Soaring to New Heights: Creality Falcon 2 Laser Engraver

Soaring to New Heights: Creality Falcon 2 Laser Engraver - The One-Week Check-In

Рет қаралды 1,491

Жыл бұрын

Ready for round two with the Creality Falcon 2 22W Laser Engraver? After a week, we're soaring to new heights with surprising results and tips. Join our one-week check-in and unleash your creativity with the Falcon 2. #CrealityFalcon2 #LaserEngraving #techreview
Thanks to 3D Print Lab, check out their website on www.3dprintlab.co.za
www.3dprintlab.co.za/product/creality-falcon-2-laser-engraver-22w/
www.makercase.com/#/
makerdesignlab.com/tutorials-tips/online-file-generators-for-laser-cutting/
www.troteclaser.com/en-za/laserable-materials
Join this channel to get access to perks:
kzfaq.info/love/f3WPY3wBTxK3vchV8EtZegjoin
Please consider supporting me on Patreon at www.patreon.com/fusionsource
If you like what I do, buy me a coffee at www.buymeacoffee.com/FusionSource
Follow me on Instagram, fusionsource3d
I would like to thank Jason for all the hard work you put into getting this video edited.
00:00 Introduction
00:57 Safety
03:40 Eagle
04:45 QR Code
05:08 Box
06:21 CHC Logo
07:27 Test Cards
09:00 Impressive Thick Cut
10:18 Other Materials - Trotec
12:46 Aluminum
13:55 Conclusion
3D Model Sites:
=============
www.thingiverse.com/
www.myminifactory.com/
www.yeggi.com/
Special Thanks:
=============
Val Wolff - My wife for all her wonderful support
Jason Wolff - All your hard work editing this video
3D Printing Nerd - Great channel with great knowledge
Makers Muze - Great channel, lots of great topics
Links to other Channels:
===================
Val Wolff - kzfaq.info
3D Printing Nerd - kzfaq.info/love/_7aK9PpYTqt08ERh1MewlQ
Makers Muze - kzfaq.info/love/xQbYGpbdrh-b2ND-AfIybg
Chep - kzfaq.info/love/sdc_0ZTXikARFEn2dRDJhg
--------------------------------
Want to send us something?
--------------------------------
Eugene Wolff
PO Box 59109
Umbilo
4075
South Africa

Пікірлер: 25

@brettturnage533 11 ай бұрын

Great review. Loved your excitement.

@FusionSource 11 ай бұрын

Thanks so much! Needed to hear that ;-)

@RYTHMICRIOT Жыл бұрын

Awesome stuff!

@FusionSource Жыл бұрын

Thanks, really appreciate that

@catfisherboy Жыл бұрын

I forgot to ask, do you like your new laser ?

@FusionSource Жыл бұрын

Yes

@jacquesblom2312 9 ай бұрын

Well, I can say that this got me stoked to get a machine like this. The possibilities are nearly endless and I was so impressed to see that it could cut through the 20mm pine. Regarding the plywood that you painted and sanded afterward, why not paint first and then engrave afterward so no sanding would be required?

@FusionSource 9 ай бұрын

Thanks for the comment. So what you suggesting is the inverse, I will try that. I did also find another method of using masking tape, I should do a video or a short on that

@jacquesblom2312 9 ай бұрын

Yes, I'm suggesting the inverse so it will be like the anodized aluminium you also did. Also, a thought that came to mind, and I might be wrong, was that perhaps the paint is absorbed too deep into the wood, having to sand off too much and letting the other layers come through.

@joshuahales3417 Жыл бұрын

Would love to see how this machine fairs against engraving on leather🧐

@FusionSource Жыл бұрын

I will be doing that soon, unfortunately I did not have any leather at the time. Maybe I will do a quick short

@leonievorster9742 Жыл бұрын

Hi there!!! Could you please do a video on engraving and cutting on acrylic. Also maybe on cutting mylar plastic sheets.....😊 Would love to see how it does with that. Thank you😊

@FusionSource Жыл бұрын

Thank you Leonie, I will add that to my list of items to test and report back ;-)

@leonievorster9742 Жыл бұрын

@@FusionSource That would be great. Thank You so much!!!

@FusionSource Жыл бұрын

@@leonievorster9742 Hi, I am trying to get my hands on some, as soon as I get I will do some experiments and a video

@leonievorster9742 Жыл бұрын

Wonderful, thank you so much!!! Looking forward to your review and video.

@johandewaal 11 ай бұрын

Great video! Where did you get the 3mm ply wood from which you lasered?

@FusionSource 11 ай бұрын

Hi, I got it from Takealot, www.takealot.com/wood-butter-ply-3mm-thick-28-boards-value-pack/PLID92640043

@geco-3dp480 Жыл бұрын

Are you going to test on Acrylic cut and engrave. Would like to see to what thickness you can cut Acrylic

@FusionSource Жыл бұрын

I will add that to my list of items to test and report back ;-)

@AverageAutomation 5 ай бұрын

Hey het jy die metaal online gekoop? Hier by my is nie veel plekke waar mens dit kan raw koop nie.

@AverageAutomation 5 ай бұрын

Toemaar het site gekry

@FusionSource 5 ай бұрын

A good site is www.sa-argus.com/industries-materials/. Where did you find to buy. You can also get plywood from Takealot, www.takealot.com/wood-butter-ply-3mm-thick-28-boards-value-pack-60-x-40cm/PLID92640043