Of all the videos I have watched on upholstering furniture this one makes the most sense to me.

Nice job. I have two tips to keep it tight fitting. one is velcro sewn to to the IA/OA seam with a velco just rough hand sewn to the chair to recieve it. the other is to cut 3 fat dowels that will push into the IA and IB that meet with the deck/seat. then make a pocket with a long tail for dowels to fit. squash them in there. then you have a "tack rail" that you can pin to and machine as normal. it gives a great fit and almost eliminates the loose cover look when used. also reduces kick pleats sagging when sat on.

WOW!!! You are Over-And-Above, Absolutely, Without A Doubt, Honestly-And-Sincerely, a Queen Among Upholsters!!😊😊😊❤❤❤❤ In one video, you have taken AT LEAST 30 years of me never making a slipcover because i knew if i tried (and i did) all i would do is waste beautiful fabric, and just thrown that disastrous thought of Never making a slipcover and all my private angst about ever trying again, not only iut the window, but out of this solar system! The word AMAZING is not large enough for you. Genius comes closer, but it just pales in comparison to all you are. I sound ridiculous, but I'm serious. NOBODY ever suggested or used your method and I am blown away. You madeit look so simple, so perfectly easy, that i sat here and watched what for you was straightforward, like pouring out a glass of water. The last time i tried, on avery simple wingback chair, I ended up sewing the seam at the top of the chair to the side panel for one wing. The time before that, i ended up tearing both the seams where the arm and the back meet. The time before THAT...well, the stupid goes oon and on. Each time a disaster and then making a quilt out of a beautiful fabric. Ive cut too close, ripped fabric, sewn one piece to the wrong piece. All the videos, al. The upholsfery classes, and i find myself wishing fervently that you had made this video 30 years (and soooo much frustration 30 years ago. Your approach, your method, doesnt use a slide rule or trigonometry to achieve a great slipcover and a great fit, just common sense. By golly, you gave me hope and courage to try again and using your method, i can see EASILY that even a chair ( or sofa) with a bewildering number of angles that needed a couple hundred miles of welting can be easily done. And i could even add embellishments. I wil Sacrifice, in your honor, a Kentucky Fried Chicken...I will dance at your weddin'....i will erect a statue to your greatness in the park...and thanks to you, i now will go make a slipcover for everything in my house except that one tiny mouse i cant catch. For your wonderful instruction , again, i thank you, from the depths of my soul, i honor your wisdom and i am soooo glad you made a video for the likes of us Upholstery-Challenged wimps!😂❤❤❤❤❤❤

Thank you for the video! I did a slip cover using your tutorial, and it worked very well. Mine isn't nearly as lovely as yours, but much better than I expected, and was easily able to adapt your instructions to my chair. You are a wonderful instructor.

Loved it! Thank you! it's the first tutorial where you can start at the front, often the most difficult area. AND you had your piping ready, something that is often left to the end. And I loved the idea of a zipper too. Now I am less afraid of trying it. Greetings from Australia.

Wow, the way you do that cording is a huge help! You make this look so easy -- and I know it is not . . . lol! Thank you!! I am heading out tomorrow to find a beauty salon chair hydraulic bottom! What a great back saver.

gorgeous and simple

Ficou muito lindo! Acabamento perfeito! Parabéns!

I've been struggling for months now whether to reupholstered my couch or make a slipcover. I'm so pleased I found you! After watching your informative video, slipcover it is. Thank you for taking the time to explain in detail all the steps involved.

I used your method for creating a slipcover for my slipper chair. Your instructions really made total sense to me. I wish I could post a picture. I'm really pleased with the outcome. Thanks so much!!!

Thank you for teach me a lot of technic.It was perfect job covering.

Há três anos vendo seu vídeo, fiz a capa do meu sofá. A sua simpatia me encorajou Obrigada.

Thank you very much for all the progress l have learned form you a lot of my best wishes to you 🌸👌👍👍👍👍

your slip cover video is very beautiful i love swing room crafting and different pillow cover tutorial

Espectacular trabajo, muy bonito la felicito

Beautifully done.

the slipcover turned out so well. very cute with the flippy skirt. good job.

Thanks for sharing! I love it!❤️ Easy to follow. I will try to make for my couch.

I have learned so much you! You truly are the best teacher! Thank you!

adorei! ficou lindo!

Really cool! I feel much less intimidated now, but I'm sure you make it look easier with your expertise. Thanks for the video!

You simplified the process really well TFS.

You got me excited!!! Love this video! Thank you!

congratulation!! i like your method the best especialy the cordon thanks a lot

I am understanding sewing slip covers so much better now and am looking forward to sewing one!

This is very helpful. I have a couple of chairs I need to do slip covers for. I think I can accomplish it after seeing your video. 😄

Outstanding! Excellent video.

Wow! Amazing work, thanks for sharing n guiding in an easy way God bless u love u Bye.

Excelente trabajo. Muy práctico. Gracias por compartirlo!! 😁

This is most helpful and encouraging! Thanks for posting such a well-produced video.

hermoso tutorial gracias por compartie

You make it so, so easy to understand! Thank-you.

This demo is very good. I have just watched 4 others and your is the best for me.

You are a great teacher. Thank you.

Thank you for the video, very easy to understand!

Kim, your videos are always easy to watch and follow. I've done one slipcover following your videos, and will be doing another after taking your slipcover course!

Wow! You make this looks so easy~! You must have made hundreds. Lovely job of it too. What a dream machine you have there. Nice zipper job without using a zipper foot. I didn't understand how you did it w/o the zipper foot. REally liked watching you do this. Thanks!

That was an excellent slip cover tutorial. I can do it now with more confidence. Great job. Thank you.

Wonderful. You make it look so easy.

This is the ONLY video I've seen that shows the slipcover coming off and going on Thank you so much

Very well done.

Me encanta esta muy bien explicado

Muito bom seus trabalhos.

VERY GOOD, FELICIDADES BIEN EXPLICADO MUCHAS GRACIAS

You are very talented- It turned out excellent- That was a lot of work

Fantastica...eres un fenomeno. Me ha encantado tu trabajo!

Just wow

excellent,

EXCELENTE TRABAJO GRACIAS !!!!!!!!!!!!!!

Great video. Presentation A+, Visual A+, Voiceover A+. I was so pleased to come across this as it gives simple instructions that I can follow and made it look doable. Presented in a voice that is easy to listen to and and all round view of what is to be done. Thank you.

Perfeito amei, ficou lindo,😘

Excellent, thank you. I am about to follow your instructions to the letter.

Gracias interesante el tutorial

I am in AWE! That is talent! Beautiful! Wish I could find someone in "the woodlands" Tx to do this

Great idea 💡

What a lot of work, you did a good job. I wanted to tackle mine but chickened out, didn't now how . But your video showed me and it's good to see how you did it. Thank you for sharing the information with us. You a e talented. I love doing things also.....👍🌹

Thanks for the tutorial 👏🏻👏🏻👏🏻

Its really appreciatable idea.thank u and go ahead

Thanks i am o impressed i love to learn more ❤

THANK YOU!!

Thanks for sharing! Awesome!

Great tutorial, thank you.

Thanks to your videos I could do my own slipcover even though I had no idea of what I was doing nor sewing, but made me feel confident and trust the process...and I could do it 👏💪😂 and I love the result

Parabéns,ficou perfeita! Eu gostaria muito de fazer uma roupa para meu sofá!

Beautiful

Wonderful

Excelente! Obrigada

Beautiful job 😍

Beautiful I like your work well done

Excelente muchas gracias

Excellent tutorial--thank you.

Lovely I will try this thanks❤❤

I need to do the same thing for my sofa by saving from dust.. really useful to me thank u ☺

excelente

would love to be able to do this, excellent lesson. I look forward to learning more from your videos. I have a friend who wants to reupholster over existing velvet barrel chairs. she mentioned a slip cover, I am hopeful now, but with slipcovers abundant on line, it would be wiser for her to just purchase from one of those sites.

This looks sooo amazing, very professional beautiful 😍

Very helpful! Thank you.

That was great thanks a lot

Muchas gracias el video esta bien explicado 😀

Great job Kim!❤️👏🏻👏🏻👏🏻

Gostei muito pelas dicas! Parabéns

Muito lindo vou fazer pra minha poltrona. Obrigada 🤗💗💙💗

Very good

Really very nice

thank you for the tutorial. it was easy to understand. and thank you for the discount for your class.

Looks nice

Exelente trabajo.👍👏🌹. gracias

This was VERY helpful to me. So well done. Thank yo so much and I'll let you know how MINE turns out.

Absolutely amazing

Hi Kim, Great video, thx. I have a version of the light you have attached to your Juki. Can you share the brand of the light? Thx

I love your videos.

You made this seem so straightforward and do-able, thank you. I will definitely have a go. Shame you didnt tell us about the seat cushion though (or did i miss it?!)

Muchas gracias por compartir lindo trabajo, quiero pedirte por favor que si no es mucha molestia que pongas los videos subtitulados en español. Muchas gracias

OMG you are a goddess! What a beautiful job. You made it look effortless. Am eternally grateful. Tq

I didn't see where you put the lower outer arm on. when its done I see a cord where the upper and lower arm meet. that is what I am trying to do but I dont get it

Well done, thanks.

So nice..Thank u for sharing ur ideas.. May i know what presserfoot you are using?

Thanks this is a tremendous help to me with my current project!

bonita tu forma de trabajar

It's very good