Definitely your personal experience enhancing our knowledge thank you so much.

a Lejaaand person taking a lejaand initiative...! hatts of guruji🙏❤️❤️

Very nice information video Thanks sir ji

Very informative sir nice keep on sharing your knowledge it will help us... Tq😄

Good explanation with experience. Interested things in robot are 1:- Less weight. 2:- Use of feedback controller for each motor will be better option to monitor and predict the faults. 3:- Use of IoT. Every product have cons, this robot also have some disadvantages. 1:- you have shown it in lab but not in site, I think in site you may know what actual problems you have to face. 2:- the cleaning quality not much better with nylon brush compared to microfiber. 3:- At wind speed 180km time, no need of cleaning, due to dust will fall on module. 4:- As you said, middle wheel you can adjust simply, but it's not possible for long row structure. 5:- the robot load on structure is not balance, it may cause the robot fall down during heavy wind speed. I have given my feedback as per current robot market and their performance. So please take it in a good way. Thanks 😊

Bro this information is very knowledgeable!!

Thanks for the wonderful information bro 👌👌👌👌

Nice work dear

Sir on glass surface its not easy to make scratch because glass very heard in my experience

Hope we get a cleaning solution for bifacial modules as well.... All the traditional bots are cleaning only the upper part.... For a bifacial the bottom part becomes a challange

Hanzhen harmonic drive gear , strain wave gear reducer, robot jonit , over 30 years experience

An interesting concept indeed. But how does the robot stack up against the harsh weather conditions of the UAE? I see a lot of exposed DC motors and the electronics control unit doesn't look like it can be IP67 rated.... long term feasibility will be an issue.

Sir Dry cleaning robots is very efficient if talk in terms of water storage but when we talk in terms of the cleaning I don't think it is that much effective. For example the bird's poop. The bird's poop is something which cannot be removed with out the use of water and proper brushing. I have personally visited many places where the solar system are install during my internship. And found huge bird droppings on the solar panels.

You might want to talk about aerial thermography some day

☀️

Thanks a lot sir

I think same customize robot installed at adani 648MW tamilnadu(kamathu) plant.

Good information. Have some challenges which I shall share in details.

I think that rain water should be harvested, used for cleaning and filtered and reused.

can you tell what is the selection procedure for buying most suitable robot for particular plant

Sir one request plz.... Aap video banao sirf hindi me

Would you guide me how to run a grid tie solar inverter in power failure.

Very informative sir, but what is the cost of 1 unit?

T/F testing pe video bnna do ek sir

We have installed a 24-degree tilt angle, will we need additional structure for this report?

Sir Dubai me pv cell manufacturing ka plant he agr he to kha pr kindly reply

Sir please tell me which brand inverters are most reliable in indian market like toyota cars all i want is simple performance but most reliable for my 150kw on grid plant.

Sir i have 5kw plant,adani mono perk panels and phocos hybride inverter i have a problem of voltage fluctuation in peak hours ,inverter drop powere from 3500kw to 500-600 repetedly .and voltage fluctuat in load pllzz.. ans

Is it still common that robot is locked-up during moving on a deformed PV array?

How to manufacture them

Good nolege sir,, price

Sir I want to manufacturing for fully customisable robot with solar charging

Hi sir

I think weight of this robot definitely will affect the solar cells

Bhai Hindi me bola kar