Open up the factory headlights and fog lights and color match them! Install some LED pods in there or projector style!

Is anyone ready to see it finished! Like me 😂😂😂

Take the valence off the bottom of the front bumper. My friends and I have done it on all of our trucks and Tahoe’s. It honestly changes the entire front end and makes it look so much better.

Most underrated KZfaqr

90% nonsense talk 7% energy drink commercial 3% actual content we want to see

Those headlights ruin the look but I already know u about to do something about that

Hey man i believe i saw you on 71 yesterday evening around 6 near Wilmington if that wasnt you then someone else in ohio has tahoe with the same taillights and everything😂

Got the bell notification and I didn’t waste any time at all clicking on it

Every video you make keeps me entertained. Not many youtubers I feel the same way about. Keep up the awesome build

10/10 content as usual what i would recommend doing or at least trying is tinting the fog lights and maybe the headlights as well ... just scuff up the headlights ,mix up some clear with a drop or two of black paint and spray away ... keep up the awesome work

This is gonna be such a sick build! Awesome company btw man👌🏽 💯

Absolutley killed it with that front end dangggg that looks gorgous

That looks nice Ryan. I think you should get some black rims.

been building my tahoe before u got yours and just lifted 3inch on 35's in the shop rn

the tahoe looks really good

I have a Tahoe also that I debadged and I’m currently in the process that your in. Adding black accents really do make a big difference.

Great job!!!!b Keep it coming. Just bought a new horn and new back up, headlight and fog light bulbs for my 2008 Hummer H3 :)

Tahoe is looking good with every little detail. Can you tint the headlights and fog lights? I have seen it done and it looks pretty good.

Hello, how beautiful is your truck? Seve fantastic. I would like to know where you got your lights. I am interested. I have a 2011 GMC Denali and I am changing many parts for black.

You should put rigid rock lights in the fog lamps but get them with the shroud/housing so it looks clean and like it belongs. Also please try and get the running boards back on, especially if you’re lifting it, they act as like a side skirt on these era trucks and just looks unfinished without them imo.

When we gettin the “looks so darn good” merch?

Thoughts on removing the red trim molding on the doors? Also maybe throw some 20ish percent tint on the fogs??? Cheap mod that will “eliminate” the chrome and I’m sure you have some 20% tint laying around you can use lol

The color of your Tahoe is called Crystal Red Tintcoat

It’s the little things that make the biggest difference! That’s what I’ve come to notice with all the different cars on my channel and how much I missed doing the little things!

Hey man can you please de-bage the sides of it but leave the tahoe part and the lt. just the smooth look from the side will look x10 better i promise. love the build. paint your break calibers too.

U sould get the black c shaped drl for it to match it takes alot of the chrome away from the front bc its a projector and if u want the hid kit is a size h7 for low and h1 for high beam

The badges look great. I wonder how it’d look if you made the bow tie red and the outline black

You also might be able to find a set of projector headlights that already have black bezels around them for your fog lights

Bro the front end looks absolutely killer!!!🔥

Bc of you and the little details that make your projects pop that is exactly how I do my build. I do the little things bc I know it pops and once’s it’s noticed it’s like wow that looks good. So I have to thank you for that!

Next time you do a Chevy badge just lay the masking tape all across and press it down. Then take a exacto blade and cut in the crease there and then peel the access off. Comes out 100 percent every single time

Flipping the colors on the bow tie would have looked great

Open the head lights up black it out or color match and add a projector in it and itll look awesome

Hey Ryan you should put some aftermarket bumpers on the Tahoe like you did the ram with some tow mirrors I think it will look aggressive

Caddy does have retractable running boards so I know you like OEM parts so you might wanna look into that. Not sure if it would work but I dont see why not they are both the can suv. Chris.

Z off-road 6000k black tint fog lights are killer, i have them on my 09 cummins and they’re super bright and have a super sleek look.. 10/10 recommend for the tahoe

On the chrome taking off with degreaser thing you tried, I think it’s only with a certain degreaser👌

You need to take them door bumpers off. Will look alot more sleek and clean looking.

Keep it up bro🤙🏼🤙🏼 loving the videos

The factory lights chrome is super thin and flakey so easy to remove where as the badge isn't do to the fact that the badge is meant to see weather and moisture so its thicker

I love how you turn vichles around and make them look better than what you find on a lot Keep up the great work man Love the videos

i did the same thing on my silverado bow tie except i had black with a white outline

I think that would color match really good with the 20-22” red and black tis rims wrapped in 35 iron mans

Glad to see this truck coming along

the Morimoto XB fog lights would look killer in there,but also around $200 bucks!

What size compressor do you use for your spray gun?

The front end looks sick!

You should try putting tint on the head lights lmfscrew did it on his Silverado if you want to see how it would look on the head lights

Damn the tahoe is looking bad ass I can't wait to see what happens next keep up the hard work

I like black grill better and every different signs black can't wait to see that Tahoe lift kits

I was gonna tell ya to get toredor red. Thats the same color as my 6.0p-stroke.. i knew it'd be a close look.

love these builds man🤟 you’re dope

Fire!!! 🥵🔥🔥 Absolutely love the black look.

15% tint would look sharp too

Had a package that was supposed to be delivered on the 11th and @ 1:45 am on the 11th it was in chillicothe then suddenly they changed the expected delivery to the 13th.

I'm wondering, can you tell if 6.7 Lime needs re-geared? I thought I heard you say that you could just tell... you could tell... you could definitely tell... that you could tell. Just wondering if you can tell man. Lol love the channel Ryan!

I don't know if you know this but they also make the bezels that light up

Diode Dynamics LED pods for the fogs, and yeah need to do something with those stock headlights for sure!

Awesome job on the emblem

It's the little touched that make a build.

I think it would look better without the bow tie in the middle of the hatch just my opinion tho. It’s starting to look really good can’t wait for the new shoes and lift

Think it would look good with out the door trim

Bro you had us in the cabinet.....🤣🤣

Where did you get your pre cut tint at again can't find the video you talked about it

Looks great! Now just have to remove the dealership front plate thing

What air compressor do you use to spray?

Do u have a video of you doing the new coats on the frame not of the Tahoe just any vehicle

what size tip and air pressure do you use with your spray gun? me and my dad just fixed some rust and blended in the paint to factory but going off what the paint said it sprays like shit at that pressure and size tip

Can't stop watching your videos great work man keep it up

If you’re going to tint it just do 5% film all around over rear privacy glass. And then do the shield in 50 or 70

Use VHT night shades on the lower fogs

NICE TOUCH!

aftermarket offroad front bumper needed wont look right as is with a lift

You have to leave the part in the zep degreaser, it will take all the chrome off

i think darker headlights to match the tail lights would make it 2 times better

Badass Looking family SUV 😮👍🏻💚🤩🥰

Should use automotive grade tape will help alot

Grab some taillight vinyl for the fog lights did it. For my Jeep and honestly the absolute best for the money thing to do for the money (also would be decent channel content)

Ryan I love your channel so much your so inspirational

Can you please make this thing super cool on the inside as well as the outside

Colormatch and retro fit headlights

That bow tie reminds me of the old chevys with the red outline bowtie

Even 2020s on the lot around here are all full of surface rust, gm needs to come up with a better coating 😂

Would you consider start doing tahoe giveaway with merch. Gonna be a sick build🤘

Put tow mirrors on the Tahoe

Put some cab lights on the Tahoe 😁

Not a Chevy guy but sheesh that look amazing

I always get excited when I get the notification of a new video

Do you still have the 03-05 cateye?

hey ryan i live in dayton OHIO

Smoked fogs it’s looking sick

Won’t ‘oven off’ oven cleaner strip that chrome off of the plastic? Try that next time.

Looks good

Check out wil-bond. It’s a great surface prep for paint. I use it all the time

I got an idea just tent the limbs on the running lights to fog lights

What was that music when you were taking the steps off?

I love it good job 👍

you should remove the door molding

My front end looks juicy too 😂

You should wrap the pillars on the doors and rear windows gloss black to match the natural line the windows create, if that’s confusing wrap the pillars gloss black to where it looks like one big window.