Thank you po. Follow up on this SCC testing will be uploaded soon.

Thank you sir.

If someone will sponsor or lend the 60A versions because they are more expensive and I currently do not have the budget for those.

Ok po sir. Icheck po natin yan.

sure po

Naghihintay lang po ako ng araw

Sige po sir.

Nakapila na po yan sir.

@@SolarMinerPH gusto ko rin malaman Sir. May plano ako bumili ng bagong SCC for my small build.

opo nakabili na po ako nyan. Gawan ko ng video pag may free time na po

Congrats sir :) hehehe

Sa lithium preset voltages na sya kung gusto mo icustomize yun mga charging and min max voltages ay User po ang gagamitin mo.

Nakapila na po yan sir. Subscribe lang po kayo para makita nyo pag nagupload ko na video for elejoy.

post nyo po yun link kung saan yan mabibili

sige po sir.

gamit ka po pzem -015 para makita talaga yun capacity ng battery.

2200W /12v = 183Amps 2200W/ 24v = 91Amps lower voltage means higher current so you need thicker wires and higher amp BMS. Sa 183amps super kapal na wire na ang kailangan mo nyan from battery to inverter. Mas mahal ang makapal na wire at high current BMS.

Yes sa bench power supply lang po. Pag sa solar panel wala naman issue. Hindi ko lang po matapos yun follow up video kasi yun binili kong 2 solar panel magkaiba ang output so kailangan ko pa bumili ibang solar panel na same talaga output para patas pag tinetest.

@@SolarMinerPH thanks po sir! =)

Yes ok lang

Inverters like snat/snadi/srne and hybrid inverters has that option.

hindi po ako nagbebenta sir :)

wala pa po. Soon po bubuksan ko

Soon po

tnx sir.

I think its because it is connected to a power supply. It is probably expecting the voltage or amps to change when the mppt is running but it's not. I will have to test it later to see why it behaves that way when connected to a power supply. But I did test it on a solar panel and it is charging continuously although I can still see the watts jumping every 20 seconds. I will upload the video on that soon.

@@SolarMinerPH Ok thanks. Looking forward to the new video then.

Soon po

Hindi po safe. The BMS is the one keeping it safe.

You need 40A sobra na po sa 20A ang 4 pcs ng 160watts na solar panel

@@SolarMinerPH kahit po naka 2 series 2 parallel?

Baka po ma sponsoran tayo hehehe

Nababago setting ng srne.

Malalaman po natin yan soon. Dapat side by side para sure at gamit ang same watt meter at hindi yun display ng scc kasi may mga scc na hindi accurate ang display. This week po upload ko ng elejoy.

ano po sa tingin nyo sir legit po ba?

@@solrista664 feeling ko mas efficient srne hehehe. Ang liit kasi components ng elejoy.

Hindi po magwowork

@@SolarMinerPH salamat po

Baka dahil sa bench power supply sya nakaconnect try ko bukas at solar panel ang gagamitin natin check ko kung same parin kasi kung every 20 secs bumababa yun harvest laking bawas nga nyan.

Same problem sakin sir.. pag float nag stop siya ng mga 20 seconds pero babalik naman pagtapos ng float.. .. rason jan ung float ata sir

Same lang po na ok sa lifepo4. May konti lang na difference sa effeciency. If you have the budget get epever for the tiny bit of efficiency. Kung limited budget get the srne since it has a preset settings for lithium battery sa epever it is more expensive and needs additional item like bluetooth or mt50 module para magamit safely sa lifepo4.

@@SolarMinerPH thanks po 😁 ang epever pala kelangan bantayan para di ma over charge

14.6 po ang totally full pero 13.8 ay almost 99% na po. Depende sa Amps kung gaano katagal icharge ang battery. Example po ng calculation ay sa 100Ah na battery ay machacharge ito ng 1 hour kung 100Amp ang charging current mo. 2 hours kung 50Amps. 5 hours kung 20Amps. Just divide the Ah by the Amps to get hours.

@@SolarMinerPH salamat broo ang gamit ko po dc power supply na 0.8Amps nasa 19V po testing ko lang po habang wala pa solar panel hehe 😁

Sa 24 volts lang po. Sa 12v around 120watts lang. Just multiply amps to battery voltage para maestimate mo kung ano ang kaya nya.

@@SolarMinerPH ok po sir, pwede po sya series ng 2pcs n 100 watts n panel tma po b sir?

@snip3rfox pwede po

Probably sa power supply ang problem. It is probably expecting the voltage to go down since that is how the solar panel will react but on a power supply it will try to maintain the set voltage and current. We will know soon kung ganyan din ba sya magreact pag sa solar panel sya nakakabit.

Voc po ang icheck nyo 100v ang max ng srne 20a.

@@SolarMinerPH 30ah mppt ko boss. Tapos osda 2pcs. 340watt solar series ko sa 24v battery.. Peak Power(Pmax) 340.00 Maximum Power Voltage (Vmp)38.90 Maximum Power Current(imp)8.75 Open Circuit Voltage(Voc)47.65 Short Circuit Current(sc)9.21 Ito specs ng solar bos pa tulong po baka kasi mali ako sayang scc. Salamat.

@@SolarMinerPH ok lang po ba? Para saan po yang vmp na nasa mppt naka lagay boss

sa 20A na srne ang max voltage ay 100V so kung less than 100v ang VOC ng panel pwede po sya. Kung ang VOC ng panel mo ay 47.65 that means pwede ka pa n mag series ng 2 panels na ganyan since magiging 95.3v yan pag nakaseries and its still below 100 volts. VMP ay voltage ng panel under load. Ang kailangan mo tignan ay VOC

@@SolarMinerPH salamat po ❤️

Kailangan nyo sir mt50 or bluetooth module or yun usb connector kasi wala sya lithium na preset. Pag sinet mo naman sa User ay mataas yun voltage na nakadefault kasi pang lead acid sya kaya kailangan mo talaga ng way para maset yun voltages dahil wala way para maset yun sa mismong scc. Yun usb cable ang pinakamura less than 200 pesos yata para maiconnect mo sa computer at dun mo pwede iadjust

@@SolarMinerPH cge, try ko buy ng mt50. Next problem is figure it out anung lipo4 battery type ilan stack for this 20amp version. Para ma maximize ko. Ty idol sa reply mo. God bless

@@rsasidera 100Ah na battery po ang sakto dyan kasi yun ang sakto na capacity na kaya ng 20A na scc punuuin sa isang araw.

@@SolarMinerPH salamat idol

Nag upgrade na po ako ng epever 40amps. Balak ko 24v batt saka 1kw na pv. Yung 40amp idol may preset na for lifepo4 na 12v at 24 sa battery settings nya. Kahit di na pala need ng mt50

Ano po solar panel at battery na gamit nyo? Hindi po kasi nakadepende ang specs ng scc sa inverter kundi sa max wattage ng solar panel at battery na gamit mo.

@@SolarMinerPH 450w Po Trina panel tapos 12v gel type battery

40A pataas na SCC po

Thanks sir

Battery is 13.1 it is not full. Yun source ay hindi tumitigil dahil naka turn on lang sya. kung tumititigil sya dapat ay tumigil din dapat yun epever pero hindi it is isolated to the srne only. I also timed it it is exactly 20 seconds every time nangyayari yun. So sa mppt nya yun issue.

Join our group on facebook facebook.com/groups/solarminers/?ref=share_group_link and post your results there

kc bro ung harvest ng epever mppt sa 640w to. only 390. d nga naka abot 400w. samantala. ung fake mppt na pwm. naka 420 pa. so. saan ung sinasabi mong efficiency ng epever na 97% harvest?

@@marblemarbs5781 well report that to epever or your seller and claim your warranty kung hindi ka makaharvest ng tama. Like I said even epever claims that efficiency and that's what I got on my tests. So if you're not getting the efficiency claimed by the manufacturer then possible defective yan item mo.

20Amp ba na version yan?

Please post your setup and how you got your results on the facebook page para macheck natin. I am sure there is an explanation why ganyan ang result sayo.

How did you check the output? Same capacity ba ng battery when you tested it? Did you test it at the same time. I have a second video on this pero hindi ko palang natatapos iedit pero still the same ang result na mas higher ang output ng epever ko.

Ano ba version ng epever ang binili mo yun 20a din ba? Ang alam ko sa 20a version 480watts lang ang maximum at 24v battery at 240watts lang sa 12v. Check the efficiency curve sa manual ng epever mo dahil magkakaiba ang efficiency curve depende sa setup ng solar panel mo. Kung mas mataas ang voltage ng panel vs sa battery mas bumababa ang efficiency. If its not hitting close sa efficiency curve na nakalagay sa manual pwede na defective yan scc mo at ipawarranty mo na agad.

There is no incentive for me to post something na hindi totoo. Epever is not paying me and I bought it with my own money. My tests are just confirmatory tests, meaning I just confirmed what the manufacturer claimed. It is right there on your manual the efficiency curve of both SCC. And on both SCC that I tested they are close to what is written on their manual. Its either there is something wrong with your setup or your SCC is defective dahil kung tama naman ang setup mo pero mababa efficiency na nakukuha mo versus sa nakalagay sa manual eh defective nga yan. I dont think epever would put those efficiency graphs on the manual kung hindi totoo.

Find iamsolarminer on facebook Ano po nakakahiya dun? if you have proof then post it they will actually thank you for sharing your results? Tatanggapin mo nalang ba na 30% lang ang harvest mo sa epever mo at magrarant ka lang dito sa youtube? Magreklamo ka po sa binilhan mo dahil hindi yan normal? 30% is not normal so stop insisting na fake ang results ko dahil I have proof. if you are getting lower than 90% then ask for a warranty or refund because even the manufacturer is claiming more than that. I don't know what your goal is because if you want to know the world that epever has 30% efficiency well marami magpapatunay na hindi yan totoo dahil madami po ang users ng epever worldwide its not a no name brand. I take offense in you saying na nabiktima ka ng vlog ko dahil all I share on my vids are backed with proof its not my fault that you have a defective device or a faulty setup.

You can't even answer my simple question kung ano version binili mo.

​@@SolarMinerPH 30 amps na epever kung may mssger ako ng mssger mo ma send ko sau. dami ko video. para makikita mo papano harvest ng epever cnasabi mo

bugok legit ang epever baka di ka marunong mag test sisihin mo yun vlog dami namin epever user pwm at mppt internationally