Can-Am Ryker Replacement LED Headlight Assembly (Set of 2)

Рет қаралды 24,393

3 жыл бұрын

🛒Can-Am Ryker Replacement LED Headlight Assembly available here: www.slingmods.com/canam-ryker...
🛒Can-Am Ryker Front Fender Accessory Power Harness available here: www.slingmods.com/canam-ryker...
If you're not diggin' the light output of the factory yellow halogen bulbs that came equipped on your Can-Am Ryker, or you are just looking to take the front end of your Ryker to another level, then we have something really special for you today.
Introducing our Replacement LED Headlight Kit for the Can-am Ryker & Ryker Rally. These replacement headlights have an IP67 waterproof rating and have been cast specifically for the Can-Am Ryker as a direct OE replacement. Each housing features a polycarbonate lens for optical clarity, as well as an aluminum housing with integrated heat sinks for quick heat dissipation. And of course to keep things in proper Slingmods fashion, this mod is 100% bolt-on and 100% plug n play, thanks to our friends over at TricLED.
Now these are more than just replacement headlight housings. They also feature integrated white LED running lights, as well as turn signal functionality enhancing your presence while out on the open road. However, the real star of the show here is the headlight output. While the low beams are 2640 lumens, the high beams kick out 4020 lumens, emitting a bright white 6k light output on the kelvin scale. The illumination of these headlights vs stock is literally night and day, it's actually slightly embarrassing for the stock bulbs.

Пікірлер: 54

@Slingmods Жыл бұрын

🛒Can-Am Ryker Replacement LED Headlight Assembly available here: www.slingmods.com/canam-ryker-replacement-led-headlight-assembly-drl-turn-signals 🛒Can-Am Ryker Front Fender Accessory Power Harness available here: www.slingmods.com/canam-ryker-front-fender-power-harness

@markxhernandez 2 жыл бұрын

These headlights were the first of several mods I installed on my Ryker Sport. Love them!

@Slingmods 2 жыл бұрын

Awesome Mark! Glad to hear it.

@RollingOn3 3 жыл бұрын

Insane upgrade

@GRIM_MOD 3 жыл бұрын

Def getting these!

@sheliabenson5496 3 жыл бұрын

Already upgraded to LED lights. Love the brighter light at night..

@chrisjackson5107 3 жыл бұрын

Damn that’s a big difference wow….drivers going to definitely be mad when I’m behind them they gone think I got my higher beams on😬😬😬💪🏾💪🏾💪🏾💯💯💯oh well

@shanebarrett3996 2 ай бұрын

Love them, but i wish i could turn daytime running lights on alone. At night i can tell im blinding everyone oncoming

@hamsandwich387 3 жыл бұрын

First batch coming in September......🤤🤤

@jcf9688 2 жыл бұрын

hello all right I follow your videos and that in Europe we don't have the extras that appear in your videos and very interesting

@burn1gotbeats 3 жыл бұрын

🔥😎

@N254NK 3 жыл бұрын

Can am scored with the ryker product...am betting my stocks that it will be the first in their line to go full electric.

@SuperAndrey33 Жыл бұрын

Okay so it requires then harnes installed in order for the turn signals to work. Where exactly is the headlight part plugs in for the turn signals also do i need all those wires?

@RonConsumer 3 жыл бұрын

Me likey... damn another pre-order... LOL

@Slingmods 3 жыл бұрын

Lol. Yeah man.. but an awesome mod for sure. One of my favorites for the Ryker so far.

@jeffstinson614 2 ай бұрын

I installed these recently and love the look and output. They provide great visibility at night. The only thing I haven't been able to figure out is how to adjust the direction. Mine seem to be aimed a little too high when on low beam. I've looked at the housing and don't see any adjustment options for either low or high beam. Am I missing something?

@shanebarrett3996 2 ай бұрын

Same thing with mine, most ppl think I have my high beams on.

@aftershock2000 3 жыл бұрын

man where the love for the Spyder line? would love to see this on the f3

@Slingmods 3 жыл бұрын

We start with mods for the Ryker and transition into the Spyder as the demand for Ryker products is greater than Spyder. We have something similar coming for the F3 and RT models as well.. but it's several months out.

@spyderlyf3 2 жыл бұрын

I just got the Spyder version today. Nice solid product. I just need to figure out where the random red wire goes, but it's all plug and play.

@aftershock2000 2 жыл бұрын

@@spyderlyf3 It’s probably for the switch back for the turn signals to make the light turn yellow

@spyderlyf3 2 жыл бұрын

@@aftershock2000 I pulled everything out the box. It plugs back into the light harness probably from the turn signal. I'm sure it will make sense once I pull the spyder apart. I've been waiting on a kit like this. Nice and clean light setup to make spyder look more like the new RT light setup, but better IMO.

@JuniorJr_23 2 жыл бұрын

Nice. How do you have the daytime running lights on by itself?

@Slingmods 2 жыл бұрын

You can only do that when the engine is off.

@zpakk4499 3 жыл бұрын

Love these lights! If I purchase the Harness, but already have the sequential fender lights, is there any way to install these new headlights using the harness without go through the full fender removal installation process for the power harness?

@Slingmods 3 жыл бұрын

Hello Z, unfortunately you'll need to remove the front fenders to install the 1:2 front fender harness as it needs to pull power off of that front fender tip light. Once it's done though, you'll have plug n play access to all future single and dual color lighting mods. Thx for watching.

@VinCode17 2 жыл бұрын

I have the same issue I have previously install the sequential turn signals so for me to take those off and have to replace the tape becomes more work then plug and play. Wish they would send replace tape for these sequential and make it worth you while. Did you order a set?

@zpakk4499 2 жыл бұрын

@@VinCode17 you don’t have to remove the lights, just the whole fender. That’s what I was trying to avoid.

@VinCode17 2 жыл бұрын

@@zpakk4499 the fender is easy, from my understanding you have to pull the tip light back out to hook up the harness. Thats what i understood.

@zpakk4499 2 жыл бұрын

@@VinCode17 you do, but the previous installation of the sequential lights is not disturbed but this process.

@riskfactor3171 2 жыл бұрын

Just ordered a set of these and have a couple of questions. 1. How do you get just the eyebrow DRLs to illuminate and not the headlights as demo'd in the video? Stock headlights are always on, with the only option being lowbeams and highbeams...so how does this third option (DRL only) work? 2. If I also order the dual color front fender light strips, is any additional wiring harness necessary beyond the extra kit needed to install these? Really want to improve front and rear visibility, and think these two options would do the trick, provided that they can actually be installed together. 3. I know its a different product, but do the white LEDs on the dual color front fender lights match the white color of the OEM fender lights and these headlight replacements?

@Slingmods 2 жыл бұрын

1. You can't run just the eyebrow's when the engine is on. The shots in the video with just the eyebrows is with the ignition on, but engine off. 2. You will need the 1:2 Front Fender Power Harness. This will give you the power for both the Eyebrow portion of the headlights and the fender lighting strips. That can be found here: www.slingmods.com/canam-ryker-front-fender-power-harness Once installed, you'll have a power harness down by the a-arms for future expansion of our single and dual color lighting applications. 3. All of the products we sell featuring white LED's are the same light output of 6000k on the Kelvin scale.

@riskfactor3171 2 жыл бұрын

@@Slingmods Thanks for the clarifications. I did include the harness in my order, so hopefully should be good to go...will order a set of the fender strips today. Hopefully these come in soon...the stock lowbeams are practically useless!

@Slingmods 2 жыл бұрын

Yeah.. they really are. If you ride at night.. you're gonna love the new headlights. They're crazy bright. Thanks for the support.

@marcusjackson7294 2 жыл бұрын

Where are this versions for the can am spider F3 we don't get any???

@Slingmods 2 жыл бұрын

Hello Marcus, I just received the prototypes last week actually. We'll be doing the video on the F3 version in the upcoming weeks. They look awesome! Thanks!

@fafulin5954 3 жыл бұрын

what track is playing in the background

@Slingmods 3 жыл бұрын

"Future" By "AlterEgo"

@doccouncil6637 2 жыл бұрын

I followed all of the steps but my turn signals don’t work.

@Slingmods 2 жыл бұрын

Hello Doc, if you would be so kind as to create a support ticket, our customer service team will help you resolve this issue. You can submit your ticket here: www.slingmods.com/index.php?route=information/contact Thank you!

@keycurt Жыл бұрын

Where’s the installation video for the wire harness

@danielkinsner2532 Жыл бұрын

kzfaq.info/get/bejne/fbuqesuQvbDVcqs.html

@Slingmods Жыл бұрын

kzfaq.info/get/bejne/fbuqesuQvbDVcqs.html

@lybertyman8154 Жыл бұрын

🤟♥️🌎🙂👍👋👋🇨🇵

@chrisjackson5107 3 жыл бұрын

Only thing that gets me is it be so many wires plus the harness I have so many from hooking up my LEDs already 😬😬😬😂😂😂

@Slingmods 3 жыл бұрын

Yeah for sure. So we have two plug n play locations for lighting. If it's a "dual color" LED like this one, it needs to go the front fender power harness. If it's a "single" color LED, like our front grille lights, you can go to the 12v accessory port underneath the left upper fairing. If you've maxed out those locations, you'd need to add our 12v aftermarket accessory fuse block. This will give you independently fused circuits for each additional 12v lighting mod.

@chrisjackson5107 3 жыл бұрын

Thank you for this info will order 💪🏾💪🏾🙏🏾🙏🏾