Snapmaker 2.0 - Printing TPU Tips and Tricks
Рет қаралды 53,568
This is my tips and tricks about how to achieve nice results when printing TPU filament on Snapmaker 2.0
Cura Profile - mega.nz/file/hUlHmCSB#FlmrVILO4YTbrdCdjFBOyaPc1FAepSo_cBIsDDFDWWU
OTHER VIDEOS YOU MIGHT LIKE:
3D Printed Wheel - kzfaq.info/get/bejne/bM9_mJlmzdLVnYU.html
3D Printed Mini Vacuum Cleaner - kzfaq.info/get/bejne/hax9drmmqNC1iaM.html
3D Printed Functional Water Pump - kzfaq.info/get/bejne/m7t2bJWY3purooE.html
3D Printed Turbocharger - kzfaq.info/get/bejne/fLR5h92o39O2ZYU.html
Working 3D Printed V8 Engine - kzfaq.info/get/bejne/iJOSmbd8npqtmo0.html
3D Printed Rocket + Visual Effects (rocket launch) - kzfaq.info/get/bejne/jtqopqSj153PXZc.html
3D Printed towers + CGI shots - kzfaq.info/get/bejne/obpgdq6LyK6YgX0.html
How to Make a 3D Printer Enclosure - kzfaq.info/get/bejne/fJmTmJiK3szImKs.html
Printer - snapmaker.sjv.io/5bP1X3
Filament - amzn.to/39sBrWK
Filament Dryer - amzn.to/3gtEJfd
Camera - amzn.to/3xj6aiZ
Lens - amzn.to/35bay7n
Lens 2 - amzn.to/2Vg93TZ
Studio Light - amzn.to/3jYgI3a
Facebook: Mrgoodcatt
Instagram: mr.goodcat1
TikTok: www.tiktok.com/@mr.goodcat01
Music:
Track: Will You Be Mine (feat. Karemann) - Broke in Summer [Audio Library Release]
Music provided by Audio Library Plus
Watch: kzfaq.info/get/bejne/l8uVksKXvJidn40.html
Free Download / Stream: alplus.io/wil-you-be-mine
#3DPrinted #Wheel #MrGoodcat
@sidgrover9428 2 жыл бұрын
life saver!!! i had the exact same problems but i dont think i would have worked out it was the spring causing the problem. you have saved me a lot of hassle. thank you very much
@MrGoodcat1 2 жыл бұрын
Glad it helped!👌
@apulsoft 4 ай бұрын
Amazing! Thank you very much for this. Using a very soft spring works extremely well for me. The hard part is removing the original spring without making it fly away ;)
@Critter0817 Жыл бұрын
Love your solution. Don't introduce any math. Everyone who's got a 3d printer will have a pen. Good work!
@Nentiker Жыл бұрын
Thank you, the spring tip saved my life.
@brianflynn5699 2 жыл бұрын
Worked perfectly. This saved me a lot of time, thanks!
@mcalin1859 2 жыл бұрын
Awesome tutorial. Thanks!
@robbrodar173 2 жыл бұрын
great job, very insightful/useful
@myxrprecious8807 6 ай бұрын
Wow, what a crazy solution. thank you. Let me find out where my TPU is.
@user-wc9nf4xg3z 3 ай бұрын
your are an angel!!! I solve my problems with your video
@MrGoodcat1 3 ай бұрын
Nice to hear that
@tannerwierschem2956 2 жыл бұрын
Its funny how something that simple can change so much. Tossed that spring in my print head and it runs TPU great. Nice work, man! Love your videos. Great editing and tunes! Snapmaker comments "Cool" More like "Busted. We arent going to make some extra change off these people."
@MrGoodcat1 2 жыл бұрын
Thank you Tanner for your support🙏
@orichienal Жыл бұрын
BÄM, finally a solution for the filament loop, it prints more than wonderful, thanks for that
@brighamcook3853 Жыл бұрын
Wow! Just changed the spring and it seems to be working! Don't wanna jinx it I just started the print but I'll be back to give an update. *Update: The print executed very well. This is a good fix. Still some stringing issues but at least I get a consistent extrusion. Thanks for the help.
@dingbatt 2 жыл бұрын
Just started using TPU in my Snapmaker. Hadn’t thought about the extruder spring but I’ll keep it in reserve. So far printing at slow speed (20mm/s) and temperature towards the top of the filament manufacturer’s recommended temperature range (220) has produced acceptable results but lots of stringing. I have however been really pedantic about keeping the filament dry. I must try a tire like the one in this video. But it will take a looooong time.
@KarlToona 2 жыл бұрын
Dry it out in the oven around 60c for 1hr. Or print directly from a dry box
@rexxxx1984 2 жыл бұрын
Hi, thank you for that grate tip. Worked also perfectly for me. Normal PLA Profile with little higher temperatures. (220°C Extruder, 80°C Bed).
@MrGoodcat1 2 жыл бұрын
Nice to hear that.
@andrewbarber9405 Жыл бұрын
Thank you for this! Tried the adapter and it didn't help. This is a good fix for extremely squishy filament. I believe the issue is the guide roller compresses the filament until it touches the gear, then the filament gets rolled under the guide roller and bunches up. With this mod the if the filament stops, the roller stops with it, preventing it from getting pulled under. And the mod is so easy. I have a feeling the adapter wouldn't even be necessary, will test later.
@Snapmaker 2 жыл бұрын
Cool!
@OneManX 2 жыл бұрын
Can someone tell me what I have to activate so that the printer extrudes the filament outside of the print bed before the actual print starts. Thx
@curlystraights 9 ай бұрын
Im gonna try the spring tomorrow and look at dryers tomorrow hopefully it works lots of fraying and bunching in the direct drive
@curlystraights 9 ай бұрын
I cant believe that worked im so happy thank you 😂
@MrGoodcat1 9 ай бұрын
Nice to hear that✌️
@user-xb5zu6zu7j 2 жыл бұрын
Esun calls it TPE 82a. Very good filament. It's like rubber.
@MrGoodcat1 2 жыл бұрын
Yeah exactly. It is good but for RC tires it is too rough
@yousu3d517 2 жыл бұрын
awesome, just changed the spring?
@MrGoodcat1 2 жыл бұрын
Yes, it solved the problem
@RookieRay Жыл бұрын
When you say to use a dryer do you print with the spool in the dryer while it’s turned on ?
@MrGoodcat1 Жыл бұрын
Yes, i do it all the time
@user-mx2uu8fz4x Жыл бұрын
So...this spring is just work with Snapmaker ? how about other machines ? such as Ender3 S1
@MrGoodcat1 Жыл бұрын
I have only tried on snapmaker, but maybe it will work on other machines as well
@mateuszkrason9378 2 жыл бұрын
Could you share the step for the tpu adapter ?
@MrGoodcat1 2 жыл бұрын
You don't need adapter it won't work. Anyway it is available on Thingiverse and Snapmaker forum
@ninjaarcades7356 Жыл бұрын
Do the tpu printed tyres give decent grip 🤔
@MrGoodcat1 Жыл бұрын
Not really, it's better for drifting
@banner5432112345 2 жыл бұрын
could you provide a new profile TPU under cura 5.1.0 ???
@MrGoodcat1 2 жыл бұрын
I don't have a new, just use same profile in cura
@adorinadorin Жыл бұрын
So therecwas z problem with printer indeed
@curtreams5517 11 ай бұрын
Wow....this narration...early AI....doesn't quite have it down...
@MrBortxx 2 жыл бұрын
I don't believe the tire size change. That's not possible
@MrGoodcat1 2 жыл бұрын
What do you mean?
@MrBortxx 2 жыл бұрын
@@MrGoodcat1 you showed a badly printed tire and a good one and said they were the same file. The poorly printed tire was much much smaller than the good tire. I don't think it was the same file. Bad prints don't shrink that much
@MrGoodcat1 2 жыл бұрын
@@MrBortxxAhh It was much smaller cause i stopped printing there was no logic to continue. That was maybe 10th try, so i have rotated tire to see the result faster
@larryneagu1180 Жыл бұрын
Tips and Tricks? this video has 2 common knowledge tpu printing things, where are the tips and tricks?
ОВР Шоу
Рет қаралды 9 МЛН