Slickest SATIN BLACK paint for accent panels!

Slickest SATIN BLACK paint for accent panels! | RAD20

Рет қаралды 35,747

3 жыл бұрын

The Mustang is finishing up the paint work, with a satin black roof and trunk panel. It came out great and easy to spray! Enjoy...
Product used: UreChem Slickphlats 2K Low Gloss Urethane
(I would highly recommend this stuff!)
If you have any questions, comments, or recommendations, feel free to comment below
THANK YOU EVERYONE THAT IS WATCHING AND HELPING ME GROW MY CHANNEL!
Please support the channel and subscribe!
#mustang #bodywork #refinedautodesigns
Follow in IG: refinedautodesigns
Music-
Free HARD Bass Beat - No Copyright (Prod. BeatsByExergon)

Пікірлер: 57

@reloaded1880 3 жыл бұрын

Coming together! The satin black looks perfect

@refinedautodesigns 3 жыл бұрын

Assembly starting....light at the end of the tunnel!

@lawr3nc3mann84 2 жыл бұрын

this helped alot...thanks. two door tahoe project. top gloss bottom satin.

@focusinc4266 Жыл бұрын

well done ...I'm going the opposite with a 2door tahoe. I may just order this to try b4 finally pulling into paint booth

@mcgbeats2107 3 жыл бұрын

I’m all in for this type of content you’re doing an amazing work never stop uploading!

@Grant7 3 жыл бұрын

Nice work

@randyhobbs2810 3 жыл бұрын

The satin fits the look very well

@refinedautodesigns 3 жыл бұрын

Thanks Randy

@ryanbland628 3 жыл бұрын

I love that wire trick for the moldings. But all I can think about watching is having to buff those cars with that exhaust fan blasting them with over spray lol

@refinedautodesigns 3 жыл бұрын

You'll be surprised how much the furnace filters caught....but I wouldn't do it if they were newer cars. Lol The trick is to keep them filthy so the overspray sticks to the dirt!

@TXGRunner 3 жыл бұрын

@@refinedautodesigns my dad painted his Alfa in the garage back in 1972 (I was 4), and we still find boxes and tools with green overspray.

@tomsmk3 3 ай бұрын

Just wondering did any of that over spray get on the two cars outside the garage

@refinedautodesigns 3 ай бұрын

No. They had a protective layer of dirt

@jgerman7580 3 жыл бұрын

Did you use any sort of clear coat or is it not required for this paint?

@refinedautodesigns 3 жыл бұрын

No clear. It's a 1 stage urethane

@arunsharma7776 2 жыл бұрын

Is this product available in online platforms? So that I could buy them. ❤️👍🏽 By the way great job brother do more.

@refinedautodesigns 2 жыл бұрын

I order from UreChem Paint direct from their site. Should come up first on Google. Don't remember the website

@3nocks137 Жыл бұрын

Love it! Can you please comment the exact link to this product?

@refinedautodesigns Жыл бұрын

www.urechem-paints.com/color-systems/

@gilmarrero5966 3 жыл бұрын

Nice job ! cant what to paint my mazda b2200 truck satin black

@refinedautodesigns 3 жыл бұрын

Thanks! Good luck with it. My advice is super even coats. Wetness effects gloss. Stripes suck

@gilmarrero5966 3 жыл бұрын

@@refinedautodesigns what kind of gun and tip should i use ??

@refinedautodesigns 3 жыл бұрын

@@gilmarrero5966 depends on how you spray. Everyone has their own way. I used a devilbiss prolite with a 1.3

@gilmarrero5966 3 жыл бұрын

@@refinedautodesigns so i dont tack coat it let it flash and then spray alittle mire heavy let it tack and then the final coat i never worked with satin black or matte black

@refinedautodesigns 3 жыл бұрын

@@gilmarrero5966 I would do 1 medium wet coat. Let flash. Then 1 full wet coat. This will give you the required mil thickness.

@cristianbarata6055 Жыл бұрын

This doesnt need a finsihing coat? Does it do well against uv?

@refinedautodesigns Жыл бұрын

They call it a 2k urethane single stage topcoat. No clear over it. It's not base coat. Has uv protection like clear coat. Hope it helps

@jeremythevirushuang6303 2 жыл бұрын

This was great. So why did you stop loading content?

@refinedautodesigns 2 жыл бұрын

Thanks. Yeah my car was done and got busy with other house stuff. I'm old and have other responsibilities lol. Hopefully more coming soon or at least an update

@6rubis 3 жыл бұрын

What was the psi range to paint the satin black.

@refinedautodesigns 3 жыл бұрын

I sprayed it at 30-35psi. Wanted it as atomized as possible. Sprayed like a thin clear. Must be super even with a lot of overlap to prevent uneven gloss stripes. Hope it helps

@6rubis 3 жыл бұрын

@@refinedautodesigns cool thanks nice job by the way

@mditani 3 жыл бұрын

At least you tried something no body tried it before. You'll see satin car but wrapping not proper paint. I like it. Well done mate.

@syahmizack5651 2 жыл бұрын

what is the hexcode for the satin black

@refinedautodesigns 2 жыл бұрын

Better question for the manufacturer...

@tristantopambudi3186 11 ай бұрын

Don't you need laquer on satin black?

@refinedautodesigns 11 ай бұрын

No. It's urethane single stage paint with flattening agents.

@fordnut4914 3 жыл бұрын

Did you clear coat it or is it just paint.?

@refinedautodesigns 3 жыл бұрын

No clear. It's a one step satin urethane. Has UV protection

@mitchellferre1652 Жыл бұрын

Can this paint be waxed once it is cured ?

@refinedautodesigns Жыл бұрын

I ceramic sprayed it. Looks the same. Water beads like crazy.

@cbrown4440 2 жыл бұрын

Nice & wich paint gun do you use?

@refinedautodesigns 2 жыл бұрын

Devilbiss GTI pro 1.3mm tip

@browntacks708 2 жыл бұрын

Thx😎

@ElCineHefe 10 ай бұрын

Ever try John Deere Blitz Black?

@refinedautodesigns 10 ай бұрын

Nope. Is that single stage enamel? Must be durable

@ElCineHefe 10 ай бұрын

@refinedautodesigns I used a rattle can on a motorcycle. It's a satin black that looks a lot like Harkey-Davidson's Black Denim. It still looks good almost 10 years later.