Another great video! Mine are busted. I was looking at them a couple of months ago when i was greasing the truck. And now I know how to fix them. Thank you!
@bustedknucklebydieseldr32282 жыл бұрын
Glad this came in handy. Hopefully the same with the other vids on this channel. Appreciate you watching and your support.
@thereviewer4173 Жыл бұрын
Good content and very educational.
@mechpilot72 жыл бұрын
Ok the hot dog animation tho 🤣🤣
@WestTexasDieseldog2 жыл бұрын
Just came across your videos, great job!!!
@bustedknucklebydieseldr32282 жыл бұрын
Appreciate the positive feedback. Hope these come in handy when it comes to DIY savings or just new knowledge.
@jadb84522 жыл бұрын
always got good info. happy thanksgiving brother
@bustedknucklebydieseldr32282 жыл бұрын
Thanks for the positive feedback. Have a happy holidays
@cumminsMoney2 жыл бұрын
Thanks for the info .. back to where’s the EGr it’s connected to the egr cooler
@bustedknucklebydieseldr32282 жыл бұрын
You almost got it. Egr cooler is connected to a hot cross over pipe to the center section of the exh manifold. In that center section is the valve. An all in one you could say. Im gna stick with thats 20 push ups for you..
@dylanbailey84642 жыл бұрын
Great video as always, I didn't even know those boots came off! Is this repair possible on any conventional slack adjusters?
@bustedknucklebydieseldr32282 жыл бұрын
Thanks for watching. Yes they should all have a grease boot to help hold that grease in so they should all be very similar.
@rickydeshais2 жыл бұрын
Good to know thank you
@CashNYC2 жыл бұрын
I always thought u had to replace the whole slack adjuster if the rubber is busted out.
@bustedknucklebydieseldr32282 жыл бұрын
Glad this vid came in handy and put some knowledge out there. Most people dont replace the grease boot,but if its still good than might as well save some $$..Appreciate you watching.
@corybowen19237 ай бұрын
Where do you get the boot replacements from ?
@bustedknucklebydieseldr32287 ай бұрын
You can find them at any local dealer, Amazon , eBay,Meritor site, possibly and fleet parts stores.
@sofistk8ddd1 Жыл бұрын
You have any tips or suggestions for making a standing room bay like this one? I will be building one, are there kits that a company sells or just need to have an expert grading company and concrete company to pour the shape for someone to stand in?
@bustedknucklebydieseldr3228 Жыл бұрын
Unfortunately I do not. Gta ask around for quotes on a dig and concrete. No matter what its gna be pricey.
@amritmattu5024 Жыл бұрын
Are they the same for the steer as well or they different
@bustedknucklebydieseldr3228 Жыл бұрын
They will be different
@vincentstanley682 жыл бұрын
Guru, i have a 15 cascadia with a dd13. I have spn 4357 fmi 5 come and go. The diagnostics menu of the truck says dpf electrical issue. Can you give me any guidance as what to look for? Thank you and i apologize if im asking this question at the wrong place.
@bustedknucklebydieseldr32282 жыл бұрын
Guru, I like that. I’ll take it. Much better than grease monkey. So with that code I should have a video on it. It has to do with the def line heater #4. 4 and 5 go to the def doser on your atd one box. The usual is rubbed through wire and or corrosion on the def heater connector wires. I would pull back the heat shielding were they connect to the def doser and inspect for any issues. If none I would check for voltage between 2-ground= should be 12v. 1-ground should be 2.5ish volts. If voltage looks good than you got a bad heater line and it will need replacement. Hope that helps and your good with a multimeter. Have a happy holidays.
@tubeup2 жыл бұрын
Can you do the same thing with a 2012 Volvo VNL ?
@bustedknucklebydieseldr32282 жыл бұрын
Great question and yes you can with all the models.
@edgaryescas55354 ай бұрын
Where did you buy the grease boot?
@bustedknucklebydieseldr32284 ай бұрын
Grease boots can be bought online and at any truck parts shop or at your local dealer.
@corybowen19237 ай бұрын
Never mind I should have watched the whole video first 🤦🏽♂️
@sleazeballpeter Жыл бұрын
What are these tools you are using?
@bustedknucklebydieseldr3228 Жыл бұрын
Slack adjuster tool is the name of them.
@sleazeballpeter Жыл бұрын
@bustedknucklebydieseldr3228 I figured it out, thanks for the reply
@zephyteh26282 жыл бұрын
subscribed
@bustedknucklebydieseldr32282 жыл бұрын
Appreciate your support
@zephyteh26282 жыл бұрын
@@bustedknucklebydieseldr3228 can you pls make a hanger bearing and steering draglink replacement video
@bustedknucklebydieseldr32282 жыл бұрын
@@zephyteh2628 great idea’s. I have one on the carrier bearing if that’s what you mean. And don’t have one on a drag link yet.
@zephyteh26282 жыл бұрын
@@bustedknucklebydieseldr3228 ok thanks. Can you also go through a detailed dot inspection
@tittat24402 жыл бұрын
Checked with fri*ghtliner on these boots 2014 cascadia they said needed to buy the whole slack adjuster any idea where i can get the boots
@bustedknucklebydieseldr32282 жыл бұрын
I get mine from the local dealer, they might not of had any in stock at the time. But also do a quick search online and I’m sure they’ll come up with some readily available.
@sandeepdhot19482 жыл бұрын
Where I can buy these boots
@bustedknucklebydieseldr32282 жыл бұрын
Any online parts distribution wherehouse or dealer would carry them.