How to Fix Crooked Clipper Blade!! The UNOFFICIAL Way to Do it! (TRY THIS)
Рет қаралды 47,856
3 жыл бұрын#barbershop #barber #hair #clipper
Hi Everyone! Welcome back!!
As you may have seen in previous videos, there’s usually 1 or 2 ways to doing it that I’ve talked about, but in the barbershop world, we always manage to find new ways to do it! Here ill show you a third way and it’s a little unorthodox, but it has worked many times for me when blades are crooked. Again, do this carefully as you will not be able to reverse the process lol but if you are like me and those adjustments need to happen, YOU DO WHAT YOU GOTTA DO. 😁
Follow me on my other platforms :)
Instagram - / staygold31
Facebook - / staygoldsofie
Tiktok - vm.tiktok.com/VyVbwe/
Links to Purchase Babyliss Tools
Gold Babyliss Trimmer
amzn.to/33YKBrX
Replacement Graphite Fade Blade
amzn.to/3j0lbOX
@ts5520 3 жыл бұрын
best barber channel on youtube you are clear and concise when you explain and straight to the point.
@Staygold31 3 жыл бұрын
That means a lot to me!! Thats how i enjoy other informative videos too!! Thanks for the feedback!! :D
@BigT1523 2 жыл бұрын
Hi there Sofie! My lopro fx clipper blade bracket stripped. Do you know where I can find a replacement 2 hole bracket for babyliss clippers??
@Osvanyer 3 жыл бұрын
Very helpful video Sofie! Thanks so much.. I’m learning a lot.. much respect ✊🏼
@Staygold31 3 жыл бұрын
Glad it was helpful! :D
@brandonruiz3744 3 жыл бұрын
Where can I buy a tensión spring replacement for the fx clippers?
@chrisblack6853 3 жыл бұрын
D.mn you know your ish I’m about to like and share this video fo sure 💯 salute
@Staygold31 3 жыл бұрын
Thank you! I appreciate that
@PsychologyJim Жыл бұрын
Very helpful and my misaligned clippers now fixed. Took a bit of searching; perhaps 'alignment' would be good in the title. But you've just saved me a few quid, so most grateful.
@Staygold31 Жыл бұрын
Glad it helped!
@rfouch85 3 жыл бұрын
Thank you Sofie!!! That was a big help.
@rfouch85 3 жыл бұрын
Oh. I also found it a lot easier to do it with the Needle Nose Pliers .
@Nikomairi 3 жыл бұрын
Awesome video and thank you for that handy tip.
@Staygold31 3 жыл бұрын
No problem 👍
@theofficialnelson1382 3 жыл бұрын
This video really helped me alot appreciate it 🤙💯
@Staygold31 3 жыл бұрын
No problem 👍
@bambinhoelrooki3239 Жыл бұрын
Best hack ever 💯‼️
@l.o1871 3 жыл бұрын
I zero gaped sum wahl walmart clippers but the cutting blade is so loose now. It falls out whenever I turned it on
@santosbulls1739 3 жыл бұрын
Finally!!💯
@Staygold31 3 жыл бұрын
yeee! thanks for watching!
@keepingitsquatchy 3 жыл бұрын
Nice. Never thought to do that. I'll try it out. On one of mine.
@Staygold31 3 жыл бұрын
sweet! im glad it was helpful
@JTEE143 2 жыл бұрын
Does anyone know the specs of the blade screws
@eazykut__4792 3 жыл бұрын
Wow I finally found the trick to fix mines thanks a lot!
@Staygold31 3 жыл бұрын
No problem 👍
@mester84 Жыл бұрын
My Silver Fx is making loud noise when full open i fix the plastic cutting blade brand new is very quiet in all other levels only in the las one please help me dont fine nothing in KZfaq
@reuploadindonesia 2 жыл бұрын
you know you look so good
@madarauchiha5433 6 ай бұрын
Hey Sophie, I bought the black fx trimmer with Graphite 2.0 blade. I oiled them well but they get too hot within 20-40seconds of use. is it normal?
@Staygold31 6 ай бұрын
that's not normal. That's a fresh set? there's no build up of hair inside?
@syaznikamal1201 3 жыл бұрын
Hi,do you know where i can buy the tension spring for babyliss fx? or does wahl tension spring fit on the babyliss?
@jordanjordan478 3 жыл бұрын
Pleas help
@grifgriffin6738 3 жыл бұрын
Same here, I need a tension spring.
@lahlah205 Ай бұрын
Could this be why my clippers are pulling/snagging hair? No matter how much I oil them they still pull hair and leave bald patches.
@slycedbymo_ Жыл бұрын
Thank you so much
@Staygold31 Жыл бұрын
You're most welcome
@fabiancalzadilla1167 3 жыл бұрын
Had this problem w my seniors n I kept trying to take apart and put back together but didn’t do much so I took it as a sign to buy sum babyliss oneslol
@Tigerlebarbier 3 жыл бұрын
Can you charge your fx clippers and trimmers with the same wire ?
@Staygold31 3 жыл бұрын
Clippers and trimmers of the fx series - YES you can ! And you can also use the same one for double head foil shaver if you turn it the right direction :D
@maxwelllebreux5198 2 жыл бұрын
do you know where i would be able to get a replacement tension spring?
@Staygold31 2 жыл бұрын
sadly idk bout replacement parts. try cust service line
@sampitz 3 жыл бұрын
Tnx Sofie.
@Staygold31 3 жыл бұрын
Ur welcome! Thanks for watching !
@rickthacutz 2 ай бұрын
Still a great video in 2024 because I got a crooked cutting blade on my lo pro fxone. This tip got me the help I needed and it cuts so smooth with the MIM blade. Thank you so much. Blessings!
@Staygold31 2 ай бұрын
Hell yes that’s dope!! Yoooo enjoy the MIM blade. It’s soooo good!
@MrRichard0027 3 жыл бұрын
How can I get a tension spring for the gold fx clipper
@grifgriffin6738 3 жыл бұрын
I need a spring also. You find out where to get one?
@hassaambaig8000 3 жыл бұрын
hi, for sum reason whenever im holding down the top blade while screwing in the the 2 screws, it looks zero gapped. but then when im finished screwing, and release my fingers from the top blade, the blades shift back, causing it not to be zero gapped
@josh2676 3 жыл бұрын
happens to me too, im stuck
@jhovannyserna1188 2 жыл бұрын
Did you find a solution to this because I’m having the same issue
@jamesbastivictoria3048 3 жыл бұрын
i have tried that close gap, i tested it on my skin and it scratch my skin
@LovejetsTeevee 3 жыл бұрын
Hey Sofie, my GOLDFX became noisier when I zero gapped them. It got louder when I have guards on them. Have you any idea whats the problem? Really appreciate your help and love your content! ♥️
@Staygold31 3 жыл бұрын
Yes please watch my other video about things u didn’t know about clippers. It’ll cover the guard situation!
@LovejetsTeevee 3 жыл бұрын
@@Staygold31 thanks Sofie!
@lovre7317 3 жыл бұрын
I have same problem with budget clipper surker k9s, and it's brand new. Tried to zero gap it and now my blade is kinda crooked. Any tips?
@Staygold31 3 жыл бұрын
not sure what clipper that is...but some brands have certain ones..that you can't even gap at all. :(
@jjoo3399 3 жыл бұрын
did you manage to fix it in anyway?
@alexthabarber8216 2 жыл бұрын
I’m having a problem with my protege gammas after I attempted to zero gap. When opening and closing blade doesn’t open evenly. Even when closing. Everything is tightened down evenly I switched brackets and that helped but it still doesn’t come open evenly completely
@daymongutierrez102 2 жыл бұрын
same with me is ur blade tilting and everything? and did u figure it out?
@auged5946 Жыл бұрын
My clippers top blade moved to the right. And it’s stick there what do I do?!!!
@mikebowerman989 Жыл бұрын
I think I jus fell in love
@SOLVALLE 2 жыл бұрын
Is there something I did wrong mine wont cut now
@shawnle7821 3 жыл бұрын
My red fx blade is bent thanks for showing me
@Staygold31 3 жыл бұрын
Anytime thanks for watching !
@805HandsomestBarber 3 жыл бұрын
Not the best camera angles.. But I think I figured it out.. Thank you.. Love the videos and I continue to support you.. 👍 🙏
@Staygold31 3 жыл бұрын
Forsure thanks for the feedback ! Thank you!
@lreid9277 3 жыл бұрын
Awesome video Sofie! It be great if you could do a video on how to disassemble the clippers. Also, is it possible to reduce the noise of the clippers?
@Staygold31 3 жыл бұрын
Thanks for tuning in! What do u mean by disassemble?
@lreid9277 3 жыл бұрын
Do a complete tare down to show how to deep clean or change colors/parts from different clippers.
@Staygold31 3 жыл бұрын
@@lreid9277 ahhh yeah thats one thing i dont do is breaking the tools apart and changing colors. lol Deep cleaning blade might be ok tho. Thank you!
@lreid9277 3 жыл бұрын
@@Staygold31 thx so much for replying back. I’m 43 and taught myself how to cut at a young age but never got my license. You have inspired me to get a Cali license. I have your signature Clipper and Trimmer because I’m a fan. Thx for all you do in the industry
@jessethebarber7345 3 жыл бұрын
I did this when I first got mine but I bent the spring with a pair of pliers
@Staygold31 3 жыл бұрын
Great to use too!
@ezoim 3 жыл бұрын
Why are clipperz naturally slanted out the box!!!? I never understood thiz!!!
@chicagoebk3169 6 ай бұрын
I don’t underztand why you uze a z inztead of a s
@ezoim 6 ай бұрын
@@chicagoebk3169 lvl: 71 magi
@infiniteg7852 5 ай бұрын
They don’t care about us
@mikerob1471 Жыл бұрын
Babyliss trimmer blades move outta of place after setting...do you have a solution for this?
@DreamGaming12 4 ай бұрын
i have a similar issue, when I set it and go to tighten it, the right side moves up. I found kinda a kind of solution, so first tighten down the lever screw real nice, then while setting the main static blade, hold your thumb on the left edge while tightening the screws, it offsets the torque force of the screw by a lil bit. Lmk if it helped
@quaisontasherete1770 3 жыл бұрын
I dropped my babyliss trimmer blue edition and it started sounding loud and not cutting hair..how do you fix this?
@Staygold31 3 жыл бұрын
dropping the tools can really ruin the product. Its like dropping a camera. YIKES. Try to take the blades a apart, clean and re align it all. Spray some disinfectant and see what happens.
@quaisontasherete1770 3 жыл бұрын
@@Staygold31 it doesn't work
@goldenagebarbergab3728 3 жыл бұрын
Recheck the blade while clipper on,slightly difference gap because the spring will streched..
@creaturefromthebuttcracklagoon Жыл бұрын
I used this after I dropped my clippers, fucking life saver I thought I was gonna have to replace the spring completely
@grasshoppa1818 3 ай бұрын
I was in the middle of doin this but then I really had to poop so I took that as a sign to go poop so I idk how it turns out..
@dailygrindbarber1177 3 жыл бұрын
My Rosefx pulls hair when taking out bald line, anyone knows why??
@Staygold31 3 жыл бұрын
take it apart clean it and oil and put it back. see what happens after that
@jeremyurdy9641 3 жыл бұрын
My blade doesn’t run straight when I zero gap it. I’ve tried everything. My edges kick up over the top blade when I turn it on, almost in a u shape!?
@Staygold31 3 жыл бұрын
What tool is it ?
@jeremyurdy9641 3 жыл бұрын
@@Staygold31 rose gold fx
@Staygold31 3 жыл бұрын
Zero gap lower than what ur aiming for and check blade while it’s on if it moves up too high
@jeremyurdy9641 3 жыл бұрын
Yeah i have it cutting blade set half way just so I can use it. When I have it set like that the middle of the cutting blade stays in the middle but the corners are zero gapped. Hard to explain lol
@austindook 8 ай бұрын
Bro sameeeeee
@1ANN 2 жыл бұрын
How come my slider looks different from yours? And I noticed that my last part of silver fx’s that the slider was different and the right side of the slider kept moving up and down which moved the cutting blade to over lap the static blade
@alexthabarber8216 2 жыл бұрын
Did you ever get it fixed?? I ended up changing brackets & it honestly helped a lot but still opens uneven a bit
@1ANN 2 жыл бұрын
@@alexthabarber8216 I noticed that one side of the bracket was looser than the other. So I took off the bracket and bent the loose side in a bit more and it worked
@anthonydaniel172 3 жыл бұрын
dam u answered a big question for me rn
@Staygold31 3 жыл бұрын
Glad to hear that!
@desmondmitchell5602 3 жыл бұрын
That's what am talking about lady I know some guys that wont do that talking about man I dont know how just try lol
@Staygold31 3 жыл бұрын
Hahah i know people get hella nervous about it. I’m def going to try before i say i can’t do it
@desmondmitchell5602 3 жыл бұрын
@@Staygold31 yep that's right plus all u got to do is put it back the way you took it apart lol
@myneglectedtruth7924 6 ай бұрын
My blades are in line when lever closed, when lever opened they go slanted
@Hmura11 3 жыл бұрын
Hi thus helped alot! Sometimes when i'm turning on my clipper it doesn't turn on, i have to move the on/off switch a couple of times before it goes on. Am i the only one with this problem ?
@Staygold31 3 жыл бұрын
thats crazy weird, call the customer service line and try to get it swapped out
@robertosilva7050 2 жыл бұрын
Eu sou brasileiro tive esse mesmo problema sei como resolver isso abra toda máquina cuidado com todas as peças e lá você vai apertar o parafuso do botão liga e desliga ele deve está desregulado já cuidado cada peça em seu devido lugar
@robertosilva7050 2 жыл бұрын
Quando você for abrir a parte de baixo onde tem um ímã 🧲 ele é pequeno ele se encaixa em baixo quando retirar cuido todas as peças em seu devido lugar tenha calma pasciencia
@robertosilva7050 2 жыл бұрын
Ah tem mais pra você desparafusar não frente onde está nome babylissPro você vai achar algo bem fino pra desencaixar nome é lá vai está os dois parafusos que desmonta toda a máquina 💈☺️ pronto ✅ todos os segredos revelados!!!
@J_AzBarber 2 жыл бұрын
🙏🏼
@mohdhasniseventiesseventie1452 3 жыл бұрын
Love u..
@ndytaf2276 3 жыл бұрын
Does anybody know where I can find the tension spring mine broke 😆 🤦♂️
@josh2676 3 жыл бұрын
try alibaba or aliexpress or dhgate
@ndytaf2276 3 жыл бұрын
@@josh2676 thanks I’ll look into it.These companies were not in mind 🤦♂️ I really need that tension spring. I kept sending emails to babyliss and conair and they just sent me to each other. Thanks 🙏
@jordanjordan478 3 жыл бұрын
@@ndytaf2276 do you find one??
@ndytaf2276 3 жыл бұрын
@@jordanjordan478 No I’m really bummed out I think ima look into the wish replica clippers maybe it has the spring 🤔
@grifgriffin6738 3 жыл бұрын
I need the tension spring. Anybody know how to purchase it?
@sediqthebarber241 3 жыл бұрын
What kind of gold blade is that? Doesn’t look like a babyliss blade
@Staygold31 3 жыл бұрын
its the gold babyliss fade blade! they have those now
@doomcity1785 Жыл бұрын
I found a better way then this is this video doesn’t work but thanks to this guy in the video to help me understand what’s going on with the spring
@grasshoppa1818 3 ай бұрын
Do you need help? Are you having an aneurysm??
@sailordixie 3 жыл бұрын
it would help if you didn't bounce the clippers around so much. Just a thought for the next video
@Staygold31 3 жыл бұрын
noted for next time!
@ramgray50 Жыл бұрын
Also remember, if you remove the blades, always clean you clippers!
@nothingimportant9806 Жыл бұрын
Pls save my life
@Tony2Phony 2 жыл бұрын
She’s fine
@bigdork2481 Жыл бұрын
that's not how i did it...
@hotstuff697 Жыл бұрын
good camera angle with closeups
@Staygold31 Жыл бұрын
I gotta make a better update video on this 🙏
@barber_andii413 10 ай бұрын
I have been looking at many vid for like a month cus I need to do the same thing on my tpob troll clipper that is as same to zero gap like that babyliss 🥇🫡🫡 Thanks hun Il appreciate your help alot 🤝🏻
@Staygold31 10 ай бұрын
Glad I could help!!
Seancutshair
Рет қаралды 275 М.
Eater Straw Hat
Рет қаралды 24 МЛН
Sofie StayGold
Рет қаралды 178 М.