Soil Moisture Sensor on batteries with ESP07 running ESPHome

Soil Moisture Sensor on batteries with ESP07 running ESPHome - Start to Finish

Рет қаралды 3,048

Күн бұрын

PCBWay Shared Projects - www.pcbway.com/project/member...
Get $5 for your first order - www.pcbway.com/setinvite.aspx...
In this video, I'm creating a battery operated ESPHome sensor to measure the moisture content in my backyard garden. The sensor is built using the ESP07 (ESP8266) board where I removed the power indication LED to save on battery power.
The device uses a capacitive soil moisture sensor and two 18650 batteries to be able to operate outside during the growing season and provide updates on the soil humidity so that we can use that data to control the irrigation that I have set up already.
You can check the video about the irrigation system here:
• How to Build Your Own ...
The video covers the entire process from start to finish so you can easily replicate it and build your own sensor.
Tools and materials used in the video:
ESP8266 ESP07 Module - s.click.aliexpress.com/e/_onP...
Capacitive Soil Moisture Sensor - s.click.aliexpress.com/e/_m0W...
Sensor with ESP32 Module combo - s.click.aliexpress.com/e/_DmH...
USB to Serial adapter - s.click.aliexpress.com/e/_oCH...
Jumper Wires - s.click.aliexpress.com/e/_mtH...
Mini Breadboards - s.click.aliexpress.com/e/_on0...
Mini PC for Home Assistant - s.click.aliexpress.com/e/_okQ...
Soldering Rework Station - s.click.aliexpress.com/e/_m00...
Multimeter - s.click.aliexpress.com/e/_m0C...
Wire Snips - s.click.aliexpress.com/e/_omw...
ESD Safe Tweezers - s.click.aliexpress.com/e/_ol7...
Device code and written instructions are available on my website article:
www.tastethecode.com/soil-moi...
Support my work on Patreon so I can continue producing free content and tutorials!
/ taste_the_code
My recording gear:
Canon M50 Mark ii - s.click.aliexpress.com/e/_olp...
Samsung A71 - s.click.aliexpress.com/e/_Ezb...
SJ400 Action camera - s.click.aliexpress.com/e/_omr...
USB Condenser Microphone - s.click.aliexpress.com/e/_mq9...
Tripod - s.click.aliexpress.com/e/_Eyn...
Phone tripod mount - s.click.aliexpress.com/e/_oDT...
Soil Moisture Sensor on batteries with ESP07 running ESPHome - Start to Finish
#esphome #homeassistant #smarthome #esp #soilmoisture #tastethecode
Main Site and blog: www.tastethecode.com
Facebook: / tastethecode
Instagram: / taste_the_code
Twitter: / taste_the_code
0:00 Introduction
01:03 ESP8266 ESP-07 Module Overview
02:08 Sponsored Segment
02:53 How to flash the ESP-07 module
03:43 Wire the ESP-07 for flashing
04:29 Flashing demo with Arduino IDE
07:09 Removing the power LED from the ESP-07 module
08:41 Flash ESPHome on the ESP-07 module
11:50 Connect the soil moisture sensor
13:51 Powering the sensor from the battery
16:37 Enable deep sleep in ESPHome
19:11 Preparing the enclosure
20:44 Soldering all the components
22:50 Final assembly
23:34 Final Test
26:10 Outro
Get exclusive Taste The Code t-shirts and merch at
teespring.com/taste-the-code
Hosting discounts over at Dreamhost
click.dreamhost.com/SHiw

Пікірлер: 17

@havemannolaf Ай бұрын

Thank you !

@TasteTheCode Ай бұрын

You're welcome!

@SlavkosHobbyChannel 2 ай бұрын

The video is the reason why I love doing things from scratch, it is fun, and you can learn a lot, but also is there a similar cheap version already made that can be connected with an assistant? probably not, so you enjoyed doing it, and also you made a great gadget, nice job!

@TasteTheCode 2 ай бұрын

Even if there is a commercial product thst is cheaper and better made, it won't provide the learning experience. Thanks for the great words! 👍👍👍

@JesusRocksAlways Ай бұрын

Hello again, ignore my last comment, I figured it out. For others who may need help, connect your VCC of the sensor, in my case, the Capacitive Soil Sensor V2.0, to one of the digital output pins of your ESP32 and then set it HIGH upon waking out of deep sleep mode and to LOW just before the ESP32 goes back to sleep. - Sleep for an hour - ESP32 wakes up - Activate the soil sensor - Read the level - Email or text if level is above ~580 - Deactivate soil sensor - Set ESP32 into deep sleep mode - Rinse and repeat every hour, day, month, whatever you set it to So far, my 3.7v 18650 li-ion, 400mAh has not even dropped and it's been running for a day, waking up every hour for now. Once I'm convinced it works, time to set it to a daily wakeup and put it all into a portable container. This video was awesome, btw !

@TasteTheCode Ай бұрын

Awesome, I'm glad you managed to figure it out, and yes, I haven't done this to mine yet but I will as it uses some power unnecessary. I was thinking about using a transistor to turn it on but your solution made me realize that I do not need to as it only uses a few milliamps. Do you maybe have the ESPHome configuration code to share?

@JesusRocksAlways Ай бұрын

Hello all ! I have this running, however, the Capacitive sensor drains the battery even with the ESP32 is in deep sleep mode. Is there a way to "wake-up" the sensor when the ESP32 wakes up? (e.g. put both to sleep)

@XprecisionBR Ай бұрын

What do you think of using the ESP-01S with those expansion boards like RGB LED, DHT11, etc? I'm testing it with CR123A batteries.

@TasteTheCode Ай бұрын

I wanted to use it at first because I have plenty of them but the problem is that they do not have analog input. For things like I2C, they should be perfect.

@ristopirhonen3169 2 ай бұрын

How long does it run with one charge?

@TasteTheCode 2 ай бұрын

The run time greatly depends on the duty cycle of the deep sleep. I'm still testing this but if it runs for 30 seconds every 3 hours, it should last for about 45 days.

@thebatu89 2 ай бұрын

Hi, have you tested it with espnow? Could it last longer since it doesn’t connect to wifi

@TasteTheCode 2 ай бұрын

No I haven't. It might be an interesting thing to explore but I guess it will also need a receiver.

@krusej23 2 ай бұрын

What does the moisture level correlate to? Is it volumetric water content?

@TasteTheCode 2 ай бұрын

A capacitive soil moisture sensor measures the dielectric permittivity of the soil, which is indirectly related to the volumetric water content. They use an oscillating electrical field to measure the dielectric permittivity of the soil. The presence of water affects the capacitance of the sensor, because water molecules align with the electric field, this changes the capacitance value. This change in capacitance is then correlated with the soil's moisture content, outputted as a change in voltage.

@jtauscher 2 ай бұрын

Do yourself a favour and cover the pcb with hot glue or similar. Otherwise it will be destroyed by the humidity of the soil within 1-2 weeks. I "painted" them with hot glue and worked with a hot air gun to keep the layer thin :) Other than that - interesting project! p.s.: saw on second sight you covered the edge of the pcb. I coverd it completely including the smd components and drove it completely into the earth to have more accurate results.

@TasteTheCode 2 ай бұрын

Thanks, that is a nice suggestion. I've seen people using nail polish to cover PCBs. I guess I can add some hot glue to the board and spread it using my hot air gun. I'll see how it goes. As for the edge, yes, I covered it with epoxy so to prevent any ingress in the board itself. I was considering to cover the whole thing but I was worried that I might mess up the capacitance and the readings.