Welcome back to my channel! In this video, we're starting an exciting new project where we'll control home accessories using an ESP32 via Bluetooth. This is the first part of a two-part series. Today, we'll focus on the ESP32 setup and coding. In the next part, we'll build an Android app to control the ESP32. Let's get started!
Required Components:
ESP32 board
Green LED (GPIO pin 12)
Red LED (GPIO pin 13)
220Ω resistors
Jumper wires
USB cable
Software:
PlatformIO with Visual Studio Code
ArduinoJson libraries
Hardware Setup:
Connect the Green LED to GPIO pin 12 on the ESP32 through a 220Ω resistor.
Connect the Red LED to GPIO pin 13 on the ESP32 through a 220Ω resistor.
Use a relay board for connecting home accessories to an AC power source.
Source Code:
The complete source code and APK file for the Android app for this project is available on my GitHub repository.
ESP32: github.com/Mag...
Magic-BT Android App : github.com/Mag...
Next Part:
In the next part of this series, we'll build an Android app to control the ESP32. Stay tuned!
Don't Forget to:
Like the video if you found it helpful
Subscribe to the channel for more exciting projects
Leave a comment if you have any questions or suggestions