SmartShow USB to DMX from Ebay, setup and simple testing
Рет қаралды 24,787
Күн бұрын
@armgod1 3 жыл бұрын
Thanks for the demo. I will give that driver and entecc interface a go with my JMS USB2DMX opto dongle. I think it can give me the dmx charts of my china lights
@MikesLEDShed 2 жыл бұрын
Thanks :-)
@richardmiller1375 3 жыл бұрын
Thanks very much for this video. I'm looking into buying a DMX controller. Being a retired computer programmer for 35+ years, I'm going to give writing a PC controller a try. Gotta keep busy, right?
@MikesLEDShed 3 жыл бұрын
Hi - glad you liked the video, ive written several programs in both VB6 and VB.net to control lights via DMX and the driver for this and the controller make it easy to code. I created a program for a local rock band to use while they where playing around the pubs and clubs.
@deepakyatoskar7795 3 жыл бұрын
yes it good demo, Hi Richard engineer and technology never retires
@timboatfield Жыл бұрын
Hi Richard How did you get on with writing a controller?
@Tito_1968 3 жыл бұрын
Thank you 4 the video, but Is that thing can work with Apple computers as well ? My regards
@chraven69 Жыл бұрын
thanks for the information, but the cdm v2.12.364 did not have a install file
@rappsongs 3 жыл бұрын
The DMX / mic XLR pin protocol is irrelevant considering the wire gauge is the same lol
@94XJ 2 жыл бұрын
XLR *should* have shielding which isn't necessary with the digital DMX signal which should make DMX specific cables cheaper. You can use a mic cable for DMX but shouldn't use a DMX cable for mics.
Joel Engelhardt
Рет қаралды 133 М.
Mikes_LED_Shed
Рет қаралды 432
Julian Gray Media
Рет қаралды 186 М.
Tony Tascioglu
Рет қаралды 82 М.
Benz Outdoors
Рет қаралды 9 МЛН
Malik Ali
Рет қаралды 101 МЛН