Bill is amazing. He restored my 1229 a few years ago. He will talk you through the entire process. You cannot find a better more personal hands on person anywhere. So nice to see him sharing his passion with you in this interview.

Such a unique and authentic person Bill is. Really enjoyed this.

My goal in life is to find something that I’m so passionate about that the “job” never feels like a job. It is inspiring to see a perfect example of this with Mr. Neumann.

Such a great interview! Happen to have a 1219 so guess who I’m calling tomorrow. Praying Bill is well and in good health! What a wonderful gentleman!

Thanks so much for this interview. Love to see Bill's dedication to the craft. I was able to finally acquire the original Dual 1219 that was my childhood introduction into the audiophile hobby. TL/DR, this was my father's purchase back when I was a pre-teen, and after his death in the late 80's it sat in storage. Case and chassis are pristine, and dust cover is intact, but I've been dreading having to have this serviced and have only done surface cleaning and have not powered on to test. I'll definitely be having Bill's team do the service on this unit, I just want to see it properly set up and operational again, even though it will not be my primary turntable. - After thinking, had to add, maybe it will be my primary. Hope it's as good as I remember.

I could've listened to Bill talk for another two hours. I bought a 1229 from him a few years ago and couldn't be happier.

Jethro Tull Benefit reference😂. Luv it. Great album 1229 great turntable. Mine going strong since 73.

It's very rare that I comment on a KZfaq video, but this was wonderful. Great to see someone with such passion and skill offer such a much-needed service. I very much enjoyed listening to his stories and his expertise.

This tops all I watched this year so far. Great show, best wishes to both.

I remember in the late 60s and early 70s a lot of Hi-Fi stores had their own service departments. Those that sold Dual also had a large supply of Dual parts on hand. You could replace a tone arm a counter weight, an idler wheel or the screws. And they could service them in shop. I still have a Dual 1209 from 1969. Even their base models were well built.

Great episode! I bought my 1219 with box and all paperworks some years ago. Seeing it has been making people happy for 50 years is so amazing

Due to my Dad being a fan of Dual I have followed along with that tradition. I was fortunate enough to find a 701 fully refurbished and ready to go for a reasonable price. It took a 90 minute ferry ride and an hour drive to get it, but hey, made an overnight adventure. Very happy with it.

He learned it all himself. He's particularly mechanically inclined, so he mastered it because he enjoyed the challenge. I'm an electronics guy, & he's right that us Electronics & Mechanics guys aren't made of quite the same stuff. But I've spent the last few months running around fattening up my Dual collection; for the express purpose of learning how to fix them because nobody else really wants to! And IF, never mind WHEN, I acquire a certain degree of knowledge & proficiency servicing them, I will want to make my services available to the public at large. But not before! There's plenty of "hackers" out there, & I refuse to be one of them, taking people's money! A close friend recommended this video to me, thought I might find it educational or at least entertaining. Fortunately, Kevin & Bill did a wonderful job of making it both those things. I'm not naturally mechanically inclined by nature. But I love these strange & wonderful Squarehead cuckoo-clock turntables with their Rube Goldberg mechanisms, so I will persevere. Wish me luck!🤞

Absolutely love when you are able to do a episode like this!! I'm only half way through. Love the old stories and experiences. And a Grand Rapids Michigan reference 🤔🤣💯❤️

In 1971 as a high-schooler I had my heart set on the new Garrard Zero-One Hundred Tangential Tracking Turntable. The salesperson at my favorite St. Louis area audio shop (the aptly named Hi Fi Fo Fum, which only just closed its doors a few years ago) talked me out of the Garrard in favor of a Dual 1219 with Shure phono cartridge. I'm forever grateful to that salesperson, and wish I still had that turntable today. Thanks for this great conversation.

That was a fantastic discussion,thank you very much. Kindest regards Graham.

That was THE BEST! Thank you for the interview. You did a great job as the host and Bill is a treasure. As a phone only customer of his (701 purchase) it was a treat to see him on vid live sharing his wisdom. Yours too. Thanks again.

I have a 701 just sitting around for years. Going to call him and see if I can get this old girl going again Great info and history lesson on Duals 👌

I love this interview. I just sent my 1245 in for repair and refurbishing. After talking with Bill as he stepped me through the entire process, he's my new best friend. He's that kind of guy.

I really enjoyed this interview. Thank you! My first turntable (in 1971) was a Dual 1218 with a Shure V15 Type IV. Had it for many years and don't remember why I sold it. Thank you, Mr. Neumann for your wisdom, information and anecdotes!

Awesome content listened to it twice so I didn't miss any details very informative Bill is incredibly wealth of knowledge your great also

I worked for the Dual importer in the Netherlands up to and including the CS701 and CS601 repairing anything from 1010 to 1229 and also the Perpetuum Ebner turntables and totally agree on the 1000 series. My first "real" turntable was the CS701 with the Shure V15 later I had an EMT TSD 15 complete with shell glued into the arm it worked and sounded great! Thanks for the interview and feeling the kinship with Bill.

I own one of Bill's 1229s, sits in our living room for all to see. I have it covered by a hand knitted cover made by my grandmother 40 years ago. Thanks for the interview, Bill is a down to earth kinda guy. Thanks, Joe.

Loved this great talk…. Already sent him my email about my “new” old Dual that replaces my 1976 Dual 1218, that I lost in a flood in 2007! Thanks sooo much! I need to come visit you and him!

What a great interview. I'm an owner of a Dual 1225 and a Dual 1229 that I'm working on. So great to hear Bill's thoughts and passion about Dual turntables! Thanks!

Great interview with some amazing information

Great interview! Thanks. I was lucky enough to find Bill in 2004, shortly, I guess after he put up his web page. He brought my Dual 1229 back to life after 20 years. It is still humming along today perfectly.

It was absolutely a pleasure listening to this discussion. I learned a great deal of information and truly appreciate the passion, both Bill and Kevin have for what they do. For those us who appreciate music sound and the amazing equipment that make it possible, we greatly appreciate these videos. Thanks Kevin and Bill for your time.

Great video! Love working on changers,love my dual 1019,the level of sofistication is top notch...great to see the person that is the godfather of these,also love elacs and pe as well.

I love my 1229, it sounds amazing and runs very well. Definitely a quality build, about 90% is all metal quality parts.

Kevin. I thoroughly enjoyed this video. Thanks for having Bill provide his insight to Dual and some history of the company too.

Great discussion. I learned a lot about my Dual 1019, which was my first turntable bought in 1969 as a student. Everything Bill said about the 10 series happened to mine. I had the optional 45 auto changer spindle that eventually screwed up the changer mechanism. I also stacked albums without knowing that it was verboten! The UA base came apart at the corners and I moved on to a Technics that is still going today with my son and grandson. Vinyl is back and so is the turntable and Dynaco A25's I bought in 1971.

I also had DUAL turntables my whole life as well! I remember a salesman in the 70's, showing us a Dual that still played at a 45° angle! I was impressed.I love DUALS! I should have never got rid of my CS 5000! I picked up CS 504 that is pretty good.

This man is a true inspiration for me. He's a mover and shaker and made it happen later in his life. I'm kind of on the same path and am working out of my Garage building and restoring JBL Cabinets, stereo cases and speaker stands.... and like Bill, I decided to go to the next step and just created a website and KZfaq channel. I hope I have a quarter of Bill's success. He gives me hope. Great interview Kevin!

Bill is such an amazing man. Purchased my 1229 from him. Thank you Kevin for the interview.

Your videos are generally always very good, but this one is exceptional! As a Dual 1228 owner, I have always believed there is something special about Dual products from the 70's. Now I know why and what a gem I have. Bill's knowledge and passion have convinced me it's well worth an investment in having him tune it up.

This man is an absolute sweetheart! This man is passionate, professional, capable, technically literate and above all honest. This man ENJOYS sharing his passions with customers and others. When I get enough money saved up I'm buying a Dual 701 because if he likes them they must be good. I'll send it to him after calling and IT WILL BE PROPERLY PACKED! This man was an absolute pressure to listen to. Thank you kind sir... The Autistic Werewolf is in your debt!

I thank both of you for the wonderful video. Its nice and refreshing to here talk about how well the old stuff was made. Not talk about something that cost $10,000 and its the greatest thing since sliced bread. Not everyone has a budget to buy that kind of gear. I deal alot of 70s type gear. I tell people to look for stuff that was top of the line in the 70s and they will have great sound. Thank you guys for being down to earth conversation.

I must say I’ve had a great time listening to this conversation. Exactly my thoughts for 50 years, since my first childhood Dual in 1972! Cheers Bill and Kevin!

Hello, from Hannover, Germany, where Emil Berliner produced the first Grammophones, later founded Label Deutsche Grammofon Gesellschaft, DGG. My first TT was a Dual 1010 in 1964 for 300 DM. I am astonished about popularity of Dual in USA. In Germany the US-TT Brand VPI is popular. I have a VPI Scout 1.1 and a McInt Amp.

I thought I would watch this over a few days… well maybe all at once. I loved the video. Two amazing people. I have a 1257 I bought in 1979. Still running. Had to recap it and clean it but still goes great. I’ll definitely visit Bill as well when we go to Iowa this fall. Can’t wait.

I am a Dual fan since I was a teenager.This is the best discussion about Dual and generally about what a turntable means. My respect mr Bill!

Both of these men are realists, and that is a Very good thing. Every minute of this conversation is worthwhile. I have been a fan of Dual turntables since long before I owned one, and I have had More Than One for many years now.

I'm sure there are plenty of people who would love to apprentice for these guys. Hell as a semi retired guy at 55 who loves all this stuff, and owned much of it in the 70's. The passion has to cut both directions. The desire to pass on the skills must exist also. Even if it takes years to find the right guy.

Sunday morning coming down with Bill and Kevin. He had me at Jethro Tull Benefit. Thank you for capturing his passion.

Fantastic video Kevin - thank you. I’ve purchased two Dual’s from Bill over the years, a 1219 and a 1229Q. Although I have a number of other vintage turntables in my collection, I hardly ever use them as the Dual’s are my favorites by far. They look great, they sound great, and they perform flawlessly thanks to Bill.

I am very bios because I am a Big Dual Fan! so I thoroughly enjoyed this show. But in general yes having interviews with people who are so passionate about their area of interest is awesome.

Bill is like asking a book question!!! Absolutely awesome!! I could listen to him all day!! Great video!! Joe from Mississauga Canada

Excellent sit down with Bill, I really enjoyed this. Loved how the name Dual came to be. And yep I own two 721’s and love them.

Kevin, thank you for this video. My turntable is my father's 1219, which is the same age as me. Still runs like a tank.

This is a great treat, Bill is the best. He recently rebuilt my 701 that I bought new in 1973, sounds amazing. I also have a Ortofon OM20 , just perfect sound.

I couldn't take my eyes off the Edison Diamond Disc on the mantle as Bill was discussing the "dual" ability to crank or plug in. Thank you to both Bill and Kevin for working to preserve quality audio reproduction and it's history.

Great video! Loved the interview with Bill; so much great information.

Haven't been into vinyl or turntables for decades, but still a fascinating interview. Wouldn't mind more interviews like this. Thanks to you & Bill.

Bill refurbished my 1229q back in 2007, and it STILL runs like new. I'd have no problems sending another DUAL to him. Great Video!

Well I thoroughly enjoyed that video. I had the pleasure of a long conversation with Bill and purchased a 1219 from him about 5 years ago. Very happy with that purchase as well as the equipment I’ve gotten from Kevin. Keep it up guys!

Awesome! My best friend in college had a dual in his room and the fact that I remember that tells you it had an impact on me. The discussion was great I'm sure I'll listen to this again and again thanks it was great

Just recently, Bill did an amazing job servicing my Dual 604.... and the handmade wood plinth is just awesome! I couldn't be more satisfied.

Great video! I've been using my Dual 1229 since the early '70s. I had Bill service it about ten years ago and It's still working flawlessly.

I enjoyed your interview with Bill. Looking forward to more of your channel regards Stuart from 🇿🇦

Love this. Could listen to Bill all day. I own several Dual tts and this is very informative.

Great interview. It´s really a nice hobby. In addition to a modern and stylish Pro-Ject I still own the Dual CS 721 and 731q fully automatic turntables from my parents. Still run smooth, some greese, some new wear parts every other year (or decade) and I think they will run for another 40 years. Not the prettiest cases but can be replaced thought.

That was a lot of fun. I have had a bunch of newer turntables and just got a reconditioned 701 a few months ago, and paired it with a Shure v15 v5MR. Wow. I could not be happier. I don’t think I will ever get rid of this table. Really enjoyed listing to Bill’s passion for Dual.

Really enjoyed to listen to you an Bill all the way through. What a likable and down-to-earth fellow he is. And nice to see an Edison Diamond Disc on the shelf behind.

I was a musician who worked in sales and tech work at stereo stores. I bought several brands of turntables. In 2023 I still own a Dual 701 works great but I have also a Linn Sondek LP-12. I love the 701. Both have stood the test of time. As a dealer I got a tour of the Linn factory all paid for. If I could have only one turntable it would be my Dual 701.

Really enjoyed this. I own a few Duals, 604, 1019, 1218, 1219 and 1229. It's nice to hear him share his appreciation for Dual brand turntable. Many audio snobs don't appreciate these and tend to dismiss them. too bad for them! I'm with Bill, I'm sold on them!

Could listen for hours to this man! Great format!

WOW, This interview is amazing. Please do more with people like Bill.

I bought a 701 from Mr. Newman and have been very happy with this table. I'm so glad I discovered Dual and Mr. newman.

Duals are fascinating decks because mechanically they bear some hallmarks of lower end decks like record changers and yet they run like Swiss clocks, have very good specs and sonically are up there with some much more expensive turntables. I have just spent a year slowly nursing a sick 505-1 back to health. It took so long partly because I never wanted to disconnect it to go on the bench as I was enjoying the music too much!

This was fun. Had my 1229Q worked on by Bill after it was damaged in a move (forgot to remove the platter off the chassis). Works as new now and is so satisfying to use. Thank you.

Nice interview. As an owner of a few Duals, I can testify their build quality is second to none. My one 1229 my father bought in 71 I believe. Still runs like new. I was taught at a young age how to maintain it. 50 years later and I still use it as my main, with the original Shure M91. Also have a 1229Q and 1249.

Good afternoon from West Michigan (near Grand Rapids...). I'm so glad I found this conversation regarding Dual Turntables. I still have my 1229 from the early 70"s. Works great-sounds super. I learned a lot and I appreciate Bill's "passion." Thank you both so much! Now I'm heading over to his website...

Thank you, this walk down memory lane is always appreciated!

Awesome, Just picked up a 1229 and listening to Bill talk about the quality of these have got got me fired up! Thanks

Hervorragend! Bill Newman sprach mir wirklich Wort für Wort, Satz für Satz, aus der Seele!

Fix My Dual fixed my Dual 721, and supplied a very nice replacement plinth. Thanks, nice to meet you.

Wonderful video, Kevin and Bill! My CS 406 is still going strong after 43 years. And now, I am motivated to get all my other 8 or 9 Duals in rotation again! Particularly my CS 7000 Golden One. Cheers!

For better or for worse I’m a big Dual fan have been my whole life I guess because my father was. This was a real treat god I wish there where more Bill’s in the world. I am fortunate enough to have a shop in town that I’ve been dealing with for over 30 years and they have an old wizard that has done his magic on my tables for years but sadly I think he’s going to be retiring soon somebody needs to pass on the knowledge!

Wow!!! Superb! You are doing a fantastic job!

Outstanding interview, enjoyed it Immensely. Just talked with Bill today about getting my 721 serviced.

I’m an owner of a 1246. I agree with Bill, it’s fun watching them operate.

This is very well done with its different camera angles/shots, audio (ofc) , and topics discussed with Bill. Hope to listen/watch more like this one!

I Really enjoyed this coffee talk and happen to have a 1226 in my collection!

Just went thru Dual video. Fantastic. Thx. Such a relaxing and informative discussion.I think its easy to recognize when folks have the same love of the vintage stereo equipment and its intrinsic value. It has always been more than a personal life enhancement for me , passion for the great equipment and vintage sound started for me at ’Alterman Audio’ in new orleans. Sometimes i feel like my love of the hobby is unique in its mix of equipment , playing medium, and what i play. It feels like there is a balance in the listening experience with vintage equipment. My first turntable was a dual 1249 with Shure v15 type 3. I played on my 1970’s pioneer sx 727 and polk speakers. Years of joy. Thx for you channel and keep doing interviews.

I bought a new 1019 in 1967 while I was a junior in college. I still have it today in mint condition. FixMyDual overhauled it ten years ago and it still an amazing piece of equipment. Bill also overhauled my 1229Q. Back in 67 the main competitor was the Garrard Lab 80. Just visually, the Garrard was absolutely inferior. I made the right choices. Thanks Bill!

You guys are lucky that you have Bill right there with you.I live in Manila and I have 4 Duals that need servicing and now that I watched your interview with the man.... how I wish I can get his service.Anyway,I enjoyed your video.Thank you.

I worked at a small stereo shop as a teenager and bought a 701 when my boss got a few at a special price. I always liked the gimbal tonearm mount. I had no idea where the 701 stood in Dual's product line up, I just loved it all these years. Having stumbled across Skylab's KZfaq videos and now being introduced to Bill and talking to him briefly I will be driving my 701 to his shop for some well deserved TLC and stopping by Skylab's place as well.

Awesome video ! So much info ! Now I want a 701 !!! I was one of those people from the 70's who spent 1/3rd of my salary for a system !!! Good channel, great topics ! Thank you, KUDOS 👍

Fantastic interview....really enjoyed every second with Bill Neumann. I myself have been stuck with the Dual 704 DD with V15 Typ III for many years. Thanks to Skylabs Audio for the great video

Great interview! thanks to you and Bill for this video.

Great interview listening to the history from the expert, thanks

What a wonderful and informative conversation. Bill is obviously "the man" when it comes to DUAL turntables, a plethora of knowledge and wisdom. Thanks so much Kevin for this interview and also making myself and others aware of Bill and his company. It would be great to see more content similar to this with one of your technicians or something that goes over repairs. Love the channel!

Super engaging to hear this chat. Would love more interviews like this.

Great all around.

My intro to HiFi was taking my dual to skylabs and them recommending me to Bill! love this community

Just bought used Dual CS-731Q, and slowly fixing all the little problems with it. Having luck with it at the moment. Opened it up.. Absolute ridiculous electronic overkill! 4 boards inside, I'm loving it. Actually i like Dual because they give you gauges and adapters so you need never to use protractor tool when changing cartridges. Dual forever, my friends! Unfortunately I'm in Croatia, can't send it to Bill... But it's nice to know there are company out there which you can count on to fix your TT...

That was a great video. Bill truly is a master of his craft. Makes me want a Dual TT. I just wish you guys would remember that Crosley is truly an entry product. Hell, my wife got me an all-in-one Crosley in 2015 in she would tell you it was her biggest regret. I've now gone through over 10 different tables with more stylus upgrades that I care to say and love the hobby tremendously. But it all started with a Crosley and probably for more people than you think. Love the Channel.

I was amused by the Thorens story using the Disc Washer. I have owned Thorens turntables for over 40 years and have always used Disc Washer. I learned right from the start that no pressure is needed. Very entertaining story, I enjoyed watching this video.

“I am a mechanic.” This is what I love about Duals. I have fixed up a couple of 510s. The belt-driven pitch change mechanism is genius! It is really an early example of the continuous variable transmission. Change the size of the pulley; change the speed. No electronics needed. Such a creative solution! I’m selling my Thorens. I have a good line on a Dual 701. No fear trying to repair it, but if I fail, FMD might be getting a call!