How To Choose The Right Method For Making a Rubber Mold

Рет қаралды 38,845

Күн бұрын

This video explores three different mold-making techniques using the same model. Discover the advantages and considerations behind block molds, brush-on molds, and cavity pour molds.
00:00 Introduction
00:21 Block Mold
01:41 Block Mold Advantages
02:37 Brush-On Mold
04:02 Brush-On Process
04:48 Brush-On Mold Advantages
06:18 Cavity Pour Mold
07:29 Support Shell
09:08 Cavity Pour Mold Advantages
11:04 Conclusion
Explore the pros and cons of each method, learn about material costs and working times, and find out which technique suits your specific project needs. Whether you're a beginner or an experienced mold maker, this tutorial will help you make informed decisions in your mold-making journey.
#MoldMaking #BlockMold #BrushOnMold #CavityPourMold #Tutorial #DIY
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
www.smooth-on.com
/ smoothon
/ smoothon
/ smoothon

Пікірлер: 75

@smoothon 5 ай бұрын

Milo walks you through the steps in choosing the types of mold you can make for your project!

@roydodd4694 Ай бұрын

❤❤it😊😊

@TheStockwell 5 ай бұрын

This is a clear and to-the-point tutorial. I'm really tired of goofy tutorials which think viewers need hipster music, Kubrick-style editing tricks, and lots of annoying jokes. Just show how it's done, Chester! 😸 Best wishes from Vermont 🍁 and have a terrific 2024!

@smoothon 5 ай бұрын

Thanks for watching! Don't forget to subscribe and have a great 2024!

@TheStockwell 5 ай бұрын

@@smoothon I'm a proud subscriber - and I've been using your products for years. I'm moving up from small items to larger works. When I'm finished restoring an 18-inch statue of Napoleon, you'll be hearing from me! 😸👍

@smoothon 5 ай бұрын

Awesome!!

@isaackershnerART 4 ай бұрын

something about cavity pour molds are just soooo satisfying!

@smoothon 4 ай бұрын

It is one of Milo's favorite types to make.

@encapsulated_nomad1359 3 ай бұрын

idk how many more videos I'll be watching aside from this one but regardless I am subscribing to the channel simply for the great display and demonstrations to the different approaches to making molds PLUS the reasons to make such molds. I feel so well informed and it really helped me decide on what method to use. Thanks again.

@smoothon 2 ай бұрын

Thank you so much for your kind words and for subscribing! We appreciate your support.

@Esteban-lj8sn 4 ай бұрын

Maybe the best overview on silicone rubber mold making I watched so far, spoken so clearly,. That's highly appreciated for non-native english speakers as me. Outstanding work ! I've got some Smooth-On products and they are great, the only downside is the cost and availability in my country. Cheers from Argentina. PS: Suscribed!

@smoothon 4 ай бұрын

Thank you for watching and the kind words!

@christianjensen5523 4 ай бұрын

Outstanding video - unlike many videos out there, this simple and clearly presented overview was truly educational and extremely helpful.

@smoothon 4 ай бұрын

Thank you for watching! Don't forget to subscribe!

@agusromero9148 5 ай бұрын

Gran tutorial para seguir aprendiendo gracias más videos de este tipo 😁👏👏🙏

@smoothon 5 ай бұрын

Thank you for watching! Don't forget to subscribe!

@erik_riv 5 ай бұрын

Excellent summary! 💯 I have learned a lot thanks to your tutorials. Smooth-On products are a guarantee of quality ⭐⭐⭐⭐⭐ The block molds that have embedded block molds were not mentioned. Thank you very much to the Smooth-On team and happy new year everyone! 😃 🙏 🎉

@smoothon 5 ай бұрын

Thank you for watching! Have a great New Year!

@kuikai100 3 ай бұрын

thanks

@smoothon 3 ай бұрын

Thanks for watching, and don't forget to subscribe!

@amelytekim 4 ай бұрын

Thank you for making such an informational video! You have saved a lot of people's research time🫶💕💕💕

@smoothon 4 ай бұрын

Thank you for watching! Don't forget to subscribe!

@wdsgothictrader7413 Ай бұрын

So perfectly work. Thanks for your support and explication.

@smoothon Ай бұрын

Thank you! Cheers!

@aliahmad-uq7cx 4 ай бұрын

very nice🙂👏

@smoothon 4 ай бұрын

Thank you for watching! Don't forget to subscribe!

@Migssgarcia 5 ай бұрын

Very helpful! Thank you so much for this video.

@smoothon 5 ай бұрын

Thank you for watching! Don't forget to subscribe! 😀

@deanwerth7241 Ай бұрын

Thanks for great video. I would like to know which mould has the longer life span. The block mould I would say.

@smoothon Ай бұрын

The best answer is that it will depend. There are a number of different factors that can cause the mold to last a long time. The benefit of the cavity pour though is that you can easily make new molds if you need too.

@roydodd4694 2 ай бұрын

❤❤it 😊😊

@smoothon 2 ай бұрын

Thank you. We hope it helped you!

@akeem2752 2 ай бұрын

If i have old molds I don't use, could I chop them up and use it as a filler in a block mold or would that decrease the integrity of the mold?

@Febiza919 12 күн бұрын

That sounds like a genius idea actually 🤔Lots of people just add more cast items to their molds to maximize the use of space, so I don’t see why that would work, especially since you don’t have to remove it after.

@np4136 5 ай бұрын

I have used plastic wrap between the clay and Free Form Air to minimize clean up. It works very well, although it may leave wrinkles inside the cured shell depending on how smooth you can lay it down. Is there any reason why you wouldn't recommend doing this?

@smoothon 5 ай бұрын

If that technique works for you, that's awesome! We see no reason this technique couldn't be used.

@levanitadiauri7956 3 ай бұрын

Do you have a video where u make a mold for legged animal ? Or even complex for legged animal (horse, donkey etc.) whith rider on it? Thanks

@smoothon 3 ай бұрын

Hey there, We have a video of Milo molding some animal sculptures. kzfaq.info/get/bejne/h690nLefxLWbgZ8.html If you have further questions please dont hesitate to send us a tech ticket and we can help out with any specific questions you might have. www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!

@brockbeckstedt6483 5 ай бұрын

Does Smoothon have hands on classes at factory, if so where can I get more information on my question?

@smoothon 5 ай бұрын

You can get technical support for our products here www.smooth-on.com/support/ and we offer 2 day how to Seminars as well. www.smooth-on.com/content/seminars/

@user-to9uz6ck3e 3 ай бұрын

Hi, what type of method would you recommend to make a silicone mould for simple plant pots. Thank you

@smoothon 3 ай бұрын

Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!

@meedegoo6778 4 ай бұрын

Hello! i have a question - what material for molding form should i use if i want to make an iron/metal mold sculpture? i dont think that silicone nor rubber will be useful in this case? thank you for the video!

@smoothon 4 ай бұрын

Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/

@miloradmedunic6202 3 ай бұрын

You have to use investment casting material (ceramic shell, sand...foundry supply)for anything that is hotter than 560F. (aluminum, bronze, iron....)

@grahams6690 3 ай бұрын

was it a usa gallon on the mold star 30. and the mold size. please.

@smoothon 3 ай бұрын

It was about a gallon of material.

@gladiatormechs5574 4 ай бұрын

can i pour SMOOTH ON 66D resin in outside when in cold weather conditions... will it cure ?

@smoothon 4 ай бұрын

Most likely not. You should use 66D at 73F/23C

@nick_coles_art 17 күн бұрын

This has helped me so much. Im just starting out with moulding. One thing i dont get is how to get a model out of the mould if there are large gaps for instance a figure with the hand on hip. How do you release the figure if the solicone is trapping it?

@akselyilmaz4537 12 күн бұрын

For something like this I think a multiple part mold is necessary

@akselyilmaz4537 12 күн бұрын

Or you can break the model into several parts and do block molds of the parts if they are not too complex after separation

@nick_coles_art 11 күн бұрын

@akselyilmaz4537 ah ok awsome, thankyou.

@smoothon 10 күн бұрын

Absolutely. A multipart mold is your best friend in that circumstance.

@nick_coles_art 10 күн бұрын

@smoothon awsome thankyou. Do you have videos on multipart moulds?

@Arhmt9Playlist Ай бұрын

Did you use hot glue to stick the plexi glass together?

@smoothon Ай бұрын

Hello, Yes he did use hot melt glue to adhere them together temporarily.

@06673806 Ай бұрын

may i use epoxy resin on mold star 15, mold?, and will it reduce the life of that mold? , thanks for answer

@smoothon Ай бұрын

Hello, Yes you can however it will reduce the life of the mold. If you have specific questions I suggest reaching out to our technical support team. They can answer your questions further indepth. www.smooth-on.com/support/ticket/add/agree/

@JorgeLopez.888. 3 ай бұрын

Great video!!!!!! I have a question. It is possible to make a figurine that is 2.5 inches tall, maybe with a soft wire inside to make it bendable?.

@smoothon 3 ай бұрын

Hi there! That is absolutely possible. This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!

@JorgeLopez.888. 3 ай бұрын

@@smoothon Hi, thanks for your answer, I dont know what you mean for a ticket, I did click on the link but still not very clear to me. I will love to see a video about a silicone figurine with bendable wire inside. Thanks again!!

@JorgeLopez.888. 3 ай бұрын

@@smoothon Oh I just figure it out. Thank you

@smoothon 4 сағат бұрын

Thanks for the suggestion. I will add that to our list of projects!

@robertshimaingo7838 Ай бұрын

Can these molds be used for plastic injection molding?

@smoothon Ай бұрын

Hi there! This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!