BEGINNER Laser Engraving and cutting tutorial with the Sculpfun S9

Рет қаралды 523,129

Күн бұрын

This week I'm diving into the world of Laser Engraving and cutting with the Sculpfun S9. This video is designed to help anyone who is a total beginner or amateur and looking to get into Laser engraving or cutting. The video will walk you through the steps of setting up the Sculpfun S9 and the process to install LIght burn along with test engraves and settings. With this video you should be up and running within the day. Below are helpful tips about framing, starting points and videos I used to get going.
Check out what tools and gear I in the Small Fry Workshop:
Australian: benable.com/Smallfrycreations...
Non Australian: benable.com/Smallfrycreations...
Sculpfun S9 5.5 Watt: shrsl.com/41kuv
Sculpfun S30 Pro Max 20 Watt: shrsl.com/41kuh
Sculpfun Extension Kit: shrsl.com/41kuj
Sculpfun Rotary: shrsl.com/41kul
Sculpfun Air Assist Upgrade: shrsl.com/41kuo
Sculpfun S10: shrsl.com/41kut
Helpful Videos:
Installing Lightburn onto a Mac: • Installing LightBurn o...
Testing print settings: • Lightburn tutorial : G...
DIY Laser Cutting Bed: • Laser cutting bed | Cu...
Starting Position, origins - • Lightburn 101 - Starti... -
Skip Ahead
0:00 - Intro
1:04 - Unboxing and construction
2:22 - Software install
3:53 - Test engrave
7:33 - Logo Engraving
9:05 - Logo Cutting 3mm plywood
12:16 - Logo Cutting 10mm
13:29 - Quick Tip 1
14:01 - Quick Tip 2
15:34 - Quick Tip 3
16:08 -Wrap Up
---------------------------------------------------------
Happy building and if you like to stay up to date with what I'm currently working on be sure to follow me on social.
Facebook: / smallfrycreationsanddiy
Instagram: goo.gl/bWWnQe
Etsy: www.etsy.com/au/shop/SmallFry...
_______________________________________________
Amazon Affiliate Links for Tools and Gear I use
AUSTRALIA:
Tools
- Makita Brushless Drill Driver: amzn.to/3u7x1NJ
- Makita Impact Driver: amzn.to/3nzXTU2
- Bosch Jigsaw: amzn.to/3t4JAI8
- Ryobi Palm Router: amzn.to/3aLHEOz
- Kreg Pocket Hole Jig: amzn.to/3e0Y5si
- Clamps: amzn.to/3vq5VRW
- Triton Router: amzn.to/3gPyoNh
- Glue: amzn.to/3t6iiRy
Camera Gear
- Canon EOS R: amzn.to/3uvfqiV
- Canon 15-35mm Lens: amzn.to/33wHc2p
- Manfrotto Tripod: amzn.to/33ny1l9
- Manfrotto Ball Head: amzn.to/3etRK96
- Manfrotto Movie Head: amzn.to/3o2BaA7
- Rode Lav Mic: amzn.to/2Ryzwu7
- Rode Mic Receivers: amzn.to/3etn9rY
- Voice Over Mic: amzn.to/3nVRIdd
USA
- Makita Miter Saw: amzn.to/3u7L1XB
- Makita Brushless Drill Driver: amzn.to/333eWEG
- Makita Impact Driver: amzn.to/3u7LdGj
- Bosch Jigsaw: amzn.to/3eFvVlP
- Ryobi Palm Router: amzn.to/3e6T0Pj
- Kreg Pocket Hole Jig: amzn.to/3t2Yij2
- Clamps: amzn.to/3gQwlZd
- Glue: amzn.to/3t7zuX3
Camera Gear
- Canon EOS R: amzn.to/3ham36l
- Canon 15mm-35mm Lens: amzn.to/3eVittW
- Manfrotto Tripod: amzn.to/3xVsxMp
- Manfrotto Ball Head: amzn.to/3bbhyot
- Manfrotto Movie Head: amzn.to/3f66Pwq
- Rode Lav Mic: amzn.to/2RxYSZ4
- Rode Mic Receivers: amzn.to/33rFnUK
- Voice Over Mic: amzn.to/2RB5Pbw
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links, meaning I will make commission on sales you make through my link. This is at no extra cost to you to use my links/codes, it's just one more way to support me and my channel! :)
MUSIC:
------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/clear-sky
License code: ONWB97JJ0WICCQ6V
------------------------------

Пікірлер: 698

@danatassler8776 Жыл бұрын

Found this video completely on accident while shopping for a beginner engraving/cutting laser. This is not only the exact sort of product I was after, but your video is great. Simple, informative. Thanks!

@SmallFryCreations Жыл бұрын

Oh thats fantastic. Glad it was helpful. Lasers are lots of fun and super helpful tool. Happy lasering!!

@crazyinpdx70 Жыл бұрын

This was amazingly helpful, thank you.

@SamsungSamsung-xn5fi 9 ай бұрын

@@SmallFryCreations madam i need one machine how can i get i am kuwait

@rieldylanburrows6439 6 ай бұрын

Same I actually bought this product and then realized I hadn't checked the reviews. It had many positives on Amazon and it was on sale. It also has amazing upgrades that were basically plug and play. The rollers for cups etc. Larger print area body. I do 3d printing so looking forward to this and save for a smaller cnc machine in the future.

@rieldylanburrows6439 5 ай бұрын

I actually just ordered the S30 935x905mm upgrade as I am making larger items and would like to cut more parts at once.

@ronnieholloway5057 8 ай бұрын

Just got a nice laser engraver. Been sitting here trying to figure out my next step after unboxing. Your video has been the best guidance I’ve seen so far. Super simple, great delivery, and tips were great. I look forward to what else your channel has to offer. Thank you

@izzypescadero1619 8 ай бұрын

This is the best tutorial, promotion, testimony video ever🎉

@Lollymiss1 Жыл бұрын

I'm getting mine on the 3rd and I'm so excited to try it out! This will make my projects so much easier and faster allowing me to up my side hustle. Thanks for sharing your tutorial and experience with this Lazer printer.

@SmallFryCreations Жыл бұрын

Yahoo!!! That’s awesome!! Such a great and fun side hustle!!

@woodknack1 2 жыл бұрын

This is one of the best beginner videos I have seen for the s9. You hit the very important starter things to know in lightburn. Thank you.

@SmallFryCreations 2 жыл бұрын

Thank you. That is my hope. It was very intimidated so was hoping I could help take that away for people. Such a fun cool tool for the workshop. 😀

@mambaman2007 2 жыл бұрын

I totally agree with you!

@goman7614 Жыл бұрын

I have been thinking about getting a laser engraver for some time now. Your video was exactly what I needed to help answer many of the questions I had about an engraver and how it works. You did an excellent job of explaining the good and bad points about owning a machine like this. Thanks again for putting together this video.

@SmallFryCreations Жыл бұрын

Your welcome. Fantastic to hear I could help. They are lots of fun and open up a world of possibilities

@kennethfiati3188 Жыл бұрын

i really enjoyed watching the workings of the Sculpfun S9 engraver

@SmallFryCreations Жыл бұрын

Thank you. Such a useful tool to have

@jezzab5621 2 жыл бұрын

I am really impressed with your ability to teach.

@SmallFryCreations 2 жыл бұрын

Thank you. Hopefully it’s helpful for those getting started and had no idea like me what they were doing.

@alanmansy9737 2 жыл бұрын

Brilliant video. Just got my S9 and have assembled it, but I found the recommended belt tensioning was way off the mark and the X Beam (laser gantry) kept sticking or catching as it went on its travels, but following your guidance and advice, it now runs like a “well oiled machine” and is as smooth as silk. Yours is certainly the most helpful video on the S9 that I have found. Thanks for posting it.

@andyb7754 Жыл бұрын

Very, very interesting. I really like how you explain and test plus the way you present it is FANTASTIC!!! Thank you.

@SmallFryCreations Жыл бұрын

Thank you very much! Glad you enjoyed the video. Thanks for stopping by

@bradleytuckwell4854 2 жыл бұрын

Thanks for sharing I know nothing about laser engraving or cnc but I so want to go down that path more so on the cnc machine they both make your projects look heaps more professional. So thanks for the encouragement to give it a go.Love your channel and content plus it’s nice to see and hear Aussies on KZfaq

@SmallFryCreations 2 жыл бұрын

Yay that’s awesome! I was nervous about trying it out but am blown away with how good it is and not to hard to pick up and get started 😀 thanks for stopping by and glad to hear your enjoying the content!

@SovietFrontier 3 ай бұрын

What a great video with a rare POV from a newbie doing it live. Great idea. That's how we all are in the beginning.

@SmallFryCreations 3 ай бұрын

Thank you. Wonderful to hear you enjoyed the video

@monkeysausage2404 2 жыл бұрын

So close to pulling the trigger on the S9. Very glad you uploaded this, given me some confidence that ever a chimp like me can get great results. Thank you.

@SmallFryCreations 2 жыл бұрын

😎 awesome. I don’t have anything to compare but I’m impressed. It’s perfect for me and wasn’t to hard to get up and running. Shipping was fast and lots of videos out there on LightBurn if you get stuck 😀

@youroutdoors5453 Жыл бұрын

Great video, I am doing research for a future purchase and your input has been very helpful. I love your excitement and the way you get to the information you are wanting to get out without too much talking about nothing like a lot of youtubers do.

@SmallFryCreations Жыл бұрын

Thank you. That’s awesome to hear and glad I could help

@riaannel3053 2 жыл бұрын

Another tip on the FIRE button: Hold Shift down and press FRAME, and it will enable the laser and trace the outline area of your work (in a square / rectangle) so you can see that your piece is lined up properly. I got my S9 a month ago, and I LOVE it !!

@SmallFryCreations 2 жыл бұрын

Oooo good tip. I will try it out. Thank you. Yes I’m loving it and a little obsessed with it 😂 just can’t believe what it can do and how sharp everything is. Thanks for stopping by 😀

@roberttemple5146 2 жыл бұрын

she has a wonderful way of presenting. She shows (nice and slow) where she is in the software, as an example, so I could catch on. Thank you!

@SmallFryCreations 2 жыл бұрын

Thank you Robert. Glad it was easy to follow along and you enjoyed the video. Thank you for stopping by

@smackchowder 2 жыл бұрын

I have the s9 and love it. Even had a problem with one of the stepper but Sculpfun replaced and customer service was very helpful. I also got the extension which is worth it as it adds quite a bit of size. I would highly recommend it.

@SmallFryCreations 2 жыл бұрын

Oooo this is good to know because the extension arms are one of the reasons I choose it as I thought it would be helpful. Glad to know you would recommend. I’m loving it so far and just amazed at what it can do!

@RaplimNaim Ай бұрын

Just unboxed my S9 and your tutorial made everything so clear! Ready to start laser engraving and cutting like a pro. Thanks! 🔥

@SmallFryCreations Ай бұрын

Yahoo!! A world of fun ahead for you. Happy lasering and thanks for stopping by. Glad I could help

@TooFunnySparky Жыл бұрын

Thank you for the video as I have been wanting to buy a laser for a while now but was hesitant. Your video sold me! Ordered and will be delivered on Tuesday. Again thank you for taking the time to do the video for peeps like me, have a blessed day.

@SmallFryCreations Жыл бұрын

Yay Thats awesome. Its a great machine and I'm so glad I now have one. They can do so much and are lots of fun. Enjoy :)

@craigsunderland3849 2 жыл бұрын

Thank you for sharing this video, never seen your channel before but i'm glad I found it this morning. I recently purchased the Sculpfun S9 and set it up a couple of hours ago. Now i'm going to get into the thick of it :-)

@SmallFryCreations 2 жыл бұрын

Yahoo!! its a great machine. Have been using it for a little bit not and never skipped a beat.

@stevejeffery4951 Жыл бұрын

I’ve just started researching laser engravers and your video is perfect. It has told me what I need to know in basic terms. I don’t need to do anymore research. It was also good to see you getting excited about your first pieces. I’m glad it’s not only me that gets excited by a good result. I also love the slogan about making mistakes, I bare that in mind. Thanks for a great video. Liked and subscribed.

@SmallFryCreations Жыл бұрын

Thats awesome. So glad I could help. No better feeling then something working and looking at it and know you did it! The machines are lots of fun!

@shanciehardy5909 10 ай бұрын

Wow, this helped so much. I just got a laser engraver and had literally no idea where to start. Thank you for covering so many of the basic questions that I had in so much detail. This video definitely earned you a new subscriber!

@SmallFryCreations 9 ай бұрын

Thank you. So glad I could help. Its a great hobby and happy lasering

@thomasshirley7041 3 сағат бұрын

Loved the video. You have a great personality and are enjoyable to listen too. Great help

@ALIENMACHINES 3 ай бұрын

You nailed it, brilliant, so clear and easy to follow. I didn’t know where to start but this video helps so much. Thank You!

@SmallFryCreations 3 ай бұрын

Fantastic. Glad I could help :)

@kevinthegerman1 7 ай бұрын

Excellent video, many thanks. Just assembled my laser machine and sat here scratching my head. You've probably given me all the pointers I need and I'll be having a rummage through your other videos.

@SmallFryCreations 7 ай бұрын

Thats fantastic. Glad I could help

@GenepoolDesign1 2 жыл бұрын

Great video...thank you! I had an Ortur previously, and have been looking at this one on Amazon and thanks to you, I plan on making the purchase now!

@SmallFryCreations 2 жыл бұрын

That’s awesome!!! They are fantastic!!

@ianpilcher666 Жыл бұрын

I have had a lot of interest in one of these machines but never thought that I would be able to operate one. Your video has given me encouragement to carry on and have a go. No doubt I'll be watching your channel, and others, for further encouragement before buying one. Cheers.

@SmallFryCreations Жыл бұрын

Oh thats awesome! They are fantastis and lots of fun!

@wickedcrypto6004 Жыл бұрын

What a fantastic video. I love that you took your time to explain certain things.

@SmallFryCreations Жыл бұрын

Thank you. Glad it was helpful

@wickedcrypto6004 Жыл бұрын

@@SmallFryCreations Also I cant believe how reasonable the price is. Thank you

@Doc.Marten123 Жыл бұрын

Thanks so much, this is a fantastic tutorial. You sold me on the Sculpfun S9! It arrived a couple of days ago so I'll start using it this coming week. Thanks to your straight forward, easy to follow tute I feel confident in setting it up and doing my first project. Looking forward to watching more of your content. Subbed!

@SmallFryCreations Жыл бұрын

That’s awesome!! It’s a top machine with lots of possibilities!

@ddade11 Жыл бұрын

Great video! Thank you for reminding everyone about eye protection. And those tips were amazingly helpful as well.

@SmallFryCreations Жыл бұрын

Thank you. Great the tips were helpful 😀

@jmarshal Жыл бұрын

First time coming across your channel and instant sub! I love your motto about making mistakes. Honestly, that’s what made up my mind to sub. This video was almost exactly what i needed and you’ve given me a jumping off point to more info. Thanks!

@SmallFryCreations Жыл бұрын

Yahoo thats awesome. Thank you for stopping by. I have learn mistakes are just part of the process :)

@user-ux3gf1qx5h 5 ай бұрын

Enjoyed the straightforward style and content: many thanks.

@SmallFryCreations 5 ай бұрын

Thank you. Glad it was helpful

@douglashill6125 5 ай бұрын

Answered many of the questions I had on starting with a laser engraver. Great video and thank you!

@SmallFryCreations 5 ай бұрын

Awesome. Glad I could help

@spyderdon1158 2 жыл бұрын

Great video, set mine up today and time to dive in. Thanks for the great info especially the bit about having the laser at its home position prior to turning it on. Cheers

@SmallFryCreations 2 жыл бұрын

Your welcome. Bugged me for ages!! Yahoo for exciting new toys!! So much fun enjoy

@cjlamber 2 жыл бұрын

Very good and clear presentation. Had no intention of buying a laser but you have shown what can be done with little experience. Not a bad price either.

@SmallFryCreations 2 жыл бұрын

Thank you. Its such a cool laser and opens up so many opportunities. Very easy to learn :)

@Diffy87 Жыл бұрын

Video was suggested from another video and did not disappoint and great to see an Aussie, now I want one of these lasers

@SmallFryCreations Жыл бұрын

Yahoo. That’s awesome. They are so much fun 😀

@fr0stw0lf97 Жыл бұрын

Loved the whole video. Especially the 3 tips at the end. Been asking myself how will i know if the laser will cut on the right area. Can't wait to get my hands on this beauty. Thank you!

@SmallFryCreations Жыл бұрын

Thank you . Glad it was helpful! They are great machines and lots of fun

@garylee4214 Жыл бұрын

Extremely well done! I am new to this with the adomstack A5 which seems nearly identical. Took a lot of the mystery away. Thank you. Subscribed.

@SmallFryCreations Жыл бұрын

Glad it helped!

@sigh_of_the_times 10 ай бұрын

Very good my lady. I'm going to watch it a couple times. Thank you 👍

@SmallFryCreations 10 ай бұрын

Thank you. Glad I could help :)

@foxyloxy57 2 жыл бұрын

Thank you , I have the same laser so it was really helpfull especially the start position . Rich has some nice settings on his forum too

@SmallFryCreations 2 жыл бұрын

Fantastic. Glad I could help 😀 such a fun tool to learn and use 😎

@johnnysideasofthings3809 Жыл бұрын

Love your way of explaining . I learn a lot thanks. You have another fan.

@SmallFryCreations Жыл бұрын

Thank you. Glad it was helpful and your enjoying the content

@abdoooly 7 ай бұрын

Your studio is stunning!

@SmallFryCreations 7 ай бұрын

Thank you :) Its a great space to be in for sure

@SalaziNazz Ай бұрын

Just watched your tutorial and it was super helpful! Getting my hands on the S9 soon, can't wait to start engraving and cutting. Thanks! 🔥

@SmallFryCreations Ай бұрын

Fantastic. Great machine and happy lasering. Glad i could help

@malcolmnorman5237 2 жыл бұрын

Superb introduction to laser printing, liked, subscribed and saved to my projects folder.

@SmallFryCreations 2 жыл бұрын

Aweesome. So good to hear. Thanks for stopping by :)

@ianharvey4356 2 жыл бұрын

Well done very helpful. Also it is great to watch a Aussie video.

@SmallFryCreations 2 жыл бұрын

Glad you enjoyed it! Thanks for stopping by

@coda514 Жыл бұрын

Very informative, just what I was looking for. Thank you.

@SmallFryCreations Жыл бұрын

Glad it was helpful!

@Lottekoen 27 күн бұрын

Great video. Lot's of information and tips. Thank you.

@SmallFryCreations 22 күн бұрын

Glad it was helpful! Thank you

@OzarkArtsandCrafts Жыл бұрын

Very good review. Am now considering this model for my shop. Thanks.

@SmallFryCreations Жыл бұрын

That’s awesome. So much fun and lots of possibilities!!

@laragoldman5620 Жыл бұрын

This is exactly what I was looking for. I'm not using that brand, but I needed to know about going from zero. I'm in Belize, there's no way I'm going to find the base thingy either, so super appreciative of the tips and hacks!!

@SmallFryCreations Жыл бұрын

Hey Thank you. Thats awesome. Most of the lasers work the same so all the tips will work. After this video I have found out the Galvanised mesh is not the best to use as Galvanised metal shouldn't be heated so might be bes to get another type of mesh. Happy lasering :)

@sajit1290 2 жыл бұрын

Best in-depth video

@SmallFryCreations 2 жыл бұрын

Thank you. Glad it was helpful 😀

@silviaborgers4105 6 ай бұрын

thans a lot your tips are very informative!!! just bought the laser before.

@SmallFryCreations 6 ай бұрын

Your welcome. Glad I could help.

@stevelong3249 9 ай бұрын

OK, Small Fry. You were such a joy to watch. I actually turned on notifications just to see what you're up to next. I absolutely loved this video. At 62, I just purchased a stupidly large laser engraver. It's 150 watt 6 1/2 feet wide by 5 1/2 feet deep. I made my own cnc machine. You were the first video I clicked on. I do have a little background in IT. 2 degrees and a handful of certifications. You are a breath of fresh air. Love how you mention your mistakes and what you did to correct them. Perfect. I look forward to your future clips. I'll be doing a marathon on previous videos of yours. Keep going, kid. Your amazing

@SmallFryCreations 9 ай бұрын

Oh thanks for the kind words. Glad your enjoying it. The laser is so much fun with so many possibilities. Great hear your enjoying the content 😀

@engineer3112 9 ай бұрын

I'm used to larger, corded routers kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

@boomullarky 2 жыл бұрын

Thank you so much for this video. I’ve been bouncing back and forth about which diode laser setup to go with - Atomstack, Otur, Fox Alien, Two Trees, Sculpfun…. This nuts and bolts look into how to get it operational has me leaning back towards the Sculpfun unit.

@SmallFryCreations 2 жыл бұрын

Fantastic. Its so har dto choose. I understand. I will also have a video coming out in 2 weeks time looking at the Ortur and the rotary attachments you can get for it. The sculpfan is a great unit and I have been using is non stop since set up and it has not skipped a beat.

@boomullarky 2 жыл бұрын

@@SmallFryCreations I actually purchased the Sculpfun S9 just after commenting on your video. When I clicked the link in the description, I saw that Banggood had a nice reduction on the price that was valid for 4 hours at the time I saw it. So I jumped on it. Every brand seems to have a great feature or two that the others don’t and then a drawback as well - eg. Atomstack has a powerful laser and offline control but it’s hard to to get any kind of air assist going on the unit due to the laser housing’s design. Finally just had to whittle down to what was most important for my usage; well built with a powerful laser that’s affordable in my budget. The S9 checks those boxes. Looking mainly to make router templates with it. I’d just not ever seen a video of someone going through using it in such detail. Thanks so much!!!

@SmallFryCreations 2 жыл бұрын

Fantastic!! It’s a great unit! Like you say every unit has its advantages!! The Sculpfun is fantastic and I think best for the price point. Happy lasering 😎

@L3X369 2 жыл бұрын

Great video and on point tips!

@SmallFryCreations 2 жыл бұрын

Thank you

@jennybarnes4806 2 жыл бұрын

Really good review. Have thought about getting a laser cutter so your video was very timely. Cheers

@SmallFryCreations 2 жыл бұрын

Thank you! A great tool to add to the workshop. It has unlocked so many ideas for me!!

@Corona8586 Ай бұрын

Thank you for the video I really like everything you said and thank you for taking the time to do this for us.

@SmallFryCreations Ай бұрын

Thank you for stopping by. Glad I could help

@SerenaSkyy 18 күн бұрын

Thank you! I'm completely new to this, and my laser engraver kept moving back to an axis point and kept trying to go back further with no space, so it was just constantly bumping at the edge. This video helped me and to find a home origin to start because like you, my laser was randomly placed in the middle of the grid and not in the corner. 😅

@SmallFryCreations 16 күн бұрын

I feel the pain. Glad I was able to help :)

@dahlbergt Жыл бұрын

Thank you for sharing!

@MaryellenSmolka-ry5on 9 ай бұрын

Wow, thank you. This was great!

@princej9883 2 жыл бұрын

I like your energy and I am planning to learn laser engraving and use it on my products thanks

@SmallFryCreations 2 жыл бұрын

It will work if there is a coating on top of the stainless steel. The laser with then remove the coating revealing the stainless steal below. Hope this helps

@davekolp4552 10 ай бұрын

Awesome job. Very happy with your video. I love your excitement. I have a onefinity router cnc already. I am going to ad a laser now.

@SmallFryCreations 9 ай бұрын

Thank you. OOO A CNC is on the wish list for me. Thats awesome. Great combo

@klistada1 2 жыл бұрын

Good video. I've had the S9 for a couple of months now and I love it. It just seems the best bang for buck, a great combination of size, power and quality. I have added a 3d printed air assist which makes cutting much faster, reduces smoke staining and theoretically keeps the lens cleaner. Also added limit switches which, along with absolute coordinates, makes repeatability for production work much better.

@SmallFryCreations 2 жыл бұрын

Thank you. Oooo these sound like great additions. I will be looking to some of these for sure. Thanks for the tips and info

@klistada1 2 жыл бұрын

@@SmallFryCreations Actually the addition of limit switches might make an ok video as I don't think anyone has actually done an all in one video yet.

@TooFunnySparky Жыл бұрын

Hi Klistada, I just ordered the S9 and was wondering if you could advise on which air assist you purchased. Not having it in hand yet I wasn't sure which would fit appropriately. Thanks in advance for your help.

@JoesWorkbench 2 жыл бұрын

Great video demo and laser, seems like a great little machine. Definitely on my wish list 😍

@SmallFryCreations 2 жыл бұрын

Thanks joe. I am very impressed with it 😀

@princej9883 2 жыл бұрын

Can i use this laser on thin stainless steel material as well to engrave? PLease reply

@RickshawMunky 9 ай бұрын

Great video 👍 I use a cooling rack for baking as a bed works wonders 😊

@SmallFryCreations 9 ай бұрын

Thank you. That is a great option. Great idea.

@jordanfresquez3848 Жыл бұрын

Thank you so much you gave it like how to use a laser engraver for dummies basics of basics how to and that’s what i have been looking for , I’m actually starting a business on just engraving so I’m excited

@SmallFryCreations Жыл бұрын

That’s awesome!!! Glad I could help!!

@jordanfresquez3848 Жыл бұрын

@@SmallFryCreations it really is hopefully I’ll be getting the xtool d1 pro 10w with the tumbler and I do custom wood work as well so that is going to be pretty awesome to use for it also

@shanegoodwin2912 2 жыл бұрын

Great video mate! Thank you for your work. 😊👍

@SmallFryCreations 2 жыл бұрын

Thank you. Glad you enjoyed it and hope it was helpful

@aileenharvey1438 5 ай бұрын

Can't wait to get my laser and have a go. Thanks for a great video

@SmallFryCreations 5 ай бұрын

Yahoo!! Happy lasering

@yuybeta 5 ай бұрын

i just got my brothers Sculpfun that has been sitting in his garage for over 2 years. Wish me luck on how to set this up and make something!

@SmallFryCreations 5 ай бұрын

You have got this. Happy lasering :)

@bethy7676 2 жыл бұрын

I just bought mine. Cant wait for the delivery

@SmallFryCreations 2 жыл бұрын

Yay!!! How exciting. Such a great purchase!!! So much fun

@foxa777 2 жыл бұрын

Many thanks for the excellent tutorial, loved it!

@SmallFryCreations 2 жыл бұрын

Yahoo. Glad you enjoyed it

@princej9883 2 жыл бұрын

Can i use this laser on thin stainless steel material as well to engrave? PLease reply

@bryanproskiw5554 Жыл бұрын

Just watched your excellent video! Love the postings on the wall and your energetic presentation.

@SmallFryCreations Жыл бұрын

Thank you. Glad you enjoyed the content. Oh yes I do love the poster. I refer to it all the time! :)

@wesleyferrari8116 Жыл бұрын

Thanks for the tips

@SmallFryCreations Жыл бұрын

You're welcome. Glad you enjoyed the content

@HeathInHeath 6 ай бұрын

Great video. Thanks for the tips at the end.

@SmallFryCreations 6 ай бұрын

Thank you. Glad I could help. I just realised a video with more lightburn tips and design run thoughts that might be helpful if your starting out 😀

@robertthibodeau1575 11 ай бұрын

Thank you very much for doing this video. You answered 3 main questions i have been befuddled by. i liked and subscribed

@SmallFryCreations 11 ай бұрын

Thats awesome and glad I could help

@abdullahbillali3604 Жыл бұрын

Huge thank you for the video, lots of great tips

@SmallFryCreations Жыл бұрын

Glad it was helpful :)

@petec6690 3 ай бұрын

Beginner myself. Great video. Shows what I needed to know. Also the tips are excellent. Was hoping to find someone who would explain things in plain language and SHOW how it was done. You have a new fan.

@SmallFryCreations 3 ай бұрын

Thank you. Glad I could help. They are lots of fun and opening up so many opportunities :)

@bj7575 5 ай бұрын

Thanks for your review. Can you please try and show us how it goes engraving glass. I know you don't have the rotary tool but very interested in seeing how it does glass. Your the only person I've seen in Australia with this machine.

@eevagirl Жыл бұрын

Great tutorial from a fantastic tutor. Thanks heaps! (:

@SmallFryCreations Жыл бұрын

You're very welcome! Glad I could help

@schinbeindrumco 2 жыл бұрын

Yeah! Welcome back! I’ve been shopping about for a small laser actually…

@SmallFryCreations 2 жыл бұрын

Hey thank you. I’m super impressed with it. Done a few things with it since filming the video and it’s been awesome. I don’t have anything to compare it to but shipping was quick and machine is great 😀

@CaptainEllisK 2 жыл бұрын

Great video. Waiting for mine to come in the mail. I ordered mine with the expansion base

@SmallFryCreations 2 жыл бұрын

OOO exciting! Thats awesome. I think the expansion is a great upgrade. Going to look into myself

@ItstheDaveShow1 6 ай бұрын

I just got a very similar laser to do a video review on, super newb here, def a learning curve for the settings, I will check out the links you recommended to learn this stuff too. thanks!

@SmallFryCreations 6 ай бұрын

Yahoo! They are lots of fun and once you get stuck in it won't take long to get a handle on

@tonyromano6220 Жыл бұрын

Outstanding video.

@SmallFryCreations Жыл бұрын

Thank you 😀

@vanessebaumann3625 Жыл бұрын

Thank you, very nice clear to the point tutorial! Please share cut settings you used for the 3mm

@SmallFryCreations Жыл бұрын

Thank you. I'tm now using an Sculpfun S10 and on that laser I use Speed: 300mm Power: 75% and 3 passes. With the S9 you would have to slow the speed down and maybe up the passes. Would just need to trial and error as all materials are different

@terryraines9952 12 күн бұрын

thank you for doing the video and looking at buying that one, but how did you get your logo the software to engrave it

@carstenschmucker9140 Жыл бұрын

Wow, I also stumbled across the video and find it very helpful if not the best I have seen so far about the topic! Thank you! I could think about million things to create with that and also in combination with a 3d printer. I have seen an instrument build with it (Hurd Gurdy) and got my attention. Very cool! Thank you!

@SmallFryCreations Жыл бұрын

Thats awesome. Glad it was helpful and you enjoyed the video. The laser is so much fun :)

@cyntrez1 Жыл бұрын

Great video! Thks

@garethuden497 Жыл бұрын

This was really helpful thank you.

@SmallFryCreations Жыл бұрын

Awesome. Glad it helped

@drewesalan7152 Жыл бұрын

Great introduction... thank you.

@SmallFryCreations Жыл бұрын

Thank you

@deliawood1 Жыл бұрын

Great video as usual.

@SmallFryCreations Жыл бұрын

Thank you :)

@GhengisDhad Жыл бұрын

great review!

@SmallFryCreations Жыл бұрын

Thanks!

@NelHas2Now Жыл бұрын

Thank you soo much for posting! ❤😊

@SmallFryCreations Жыл бұрын

No problem 😊 Glad you liked it

@norliabintiduramin5732 Жыл бұрын

tq so much to u... absolutely i can engrave and cut just in one day with this guide u provide us

@SmallFryCreations Жыл бұрын

Thank you. Glad it was helpful.

@priscillagileswesley Жыл бұрын

thank you so much you really helped me out

@SmallFryCreations Жыл бұрын

Glad I could help!

@FixitFingers 2 жыл бұрын

Bangood should be ecstatic with that demo Ains, awesome video and nice bit of kit.

@SmallFryCreations 2 жыл бұрын

Thank you. I’m current a little obsessed with the laser and just so many ideas I wanna try. A ton of fun learning 😀

@darkmonk99 2 жыл бұрын

Buddy you are a machine. I live in Sydney your information and presentation video was awesome. Was just about to buy one now I will so much great advice thanks a lot- go crank some money with your work and designs. I am now a old man but seeing someone with so much passion about life at your age is cool.

@SmallFryCreations 2 жыл бұрын

Hey glad I could help. They are so much fun and just hope it can help people get started 😀