SKODA FABIA Front Wing removal/refit (Mk1 99-07)

Рет қаралды 66,030

4 жыл бұрын

In this video I show you how I removed and refit the Front left wing panel on a Skoda Fabia MK1 (99-07) which is similar to other VW/Audi/Seat/Skoda models
Front bumper removal/refit kzfaq.info/get/bejne/j8uEq7Fn3-CteKc.html
Inner plastic wheel arch liner kzfaq.info/get/bejne/jryKgtijraeUoGg.html
front wing bolts and nut M5x16 10mm Torque 8Nm
Bumper wing clips
Right 6Y0807050A
Left 6Y0807049A
RS Right 6Y0807050C
RS Left 6Y0807049C
Sealant: amzn.to/3i2hivy
Please Like this video:👍 kzfaq.info/get/bejne/bNCHfZZ-x5i0gKc.html
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 kzfaq.info/get/bejne/bNCHfZZ-x5i0gKc.html
Follow me on Twitter:👍 HatBoyHarvey
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)
Lemon Fight - Stronger (feat. Jessica Reynoso) [NCS Release].mp3
kzfaq.info/get/bejne/naqniaqEnJvXhXU.html

Пікірлер: 69

@tonymacdonald2870 4 жыл бұрын

Love your videos. what you do is incredible, and always helpful even if not needed right now. many thanks from a MK1 owner.

@HatBoyHarvey 4 жыл бұрын

Much appreciated, Glad you like them. They will always be there to help anyone, which engine model have you, any issues? :-)

@tonymacdonald2870 4 жыл бұрын

@@HatBoyHarvey mine is 07 TDI 100 Estate 1893cc. I never had any issues with it, passes mot no problems. next one is 22/11. I watch all your videos. these cars are worth ever penny payed for them.

@HatBoyHarvey 4 жыл бұрын

Yes I agree, worth every penny; Estate great. Watch out for the sills rusting though as mine has started to do this (03 car) :-)

@fotisparolas7732 4 жыл бұрын

Very good video, as always. Appreciate that you didn't "cut" your minor mistake with the soundproofing piece. Keep it up man.

@HatBoyHarvey 4 жыл бұрын

Thanks, yep it fell out, but not sure which way it goes back in, or with any confidence what it is actually for - I put it back with the curved section facing down - baffling - doesn't seem obvious to me !?

@ruimvp 4 жыл бұрын

Another superb piece of this form of art.

@filipstrojek6485 11 ай бұрын

Thanks for making that kind of content mate you have helped me a lot and saved me load of money working on my skoda

@HatBoyHarvey 11 ай бұрын

You're very welcome, glad to help :-)

@ashl3yow3n 4 жыл бұрын

wicked number plate and your videos been so helpful to me

@HatBoyHarvey 4 жыл бұрын

Absolutely. Glad my videos have helped you :-)

@jancicvarek160 11 ай бұрын

Very good, thank you, Hat Boy. 👍😀

@HatBoyHarvey 11 ай бұрын

You're welcome :-)

@branejankovic5879 4 жыл бұрын

Great video!

@draganbogicevic2934 4 жыл бұрын

fine job mate

@marsiseret7140 2 жыл бұрын

Great vid!

@joronyhanma 8 ай бұрын

Appreciate your videos a lot will replace mine in the next days. Greetings from Bulgaria 🇧🇬

@HatBoyHarvey 8 ай бұрын

Vie ste dobre doshli. Glad to help :-)

@pavelozdani439 2 жыл бұрын

thanks for the great video - it helped me a lot

@HatBoyHarvey 2 жыл бұрын

Glad it helped you, thank :-)

@akidkhaled9161 3 жыл бұрын

Perfekt. Thanks

@albertikupper 4 жыл бұрын

YES I NEED THAT THANKS YOU

@HatBoyHarvey 4 жыл бұрын

No worries ;-)

@adnanabay 4 жыл бұрын

Great job bro.

@HatBoyHarvey 4 жыл бұрын

Thanks bro :-)

@matthewbaxter277 4 жыл бұрын

Great helpfull vidio as allways 😊👍

@HatBoyHarvey 4 жыл бұрын

Glad you think so, I've still not done the welding :-)

@sergeyenigma5841 4 жыл бұрын

Красавчик!!!

@sergrey260 2 жыл бұрын

Супер, я готов отдать свою машину в ваши руки, вы лучший.

@HatBoyHarvey 2 жыл бұрын

Спасибо за ваши добрые слова :-)

@user-oe2sw6xo7g 4 ай бұрын

Дякую за інформацію

@HatBoyHarvey 4 ай бұрын

будь ласка :-)

@matthardy6328 9 ай бұрын

Great video Harvey, but I have to say…… your shoes need replacing more than that wing. 😂😂😂. Good informative videos. Keep em coming.

@HatBoyHarvey 9 ай бұрын

YEP, have now replaced those with some recycled ones I have borrowed and repaired from my uncle Bob! :-)

@rabnawazkhan1837 2 жыл бұрын

Nice one sir

@HatBoyHarvey 2 жыл бұрын

You're very welcome :-)

@alex43111 3 жыл бұрын

The dirt gathering there is a common problem in the octavia mk 1 and 2 also.

@paulandrews3785 3 жыл бұрын

Good video my man Just painted a new wing on vrs will fit to day some point think the fome is a sound deadening took both out worked on lots of mk4 golfs and thay rust In this area but the Fabia s seem to be ok Just got rid anyways Keep up the great work 😉job dun rite as always

@HatBoyHarvey 3 жыл бұрын

Thanks, mine's rusting at the bottom a bit and the sill needs welding, but haven't got round to it yet. Did you have your wing sprayed or did you do it yourself and if so what did you use?

@paulandrews3785 3 жыл бұрын

@@HatBoyHarvey Did it my self 2k base coat and lacquer magic black bumper needs TLC to lol..😉mite have to weld same bit on mine to haven't took it off yet?!!! love your vids have helped me out good knowledge on the fabia s cheers

@pavelvalenta9207 2 жыл бұрын

👍👍👍👍

@ju94160 2 ай бұрын

❤️

@HatBoyHarvey 2 ай бұрын

My pleasure :-)

@pilinhamole69 3 жыл бұрын

Someone know the name of the glue used to seal the side wing?

@sibinspasojevic3102 4 жыл бұрын

One more great video sir! I have a question if you find the time: I have a Skoda Fabia like yours 1.4 16 valve 100 bhp 2004. During driving when I press the gas pedal the asr,epc and check engine light go on at the same time. Also a few days ago oil started mildly leaking from the crankcase breather. Have you encountered such a problem? Thanks in any case.

@HatBoyHarvey 4 жыл бұрын

You're very welcome. Mine is the 1.9 8 valve pumpe duse diesel, but I believe yours has high engine balance pressures due to only having 3 cyclinders so cleaning the crank case breather system and fix any 'leaking' pipes/connections to work correctly should help here. there are a number of pipes none return valves and an oil separator half way down the engine block, probably on the back of your engine which get blocked. fairly important on 3 cyclinder engines. I would do this first and see if the lights go out.

@sibinspasojevic3102 4 жыл бұрын

@@HatBoyHarvey the engine is a four cylinder like the one that went in to the Golf mark 4 if i'm not mistaken. I will check that. Is there i filter inside the casing? That's my last question😀

@lukelukas42 4 жыл бұрын

hi, i like your videos really nice really informative. would you consider making video about skoda fabia windscreen washer jet, because of they are fixed plastic panel, once panel removed then they lost aliment setting to windscreen ,therefore it is almost impossible get right spray pattern on windscreen again. Thanks

@HatBoyHarvey 4 жыл бұрын

Thanks, glad you like them, the jet washers don't adjust as far as my experience goes. Mine were great when new for the first five or so years, then they began spraying badly and like you I couldn't adjust them well enough to get the great spray pattern back. I replaced mine with cheaper none oem ones which were naff. Never got round to buying two new oem ones which is the way to go in my opinion or change them for some other adjustable make/model from another car that can be made to fit, When i find some good ones I'll do a video, thanks :-)

@24579william 3 жыл бұрын

i replaced my jet washers, just go to skoda or your local TPS. cheap and easy.

@user-is3jv7dw3z 7 ай бұрын

The t shape piece of foam which fell out how does it fit back in and which way up does it go? My dad is trying to work it out but is stumped so any help would be appreciated thanks

@HatBoyHarvey 7 ай бұрын

I don't know either, it just fell out. I believe that the base of the T is meant to rest on the plastic liner and holding it in place stopping it flapping and deadening any vibrations. That's how I put it back. If you slow the video down you can see how it dropped out. Hope this helps and thanks for asking :-)

@RandomClips27. Жыл бұрын

Is this the same for the FABIA AMBIENTE 16V 100 MK 1 Thanks

@HatBoyHarvey Жыл бұрын

Same wing, slightly different bumper

@RandomClips27. Жыл бұрын

@@HatBoyHarvey ok thanks 👍👍

@user-qi7lh8ne1c 2 ай бұрын

Я каждую весну снимаю подкрылки и вымываю кузов от грязи, соли и тд.

@HatBoyHarvey 2 ай бұрын

спасибо, это такая замечательная идея. Мне бы хотелось подумать об этом до того, как ты сказал, что сделал это. это должно стать весенним распорядком дня во многих странах с северным климатом Европы и Америки :-))

@ayoubzay4192 4 жыл бұрын

i have a skoda fabia but motor is golf 3

@jordanthomas6890 3 жыл бұрын

What are the wheel arch lineing screws call

@HatBoyHarvey 3 жыл бұрын

vw large flage torx screws

@TheConsettcowboy Жыл бұрын

The piece of foam that fell out of the wing is sound deadening. I wouldn't put it back on the car because thats how the panels rot away.

@knowyourenemy66 10 ай бұрын

Very helpful but removing the bumper and wheel is not needed. I removed the fender in 43 minutes with simple tools and no experience. No bumper removal or lifting the car. Also, how do people work with these protective gloves?🙄

@sergrey260 2 жыл бұрын

Жаль что нас разделяет расстояние, учитель

@paxvobiscum8859 3 жыл бұрын

👋👍🙋🇵🇱💪🌞🌞🌞

@vmarh66 3 жыл бұрын

Так и не понял зачем он крыло снимал?

@HatBoyHarvey 3 жыл бұрын

inspect the rust on the wing/sill bottom, which needs welding now :-)

@MrocznyTechnik 3 жыл бұрын

Dear Fellow Skoda Fabia Mk1 users. I must worn you. This what I fund on my MK1 2005 Combi: ibb.co/cLb6xbM ibb.co/6WGt6S9 ibb.co/3kv6X1L This crap was hidden under what looked like factory sealant, thick rubberish layer in body color.I managed to peel this hole with bare fingers. Holes are on both sides, they are located at jack-stand support points. Sils are in PERFECT condition, no visible rust anywhere...and such crappy surprise. I will talk with some specialists tomorrow, but I'm worried, this is structural damage and time to say goodbye is soon. Maybe I had bad luck, and there was some factory error with corrosion protecting, maybe jack stand damaged sill-rant avd rust done it's nasty job over time. It's sad to keep a car in perfect mechanical condition and find something like this during routine tyres change :(

@HatBoyHarvey 3 жыл бұрын

Thanks, that looks horrible, I feel you pain, the holes look like they go deep and are going to be hard to fix. Hope mine isn't the same when I get around to a closer inspection :(

@MrocznyTechnik 3 жыл бұрын

@@HatBoyHarvey Check it ASAP. Maybe is not to late in your case. It's shame to scrap the car, that you cared about so much.. I'll consult local skoda expert (who rebuilds Skoda 105 just for fun). According to bodywork manual, structural rails are away from this damaged place, so there is a hope. Take care!