
TikTok / countrychiccottage
Sign up for our free sublimation class here: lingering-pine-4030.ck.page/6...
Join my sublimation Facebook group here: / sublimationmadesimple
#cricutmugpress #tumblersinmugpress #skinnytumblers
0:00 Introduction
0:39 PYD Life Inserts
1:53 Supplies needed
2:56 How to use inserts
5:09 Blanks used
5:52 Prepping blanks
8:26 Pressing 20 oz skinny tumbler
11:24 Tumbler results
16:11 Pressing small mugs
17:16 Mug results
18:15 Sublimation Camp info
18:53 Glass tumblers and mugs
19:26 Infusible Ink considerations
20:04 Tips and tricks
21:57 Wrap up

Пікірлер: 283

@Jemmyjo Жыл бұрын

Thanks for showing us the mistakes too. You watch all these videos and when you mess everything up the first time you try, and you watch all of these perfect videos (which I know they don’t always go perfect “, you start to feel like you can’t do anything right! In reality, it does take some mistakes to perfect these things! I have lightened up a lot! I appreciate your videos, a lot!

@AngieHolden Жыл бұрын

Thanks for watching!

@gerryannbrown9645 2 жыл бұрын

Thanks, Angie, Great solutions for them using different size items. Have a great day!

@ritawhite596 2 жыл бұрын

Thank you for this simple fix. Can't wait to try

@mandylevasseur3807 2 жыл бұрын

I honestly don’t know what I would do without your videos. 🥰 your a true crafting guru

@AngieHolden 2 жыл бұрын

Thank you!

@melissahanson6003 Жыл бұрын

Thank you! I have been looking for a hack for my Cricut Mug Press with skinny tumblers!

@carolpratte17 2 жыл бұрын

Thank you!! I followed your process and my skinny tumblers turned out amazing!!! I'm so excited to finally know how to make beautiful tumblers using my Cricut Mug Press.

@AngieHolden 2 жыл бұрын

YAY!! So happy to hear that!!

@sheilawiard2077 2 жыл бұрын

Thank you for finding a solution to be able to due different sizes of blanks in the mug press. I think Cricut missed the bar by making this heat press for only certain height blanks. I would love to see them make a larger press to do the full tumbler without having to turn it over. Moving forward with this method, I will certainly follow your instructions!!

@AngieHolden 2 жыл бұрын

I would definitely love a taller press from them!

@maryjanewill3056 2 жыл бұрын

Great video, 👍

@notimetowork Жыл бұрын

You're amazing, you always have such great ideas!

@brittanyyoung7715 2 жыл бұрын

I LITERALLY asked this question on Facebook and looked for a video about this YESTERDAY. You truly are my favorite and thank you for listening to the crafting Gods because I needed this

@AngieHolden 2 жыл бұрын

I have been trying for what seems like FOREVER but I think I am finally happy with this!

@ShelleyCordes Жыл бұрын

Thanks for the insert link for the skinny mugs! I am a new member. Can't wait for more videos. Thanks😁

@Rayansway2015 Жыл бұрын

I only just came across your channel, but I like how thorough you are in explaining things clearly. Definitely subscribing.

@thePhxPrincess1 2 жыл бұрын

Great tips and mine turned out beautiful. Your instructions were perfect to follow. Thank you for the assist!

@AngieHolden 2 жыл бұрын

Glad it was helpful!

@raenicole9519 2 жыл бұрын

I was hoping you would do a video on this and you did not disappoint! Thank you!!!!!

@AngieHolden 2 жыл бұрын

You are very welcome!

@Lzamora1 2 жыл бұрын

Thank you so much for these informative videos. Straight to the point and easy to follow along. I’ve learned so much from your videos.

@AngieHolden 2 жыл бұрын

Happy to help!

@brendalawrence6732 2 жыл бұрын

I love that watermelon print, so cute! This was such an informative video Angie. As always you show everything and explain everything so well. Thanks for that! Hugs, Brenda

@AngieHolden 2 жыл бұрын

Thanks so much! 😊

@chrislee6076 Жыл бұрын

Thank you for this! I just asked for this on a different video of yours!

@sherilewis1058 Жыл бұрын

Thank you so much for this video!! I feel so much more confident in making a full wrap tumbler ☺️!!

@AngieHolden Жыл бұрын

Thank you so much!

@carriejeanne3038 2 жыл бұрын

This video couldn’t be better timed, I purchased some 20 oz skinny tumblers and then realized they’re too small for my Cricut mug press. Placed an order for the inserts, can’t wait for them to get here so I can get started. Thanks, Angie!

@AngieHolden 2 жыл бұрын

Yay! Happy to help!

@tashanadaley2224 Жыл бұрын

So I tried it and it worked. However I did notice the water mark when using the infusable ink as you stated. You truly are a 💎

@MsBabylu 2 жыл бұрын

Great, I just ordered these, they should be here tomorrow. Thank you

@AngieHolden 2 жыл бұрын

Good luck!

@christeenlaiwa2354 2 жыл бұрын

Woo hoo! Of course you figured it out!

@TraceyHazel4308 2 жыл бұрын

Thank you. This was great. Can’t wait to try this.

@AngieHolden 2 жыл бұрын

Hope you enjoy!

@sandradowell9666 2 жыл бұрын

Thank you so much! I have been using a different method but you have to turn it a million times and it takes about 30 minutes to make one! I have put an order in for some silicone wraps and will be off to the races once I get them!

@AngieHolden 2 жыл бұрын

Glad it helped!

@denisejohnston6243 2 жыл бұрын

thanks for the video, just bought one today,,cant wait to try

@AngieHolden 2 жыл бұрын

Hope you enjoy it!

@kimison6084 2 жыл бұрын

I used these wraps & they are great!!

@AngieHolden 2 жыл бұрын

So happy you liked them!

@lynda2483 2 жыл бұрын

Great video, Angie. Thanks for sharing!

@AngieHolden 2 жыл бұрын

Thanks for watching!

@thelastwin 11 ай бұрын

Great info! Ordered the inserts from your link! Also subscribed😊Thank you

@AngieHolden 11 ай бұрын

Thanks for watching!

@lollybaezcolon7190 2 жыл бұрын

I follow someone that never uses inserts and the heat alone works amazing!

@AngieHolden 2 жыл бұрын

I haven't had success without the pressure.

@Bitsandpeices 2 жыл бұрын

Thanks for sharing a well taught video 😊

@AngieHolden 2 жыл бұрын

My pleasure 😊

@SheWritesHerJourney_ 2 жыл бұрын

I love this, such a great breakdown!

@AngieHolden 2 жыл бұрын

Glad you enjoyed it!

@elizabethb2503 2 жыл бұрын

I was REALLY rooting for the camp mug!!😭 I want those so bad. Excellent tutorial. I haven't seen the mug press IRL, but it looks like a button on the bottom where the mug sits, so upside down, it would go around that & lower in the machine missing full heat. Never thought about it before seeing this. Thank you!!

@AngieHolden 2 жыл бұрын

Correct! That is exactly what happens! I wanted to try it with it all the way down just to test but definitely picking up works better!

@scuevas1023 2 жыл бұрын

Excellent tutorial!

@AngieHolden 2 жыл бұрын

Glad you liked it!

@creiamoinsieme Жыл бұрын

Grazie per le tue idee

@barbmcconville2741 Жыл бұрын

I judged wanted to thank you and mr crafty pants about doing tumblers in the Cricut mug press. Turned out FABULOUS, small issue with seam, totally my fault. Infusible marker and heat gun fixed it THANK YOU THANK YOU THANK YOU!!!!

@AngieHolden Жыл бұрын

Happy to help!

@auntienikkisgamin9251 2 жыл бұрын

Great video I really haven't used my mug press since Xmas so I'm willing to try and signed up for the class

@AngieHolden 2 жыл бұрын

Yay! So glad!

@sylviathomas7482 Жыл бұрын

You are Awesome 👏 👏👏Thank you for helping me to understand all of this❣️

@AngieHolden Жыл бұрын

Happy to help!

@MakeupWithSmidge Жыл бұрын

I had no idea the mug press didnt automatically tighten to the pressure needed Thank you so much

@tashanadaley2224 Жыл бұрын

Thank you love this. I saw someone use a skewer under the tumbler when flipping to heat up the top. It actually worked

@AngieHolden Жыл бұрын

Great tip!

@tashanadaley2224 Жыл бұрын

@@AngieHolden now I'm really going to get the mug press lol thanks for the tutorial. 🥰🥰

@tashanadaley2224 Жыл бұрын

@@AngieHolden so today I tried using the sublimation ink print the tumbler came out flawless 👌🏾 thank you again

@loismthompson3918 2 жыл бұрын

Thanks for this info.

@AngieHolden 2 жыл бұрын

No problem!

@lanegralapaz9897 2 жыл бұрын

OMG Yess, thank you!!!

@AngieHolden 2 жыл бұрын

You are very welcome!

@loiseubank7749 Ай бұрын

Awesome, thank you

@AngieHolden Ай бұрын

You're welcome!

@sunismoo Жыл бұрын

Thanks!

@misslitaatl 11 ай бұрын

Thanks for letting us learn from your mistakes before we waste all of our blanks. Great video!

@AngieHolden 11 ай бұрын

My pleasure!

@melbradley676 2 жыл бұрын

Just thought I would say I have used a silicone baking mat cut up and put around in layers to close the gaps for the skinny tumblers and/or anything else that is too small for sublimation with printed infusible ink. It worked just fine. Maybe test that out on a video sometime to see if you get good results as well.

@Aukena Жыл бұрын

I was just wondering about that

@daleriedener5581 2 жыл бұрын

Thank you 😊

@AngieHolden 2 жыл бұрын

You're welcome 😊

@robertkahovec3451 8 ай бұрын

I just used on the 20 oz. And it was fine !! Just a little fading at the top so will hold up a bit when I close. Thanks for the tips.

@AngieHolden 8 ай бұрын

Good stuff!

@GayleDoesDIY Жыл бұрын

Thanks for explaining those imperfections, I was wondering why I got those warped bubbles when I use the insert with infusible ink sheets

@lollybaezcolon7190 2 жыл бұрын

If you put a medal stirrer or butter knife when you flip the cup, that helps.

@MyNailsandMorebyJohna 2 жыл бұрын

great teaching video again

@AngieHolden 2 жыл бұрын

Any time!

@MyNailsandMorebyJohna 2 жыл бұрын

@@AngieHolden you are welcome honey

@CherylFoster52 2 жыл бұрын

This is great ❤ I use my silicone mat that I order for my epoxy it came with two mats so I use one for my tumblers.and I figure out a few more great tips. I use a metal stirrer to lay down on the bottom plate

@rosalindalozano233 2 жыл бұрын

Please explain the metal stirrer 🙏

@CherylFoster52 2 жыл бұрын

@@rosalindalozano233 I place the metal stirrer on the bottom of the metal plate it keep your tumbler from going all the down to the bottom, it help you also got a even press for the top of your tumbler

@AngieHolden 2 жыл бұрын

Interesting! I was fine just picking mine up a bit and closing the press.

@CherylFoster52 2 жыл бұрын

@@AngieHolden yes I do mines like that sometimes but I forgot one time so that's how I came across doing like that, I learn so much from you

@AngieHolden 2 жыл бұрын

Awe! Thanks!

@kathrynwiford874 Жыл бұрын

Ordered the wraps, followed all your instructions precisely, and I LOVE MY NEW TUMBLER!!!! THANK YOU!!!! LOVE LOVE LOVE all your videos and hard work! Question . . . How do you print a full tumble wrap thru Design Scape? I had to print twice and tape.

@AngieHolden Жыл бұрын

I don't use Design Space to print. I have a video coming up with some other free options!

@tobitaruiz5963 Жыл бұрын

Hoping Circut comes out with an option to press tumblers because for the price it is my opinion that the process should be less complicated when using the mug press.

@rosalindalozano233 2 жыл бұрын

Glass works as long as you heat the glass before you sublimated. I fill with warm water for a few minutes and dry thoroughly) I've had no problems.

@AngieHolden 2 жыл бұрын

I have just decided not to recommend it as there have been several issues.

@cathydownes8757 5 ай бұрын

I am going to try these inserts with stitched neoprene stubby coolers....fingers are crossed, I use an insert in them as well

@AngieHolden 5 ай бұрын

I haven't had any luck with that!

@lollybaezcolon7190 2 жыл бұрын

Angie, on the top it’s easier to tape it pressing the paper inside the cup this way it will sublimate on the rim.

@AngieHolden 2 жыл бұрын

I did that on the second one!

@lollybaezcolon7190 2 жыл бұрын

I love all your tutorials! Thank you!

@jocelynjones2035 Жыл бұрын

Finally I've found what's wrong. I've gone through 7 tumblers and they all have those watermarks and I couldn't figure out where it was coming from. I'm doing sublimation and the mats and every single tumbler has come out with those marks

@winterstar4813 Жыл бұрын

you are so awesome wow

@jennalmonte8290 2 жыл бұрын

Am loving this. Could you shrink wrap to ensure no ghosting happens? I won’t get my sleeves until Wednesday- cannot wait to try!

@AngieHolden 2 жыл бұрын

There really isn't any reason to shrink wrap if using this method. Shrink wrapping is to apply pressure when using a convection oven.

@amandasmolinsky2246 Жыл бұрын

To fix your seam you need to cut the excess white from your sheet before wrapping

@minitorestrepo7233 2 жыл бұрын

I signed up already.

@AngieHolden 2 жыл бұрын

Yay! See you there!

@lindakent5853 2 жыл бұрын

Great video. Would you suggest getting 2 sets of inserts and swap them out instead of using the same one?

@AngieHolden 2 жыл бұрын

I guess you could as they do get really hot.

@tamzynkitto7107 Жыл бұрын

Hi, I love your channel and have had great projects with your tutorials :) Where you had issues with the whole sheet of infusible ink and the moisture marks, do you think smaller images that were weeded and cut out then taped onto the skinny tumbler would work better? Thankyou x

@AngieHolden Жыл бұрын

Yes I think smaller images would be better!

@pattibaileydesigns 2 жыл бұрын

Great video Angie! Thanks for finding a product that creates that tight fit we need. You mentioned that when you flip the skinny tumbler, you should lift it slight off the bottom of the press. Shouldn't you do that for both the top and the bottom so neither end touches the bottom? If not, can you explain why? Thanks so much and again, great video - as always! :)

@AngieHolden 2 жыл бұрын

It is fine to touch the bottom plate. However, when you flip it, the tumbler is open and will NOT touch the bottom plate but instead go around it. So it actually goes in LOWER than the tumbler inserted with the bottom side down.

@pattibaileydesigns 2 жыл бұрын

@@AngieHolden That makes sense! There have been other videos out there saying to lift it but never explained why.

@haideemeza6016 2 жыл бұрын

I love all your videos. ❤️ what is the best iron on for shirts that last long. Please ?

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/rNVkrJCYluCWeI0.html

@haideemeza6016 2 жыл бұрын

Thankyou so much. You’re so helpful 😊

@aliciabliss1220 Жыл бұрын

Do you have a video showing how you printed your sublimation prints for the 20o tumbler? Currently struggling with this.

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/ocydrdV908nLmJ8.html

@craftduoramz9221 Жыл бұрын

Thanks for sharing, have to give this a try. I wonder if you place parchment paper between the print sheet and PYD insert that it may help with the moisture you mentioned?

@carolyncoleman1962 2 ай бұрын

Have you tried this? Curious if it works!

@preciouspeaces 2 жыл бұрын

TFS👍🏽

@AngieHolden 2 жыл бұрын

Any time!

@katrinriemer-puchta2607 Жыл бұрын

Danke für deine Videos. Sie haben mir sehr geholfen. Eine Frage hab ich, hast du einen link für den Klebeband Roller? Ich finde es toll, dass er kleine Streifen macht. Danke

@AngieHolden Жыл бұрын

I link all supplies in the description for the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.

@angelquade2590 Жыл бұрын

Just an FYI, saw another video where they tried infusible ink on tumbler, flipping it like you in Cricut Mug Press and it did the same as yours. They think the heat reheats the infusible ink when flipped and fades it and makes those markings.

@AngieHolden Жыл бұрын

Something DEFINITELY happens with the Infusible Ink that is different.

@mariangurney977 3 ай бұрын

Thanks for this video. Just starting out with sublimation. I'm doing my first tumblers this weekend. Question, when you did the 2nd pass at the tumbler and taped the image inside the tumbler, did you add protective paper inside to prevent bleeding into the mug press? Thanks

@AngieHolden 3 ай бұрын

I am not sure what this references but anything inside wouldn't bleed out to the mug press sides.

@bessiegoldsmith9210 2 жыл бұрын

Have you ever tried acid etching on glass tumblers instead of sublimation.

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/eduBmpN_mq23kok.html

@BigSister56 2 жыл бұрын

Angie when will they be bring out a new mug press that does more than just mugs

@AngieHolden 2 жыл бұрын

I seriously have no idea if that is even going to happen?

@jokebosman8772 Жыл бұрын

is there a shop in the netjerlands who sels the inserts

@lisamoody313 Жыл бұрын

Does the protective paper you use work the same as the butcher paper that they recommended for the heat press in the Sublimation Camp?

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/sNh1hcZenrjed3k.html

@glazersworldakamaryschmitt8811 2 жыл бұрын

I know you said you aren’t great with the seams but how would you go about getting that lined up properly? Should the paper overlap or line up edge to edge when you wrap it around?

@AngieHolden 2 жыл бұрын

I do a slight overlap a lot as I personally do better with that. To line up properly, cut the bottom of your paper straight so that you can rest is on the table as your wrap around with your tumbler standing up. Then the entire thing will be straight.

@bkbrp64 2 жыл бұрын

Great information! Question, though. Are you suggesting ONLY using sublimation prints and not the infusible ink? I don't have a sublimation printer unfortunately and it's not in the budget at this time. Can you buy pre-printed sublimation sheets by any chance? Also, on your camp for May 12-14...I'd like to join, but have to work. Can I watch later, or do I have to purchase the All Access Pass to watch later? Thanks!!

@AngieHolden 2 жыл бұрын

You can buy pre-printed sublimation sheets and those may work better! I didn't have any luck with Infusible Ink and wanted to be honest about that. If you can't watch during the camp days, you do need an All-Access pass to get extended access.

@lucypagan3969 2 ай бұрын

I love the watermelon look Is there a certain press that you can make several sizes or would I have to purchase a mug press and a tumbler press sorry I am a newbie to all this. Thank you

@AngieHolden 2 ай бұрын

Yep I would try this press: kzfaq.info/get/bejne/sNRdm617tZuYpXU.html

@tammybishop8239 Жыл бұрын

Is there a video that shows how to print the watermelon wrap and what program to use?

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/ocydrdV908nLmJ8.html

@jlc1023 Жыл бұрын

Hi! Thanks for the video! Can I ask where you got those shelves in the background? I'm looking for cricut/printer storage like this. TIA!!!

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/ob2RiKxhx8ysoJs.html

@kristinehowe7811 6 ай бұрын

I was wondering if you were able to figure out a way to stop the moisture issue when using infusible transfer sheets?

@AngieHolden 6 ай бұрын

I wasn't. These pads seem to hold a ton of moisture.

@joannamatamoros9792 Жыл бұрын

Hi Angie have you tried the silicone sleeve on the skinny tumblers 😫

@AngieHolden Жыл бұрын

I have not.

@jerriling4083 2 жыл бұрын

Would using a silicone tumbler sleeve possibly work instead of the inserts?

@AngieHolden 2 жыл бұрын

I actually JUST saw these yesterday. I am not sure!

@carynclark3868 6 ай бұрын

Loved your video but have a question. Using infusible ink transfers on a stainles steel tumbler do you have to use a longer time for it. I tried and it didn't hardly show. I was using the inserts which are great. Help please

@AngieHolden 6 ай бұрын

With this press, it is sometimes tough to dial in how much time you need. You may need more depending on the blank.

@stacy_thecraftycat6611 2 жыл бұрын

I wonder if you did the infusible ink on the 20 oz and let it cool down before turning it over if it would work better. Just wondering if it messed up on the section you did first or the second you did second. Thank you for the tips!

@AngieHolden 2 жыл бұрын

I am fairly certain it messed up on the first press.

@stacy_thecraftycat6611 2 жыл бұрын

@@AngieHolden well darn. lol I don't have a sublimation printer but do have some infusible ink sheets so was really hoping on that one. Thanks for at least trying it!

@AngieHolden 2 жыл бұрын

Yea I just had no luck. I think you could do like a small design on a camping mug but the full wraps on the larger pieces may not be possible.

@whitetwilightph Жыл бұрын

Hi! I would simply like to ask if your Cricut mug machine emits smoke during heat pressing?

@AngieHolden Жыл бұрын

Generally no. However, it can emit moisture or steam depending on what you are pressing and these inserts do have quite a bit of moisture.

@raenicole9519 2 жыл бұрын

What measurement (template size) did you use for the skinny tumbler?

@AngieHolden 2 жыл бұрын

I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!

@lynnkaufman9006 10 ай бұрын

could you use shrink wraps to hold the sublimation paper in place?

@AngieHolden 10 ай бұрын

I would not. It will likely melt in a press like this.

@1120forevrr 2 жыл бұрын

If you ever for example press for a longer time will it be ok or mess up the project??

@AngieHolden 2 жыл бұрын

You can mess up a project by overheating.

@RainorShine1 Жыл бұрын

Walh makes a horizontal auto press wonder if that would be better for 20oz tumblers

@AngieHolden Жыл бұрын

Not sure!

@martiwieland4757 2 жыл бұрын

I would love to know about your tape dispenser.

@AngieHolden 2 жыл бұрын

I have linked it in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.

@ishaniastanley8538 2 жыл бұрын

Could you share with me the measurements you’re using for the skinny Tumblr

@AngieHolden 2 жыл бұрын

I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!

@cici0217 Жыл бұрын

Wow great video. I've been wanting to learn about sublimation. I've learned that you need sublimation blanks like cups, tumblers etc. But stainless steel camping mug, not coated for sublimation and it still worked.. I'm confused

@AngieHolden Жыл бұрын

The camping mug I used was coated for sublimation. The sublimation coating can be clear.

@73ondrea Жыл бұрын

Any plans to do another Sublimation Camp?

@AngieHolden Жыл бұрын

Yep! It will be in May!

@kpluse Жыл бұрын

If I don't have a sublimation printer, could I use a full-size infusible ink page for a design (just not as fancy)?

@AngieHolden Жыл бұрын

Yes you can.

@jrhodes3216 2 жыл бұрын

Angie… I have been so afraid to press anything other than Cricut mugs in mine because I saw a couple instances where people had done “non-approved” items and it somehow “bricked” their press and it became unusable. Do you know if this is true and if so, do we know what causes this to happen?

@AngieHolden 2 жыл бұрын

Try this: kzfaq.info/get/bejne/ldKSn9FjmrKlfn0.html

@Ladidalady 2 жыл бұрын

Help please! My tumbler starting smoking about half way through. Is that the silicone mat (new) or maybe the tumbler itself? Is that normal? Is it ok? Thanks!

@AngieHolden 2 жыл бұрын

Yep. It is moisture from the wrap. I don't know why but they seem to do that every time.

@ozany18 2 жыл бұрын

can i use the printer paper sublimation and smart vinyl together in one please let me know ?

@AngieHolden 2 жыл бұрын

You could I guess. I just generally make a sublimation design and do it all at once.

@anngillespie2677 Жыл бұрын

What if the inserts were heated with a press before it goes in the mug press? Would that help get rid of the moisture?

@AngieHolden Жыл бұрын

Not sure! It didn't seem to make a difference when I was making several in a row.

@cryavi2005 11 ай бұрын

Hello! Can you print on sublimation paper using an inkjet printer? Or does it have to be a sublimation printer ink? To be able to use it on your mug? I hope i make sense. Thank you

@AngieHolden 11 ай бұрын

You have to have sublimation ink in a printer.

@cryavi2005 11 ай бұрын

@@AngieHolden ok thank you

@dnecey32 2 жыл бұрын

I have made several skinny 20oz tumblers in my cricut mug press but I don’t use anything on it like a wrap the wall isn’t even touching the tumbler and it comes out perfect I do 3 minutes on one side turn it then flip it and do the same thing

@AngieHolden 2 жыл бұрын

I never have good luck like that!

@dnecey32 2 жыл бұрын

@@AngieHolden it took me a few tries but I think it was because I didn’t have it taped right enough I didn’t steer out doing it this way my friend does it this way and they come out perfect idk how but they do lol