SMART CAR SAM UNIT REPAIR - Liquid damage and more, let's fix it.
Рет қаралды 7,790
9 ай бұрынFlexitronics - Mail in from a viewer, this control unit has been water damaged and is causing intermittent problems with the car. Let's take a look at this unusual board and see what is going on!
Book a Repair here: www.rocket-repairs.co.uk/yout...
Facebook - / rocket.repairs.southam...
Instagram - / rocket_repairs_southam...
#Microsoldering #soldering #repair #smartcar #smartcarrepair
@rocketrepairs 9 ай бұрын
FYI the customer hasn't actually picked up the device yet! As soon as they do I'll update the top comment :)
@i.c.andrews9122 5 күн бұрын
Wonderful job. I’m in the process of getting my unit done for my 08 here in Canada. I had the original cloned before the soldering. It’s a lengthy process to get all this done. But, I know it will be worth it.
@ronny332 9 ай бұрын
Well, that's like repairing old CRT TVs :-). I like it. Fixing traces and soldering a lot.
@perish1n 9 ай бұрын
what a thorough job nice 👍
@RetroElectronicRepair 9 ай бұрын
Great to see you fix something different Joey. That exact same thing (cracked solder joints) happens on the clocks of ford cmax cars and can stop the car from starting. I wish i had filmed fixing my clocks when i had trouble with my car.
@TheSkaldenmettrunk 9 ай бұрын
A Nice clean and nice reflows is so sometimes all it needs.. hopefully...
@VampyRagDoll 9 ай бұрын
In before the pinned comment from joey 🤣
@dodgydruid 9 ай бұрын
What you need m8, is what us watchmakers use to clean rust and corrosion off metal and painted surfaces... something called pegwood, it is very cheap and you sharpen it like a pencil and its more robust than a q tip but less damaging to delicate surfaces, trust me you won't look back with some pegwood in your arsenal of tools.
@rocketrepairs 9 ай бұрын
hit us up with a link!!
@MarcNaeyaert 2 ай бұрын
❤en Heb een module die niet meer werkt wat kost het voor reparatie
@adotintheshark4848 7 ай бұрын
Nice video, but what soldering tool are you using?
@ronlevin2339 9 ай бұрын
how much do u charge for it ? One more thing, I found that the pest way to clean water damage is actually with DDW (double distilled water) and then with 100% alcohol
@robertsauber8910 9 ай бұрын
you're a dentist for electronics
@malinhead8468 9 ай бұрын
A person that nobody wants to see??😂
@djm9937 9 ай бұрын
tough when you can't test it !
@colinboneham7387 9 ай бұрын
Would it be easier to use a very fine paint brush for the solder mask instead of tweezer edge?.
@dimanpro7007 9 ай бұрын
No, because you want to waste as less material as possible
Rocket Repairs
Рет қаралды 7 М.
Car Wizard
Рет қаралды 563 М.
Rocket Repairs
Рет қаралды 3,1 М.
Creative Hacker
Рет қаралды 205 М.
Typecase
Рет қаралды 1,8 МЛН
Bekmobil shorts
Рет қаралды 2,7 МЛН
Alex Boyko
Рет қаралды 320 М.