Think your right ..I 👍👍👍👍👍👍😀😀🍻🍻🍻

Sure are for the money 💰 👍👍👍

Having a little problem at moment.. I had the abs and ars light on the dash.. reader arrived plugged it in. Carried out a scan found faults so I erased the faults which turned the light off..its now back on but won't turn off. Any ideas why

@@woodyforest7308 ok if you have cleared codes and they have come back I would suggest there is a problem that needs addressing.. what codes have you got on the reader??? Could possibly be a abs wheel sensor ..

Spot on m8 that what comes up. I thought I could just turn it off again. It was booked in for mot. I was wanting to just get it through before doing any work on her. Guess I'll have to have it change first. Cheers m8

So nice of you

To be honest I'm not sure I would try .. as long as you set the ah and the type and change the battery number .. I seen some guys have just put in 123456789 .. as long as you change it and you have the ah and type in .. the car will know its been charged.. but if your really unsure I would seek expert advise .. this video is just how I did it I'm not a qualified mechanic.. hope you get it sorted 👍 👍👍👍

Not had any problems with it 👍

Still wrong though🤨

To be honest I'm not sure I would of thought if the codes have cleared and not come back then you should be OK.. if your still having problems then try registering the battery again .. I'm not a mechanic so if your not sure seek professional advice..

Thanks. And also, on my battery says 59mAh and Ancel has no 59 value. I guess I choose 60

One more question: do you perform battery registration before giving the contact with the car key or starting the car for the first time? Because you get no warning lighte at all. Thanks again. I guess I'll do the battery registration once again

It won't hurt to do it again

I think as long as you put a code I and the amp rating it will know its been changed... I never had a full code number I just put wat I had charged the rating and no problems with it ... its now 2024 so it's been a while

I would check with the manufacturer if your unsure .. I've seen from other videos that if you get the type the ah ratings in and change the serial number should work.. I've seen some people just put 123456789 in as the serial . The car knows a change gas been made .... I'm not an expert or a mechanic the video is based on my experience... if your unsure seek professional advice or ask the manufacturer

On most of the new cars with stop start technology .. you do need to register the new battery to the car ..

@@Grahams-Grass Great video (which steered me into getting one of these buggers for myself), but I did notice a small oopsie - as long as the battery's made in Europe, the proper battery type's "Fleece" and not "Binary AGM" according to a myriad of comments at the Audi forums I tend to haunt. No one seems to have a bloody clue what's the technical difference in the charging curves between the two AGM types, though, only that there may be one and that the strange name's probably a mistranslation of a German term into Chinese, which got extra mangled back into English ;)

If you have a battery it will have a serial number on it ... you definitely need to put the battery amp hours even if they are the same the car needs to know you have changed it.... if you follow what the scan tool asks for you should be ok ...

@@Grahams-Grass Thank you, but BEM-Code and Serial Number are two different things!

@@Andyfun2010 the code I used was the serial number off the bar code which had 12 numbers the scan tool will only take 10 so I just put in the first 10 numbers. And amp hour number rating and the battery type ... there is no other numbers on the battery ... did it 10 mounths ago and every thing is spot on. state of charge back to 100% .. hope that helps 👍

@@Grahams-Grass I will try the same! Thanks a lot. 👍🏻

@@Andyfun2010 follow up video kzfaq.info/get/bejne/m9akYJSJyqy0Y58.html

To be honest I haven't looked for that... I would think it's in the live data somewhere 🤔🤷‍♂️

@@Grahams-Grass thanks for the response . I looked there but nothing

@@Grahams-Grass it isn't there neither

I'm not sure .. if you can it would say battery registration in the menu ... they don't all work on audi for Some reason

It has live data... not sure about the injector values you'll have to look in to that one

Thanks does it show fuel trims and 02 sensors on live data

@abdulbeany1894 I've never needed it so I can't tell you sorry ... I've used it to do a few resets battery reg dpf regen and reset speed sensor...

@@Grahams-Grass thanks