Slider-crank mechanism for adjusting stroke position 1

No video

Slider-crank mechanism for adjusting stroke position 1

Рет қаралды 190,515

Күн бұрын

Input: pink crankshaft.
Output: blue slider linearly reciprocating.
Turn yellow screw to alter length of the assembly conrod (yellow screw, green bush and violet nut) for adjusting stroke position of the blue slider.
The violet nut is for fixing the conrod members together after adjusting.
STEP files of this video:
www.mediafire.c...
Inventor files of this video:
www.mediafire.c...

Пікірлер: 16

@Mechanical_machinery 9 ай бұрын

Perfect 👍

@robinramos2740 Жыл бұрын

its a great concept for making a mechanical hammer good for making best swords....

@sergeybabuka1800 3 жыл бұрын

на небольшое усилие пойдет , на большое усилие делают эксцентрик

@georgel4807 5 жыл бұрын

Hy, i wanna make a project and i want to make a press from this slider crank, can you give me an idea what could i press?

@thang010146 5 жыл бұрын

Pressing steel sheet as shown in kzfaq.info/get/bejne/h9Zdh6mUy9G3emQ.html

@alexsetyapranarka9191 3 жыл бұрын

Pressing Logo for your product.

@darthvader4899 5 жыл бұрын

which software are you using

@thang010146 5 жыл бұрын

It's Autodesk Inventor.

@parthpandey4631 5 жыл бұрын

Can you give step file for this mechanism?

@thang010146 5 жыл бұрын

Link to download the STEP files is now in the video description.

@armenbagdasarian3827 9 жыл бұрын

этот метод пойдет на долбёжный стонок

@thang010146 9 жыл бұрын

Possible but not good because this mechanism gives a same speed for both down and up strokes whle a slotter needs slow down stroke and quick up stroke.

@tonytee.1864 3 жыл бұрын

this doesn't change the stroke! If this was a internal combustion engine, it would only change the compression! The stroke remains the same.......

@thang010146 3 жыл бұрын

Yes. It is for adjusting the stroke position as indicated the video title.

@tonytee.1864 3 жыл бұрын

@@thang010146 No it doesn't! The stroke refers to the throw of the crankshaft. If you have 35mm from centerline of the crankshaft to the centerline of the connecting rod. That equals a 70mm stroke! Changing the connecting rod length does not change the stroke! What you are doing is changing the length of the connecting rod. The stroke us still the same = 70 mm. Top dead center to bottom dead center is still 70mm no matter how long your connecting rod is..

@thang010146 3 жыл бұрын

@@tonytee.1864 Yes. The stroke is not changed but its position is changed. For example: - Before adjustment the slider move from A to B. AB = 70 mm - After adjustment the slider moves from C to D. CD = 70 mm but CD is lower than AB.