Soldering Tutorial for Beginners: Five Easy Steps

Рет қаралды 2,742,301

10 жыл бұрын

If you've ever wondered how to solder electronic components, you've come to the right place! This video breaks down soldering technique into five steps. I'll show you how to solder through-hole components as well as how to solder wire.
Brought to you by oneTesla! Check out or DIY Singing Tesla Coil Kits at onetesla.com
The oneTeslaTS is a DIY musical Tesla coil kit, which shoots sparks up to two feet long and plays music using electricity itself! The kit includes everything that you need to build your own 10" musical Tesla coil. The SD interrupter (its musical controller) can connect to a MIDI input or read MIDI files off of an SD card directly. Learn more: onetesla.com/products/kits/one...
tinyTesla is an SSTC mini musical Tesla coil kit with USB connectivity. Ideal for beginning and advanced Makers alike! tinyTesla is the DIY mini musical Tesla coil kit that anyone can build. Heat up your soldering iron and prepare your tools! Once complete, tinyTesla shoots four-inch sparks, plays music and wirelessly excites fluorescent tubes.
Check us out at:
onetesla.com/
&
Twitter: / onetesla1
Facebook: / onetesla

Пікірлер: 1 000

@_s_9920 4 жыл бұрын

finally a tutorial where the uploader doesn't drone on for hours about how they first saw a soldering iron back in the 60s and then stops mid-video to rant about lead-free solder.

@5LoZeRzPrO 3 жыл бұрын

Rant about lead free solder lol. That’s all I heard in my class.

@tvheadcontent Жыл бұрын

Funny

@AE-bm4no Жыл бұрын

Back in my dad we didn't have fancy shmancy solder. Our solder was made from baby dolphin genitalia and it was the best!

@michabula5763 Жыл бұрын

@@AE-bm4no "Back in my dad"? Umm... Okay...

@hectorgaldo5465 Жыл бұрын

This written instruction get in the way.

@chuckconrad1125 8 жыл бұрын

As an electronics instructor at the high school level, I appreciate the beginner level tutorial. I think my students got more out of your video than an hours worth of my instruction. Good job

@Albanez39 4 жыл бұрын

I've been to a professional high school for Electronics. Unfortunately, it sucked and didn't teach us much. We basically just put solder on the boards, and sucked it up with a pump...we did only a couple of projects, and they were collective...so I learned nothing and did nothing. I've been trying to solder these few years, to fix LED bulbs, cables and other things. I've never managed to succeed. I am using lead-free solder and a 60W (450degrees) iron. I'm cleaning the tip and using flux, but I can't manage to solder ANYTHING. The solder sticks to the iron, or the small sphere falls on the table. Solder WILL NOT stick to copper wires or circuit contacts. The tip of the iron takes 8-10 seconds to melt the solder, and the only way to work is to use the body or base of the iron tip to melt the damned solder. What the hell am I doing wrong? Is it the solder's fault, the iron's the flux's???

@Albanez39 4 жыл бұрын

@BIGREDnotw 4 жыл бұрын

@@Albanez39 i think the main issue is you're using Lead-free solder. Lead-free solder is much harder to heat up and requires a preheater. Try using some 60-30 leaded solder with rosin core. much easier to heat and to work with.

@BIGREDnotw 4 жыл бұрын

@Adam White rosin core leaded solder, 60-40 ratio is fine. Probably fine in diameter. Depends on how big your pads are.

@Real88Mad 4 жыл бұрын

Same here, it’s easy, simple & direct which is a wonderful effort

@chrismichaelis7880 10 ай бұрын

I wish more how-to videos were like this. Clear, concise, and right to the point. Beautiful!

@geoffnoller3135 9 ай бұрын

Couldn't agree more. Outstanding!

@karen5776 7 жыл бұрын

This will be my first attempt at soldering and I really appreciate you taking the time to explain how to do this correctly. Thank you!

@kayleighwhitehurst6037 Жыл бұрын

Brilliant! 8 years on and you're still teaching new people. I was taught to solder at school but forgotten most of it over the intervening decades. This is a brilliant reminder. Thank you.

@techpriest4347 8 жыл бұрын

One thing that really messed me up as a beginner was no one had told me that you're not supposed to apply solder to the iron, but to the piece the iron heats up. Wish that had been spelled out, would have saved a few early projects

@GeddyRC 8 жыл бұрын

Brand new to the concept of soldering here, but looking to take on a Raspberry Pi project that will require a little bit of it. I assumed the purpose of the iron was to melt solder as well -- glad I found this video!

@urgamecshk 7 жыл бұрын

She says it two minutes in

@techpriest4347 7 жыл бұрын

I wasn't talking about her, I was talking about how people who had taught me electronics repair in the past had failed to mention that

@demoinja3695 7 жыл бұрын

i know that feel bro Q.Q

@brieflycake 7 жыл бұрын

yeah but she says it two minutes in

@VideoCesar07 7 жыл бұрын

I just wanted to give you a huge hug and thanks for posting this. My soldering always looked sloppy because I did everything you are NOT supposed to do. After seeing your video I finally tackled a project I had been dreading and by following the simple things you mentioned it was really quick, painless and...it worked. Thanks!

@BraddockB 6 жыл бұрын

Exactly what I needed to know. I don’t know how I went so long without doing this myself but you just gave me all the confidence and knowledge I need to do it right the first time.

@PROcrastiDRIVESVofficial 8 жыл бұрын

This tutorial is so perfect, I don't think the internet needs another soldering for beginners tutorial. Cheers!

@cheasea 8 жыл бұрын

+PROcrastiDRIVE SV There was one major flaw in how she attached the wires. They should be tied together. Good video though

@PROcrastiDRIVESVofficial 8 жыл бұрын

+cheasea Ok, didn't notice that. I needed to solder a new DC jack onto an ASUS laptop motherboard (never tried anything of the sort before). The tip on heating the metal plate and wire, then feeding in the solder made it so damn easy. Except when one especially thick pin on the Jack wouldn't get hot enough. That was the only sketchy bit, I didn't want to turn up the iron too much for fear of melting a very expensive board lol. I eventually used the force or something but there's definitely enough solder on it now.

@cheasea 8 жыл бұрын

gotta watch out for that temp!

@arslanxelan9606 3 жыл бұрын

This is the best introduction to soldering I have seen yet. Straight to the point and very clear. Thank you!

@derekmartin7171 3 жыл бұрын

You answered every question i had after unsuccessfully attempting to solder for the first time. Thank you for doing that in such a direct manner. It makes me feel as if my intelligence and time were respected. Cheers!

@noel4715 6 жыл бұрын

Your voice is really comforting. Nice vid!

@ClearAlera 2 жыл бұрын

Fantastic video - short, sweet and to the point! I had a course in college where they had us solder components to a board but I only knew the most basic objective, which was somehow getting the melted solder into place and then letting it cool to harden. I had a tough time because I kept trying to just melt the solder directly from the iron onto the component; I never knew you were supposed to heat the component first and use that to melt the solder. Live and learn!

@Qinti101 6 жыл бұрын

Thank you for making videos like this. I am starting to dabble in electronics and learning how to solder is a must in this case. This video is a great starting point before practicing on some test boards.

@LOTIL62 8 ай бұрын

This is an example of a tutorial done right. Examples are clear, explainations are quick and to the point. This is possibly one of the best and quick lessons around!

@heyitsmeian Жыл бұрын

This is the most concise, accurate and informative video on soldering I've found online. Kudos to you! I'm including it as a reference in a tutorial video I made about repairing an obscure Austrian sports timing clock. Thank you so much!

@Sawta 8 жыл бұрын

I hadn't thought about taping components down. Thanks for the tip!

@illioptopede 5 жыл бұрын

I'm brand new to soldering, so this is super helpful! I have a little beginners manual and it was kinda confusing, but you've helped immensely!

@goatsticks101 3 жыл бұрын

This is an amazing tutorial!! I really appreciate how you described the chemistry and techniques so simply, Thank You!

@TisEyerish1 9 ай бұрын

Excellent video, oneTesla! Thank you so much for teaching us exactly what we need to know...no "fluff" to take up time needlessly. I can't tell you how much I value that! Kudos to you!

@JeroenLapre 6 жыл бұрын

Thank you for this tutorial. Getting back into electronics after many years. Your tutorial is an excellent refresher. =)

@stardustrelaxingvibes 4 жыл бұрын

I’ve always had reservations about soldering mainly due to many failed attempts as a teenager (pre-KZfaq, lol) I followed this beginners tutorial, absolutely spot on with the advice given & managed to repair my work tool 👌

@signalscout6020 2 жыл бұрын

A couple of “whys” mentioned here about tip-cleaning that I have not seen in other tutorials. Good quality, thank you.

@idgafa6872 4 жыл бұрын

Thank you oneTesla! Your video is clear, easy to understand and gave me the courage to do some simple soldering on my own.

@MindOverEverything 4 жыл бұрын

I watched it twice and now soldering is no longer a mystery to me. Thank you!

@robinsperanza1117 9 жыл бұрын

ty that was very informative and I actually feel like I learned something

@Lilliputian63 8 жыл бұрын

Excellent tutorial!! You mentioned things other tutorials completely neglect...simple, but important things such as in what order to remove the solder and gun. Nice! Thanks for your time.

@dertwerst 3 жыл бұрын

Great info, delivered quickly. You even talked about how long it takes to properly heat a joint, which seems to be missing from other tutorials I've watched. Thanks.

@alexyadron6609 4 жыл бұрын

I found this video-clip very helpful to me👍

@nivekkled 8 жыл бұрын

oneTesla well done. I love how you get right to the point. My soldering station is coming UPS today. Will practice what I've learned from you. Thanks

@7snowdog 7 ай бұрын

Short, simple, straight to the point. I love it! Thank you. I needed to learn soldering for my diy christmas ornaments.

@Rain1 4 жыл бұрын

This is quite useful. I'm about to do my first project by replacing the micro switches in my mouse within the next month or so and have been looking up tips for soldering. Pretty much the most concise and summarized beginner tutorial to soldering. Thanks

@hangugeohaksaeng 7 жыл бұрын

Very well made video. Your voice is easy to listen to. Thanks. :)

@chapal2548 6 жыл бұрын

Ditto

@penelopemcconnell8769 7 жыл бұрын

I love your voice! It's like I'm soldering with my best friend or sister... it makes me feel confident and comfortable, specially because I'll be soldering jewelry as a really great aficionada since I know nothing about either soldering or jewelry... Ha! I got this!

@jaiar12 11 ай бұрын

This is an amazing tutorial. Concise, clear, very helpful high-quality visuals, even shows what not to do. 10/10 all around

@eatdrinkgaming 2 жыл бұрын

I am brand new to soldering. I had watched a few how-to videos directed at beginners before finding yours, and I am glad I did! I think I have a better understanding of soldering now. Thank you!

@deganni2688 8 жыл бұрын

very helpful - thanks

@oneTesla 8 жыл бұрын

ric m You're welcome!

@NossyDrelich 8 жыл бұрын

+oneTesla thanks I learned alot. How did you make this video?

@00tonytone 8 жыл бұрын

+oneTesla im trying to fix a plasma tv that shuts off like in 20 minutes found out its the soldering points under heat sinks. i put a soldering iron on those pins but the solder doesnt melt.

@00tonytone 8 жыл бұрын

+oneTesla im trying to fix a plasma tv that shuts off like in 20 minutes found out its the soldering points under heat sinks. i put a soldering iron on those pins but the solder doesnt melt.

@00tonytone 8 жыл бұрын

+oneTesla im trying to fix a plasma tv that shuts off like in 20 minutes found out its the soldering points under heat sinks. i put a soldering iron on those pins but the solder doesnt melt.

@jSkaffaa 5 жыл бұрын

Haha the “what not to do” part, that resistor was hanging on for dear life.

@TheRationalPi 5 жыл бұрын

I took a short class on soldering technique a long time ago, but I've hardly used it since. This was a great refresher on the basics for someone who's skills have gotten rusty!

@MatthewMcClellan 3 жыл бұрын

Terrific tutorial. This was a huge help for me. Put it right to work repairing a speaker cable tonight. It went beautifully. 👍🏻

@luchighwalker7524 7 жыл бұрын

I was totally gonna make a joke about cleaning the tip, but this video was so good and informative, I refrained from doing that. thank you

@andrewford80 6 жыл бұрын

Good thing you mentioned it though, nice work.

@anon4854 5 жыл бұрын

just the tip?

@hankchinaski4651 5 жыл бұрын

That's what she said.

@wifiunlocker3182 4 жыл бұрын

kzfaq.info/get/bejne/a5-SgNOAyLWWgnk.html

@mugiherrscherofstronk8149 4 жыл бұрын

Lmao

@joyon1340 6 ай бұрын

I love your voice,

@WTomMeier 7 жыл бұрын

Excellent presentation. Quick accurate and no nonsense. Many thanks and I hope you make more instructional videos.

@Fiddler104 6 ай бұрын

Great video. Short and sweet with just enough info. Thanks

@kmcdash9755 4 жыл бұрын

I love how you said (this example is exagerrated) gahahshs like you guessed my mind hahaha

@victor8685 6 жыл бұрын

Just a tip, twist the wires together before soldering them please.

@beebopcola 3 жыл бұрын

Thanks for the close up views! A tricky bit of work, but as a viewer, it really enhanced my understanding!

@stevesohl8249 2 ай бұрын

Such an excellent, concise video! Thank you so much. So many people make long unnecessarily complicated videos and it's always appreciated to see a great, to the point tutorial.

@robertpohli5601 6 жыл бұрын

the thing they don't tell to beginners is that the copper board lies in electronic shops four month and years and builds a very nice copper oxide layer which makes the surface tension higher for the solder tin and when you use some cheap equipment the results will not be to good - so to begin you should use cream cleanser in order to remove that form the copper

@speed2998 5 жыл бұрын

When I took the NASA soldering course years ago they recommended a typist's ink eraser (the white stuff) to clean the trace before soldering. These are still available at the better stationery stores.

@shyam.invests 9 жыл бұрын

What is flux and what is it used for

@oneTesla 9 жыл бұрын

Flux is a mild acid that eats away at the oxide layer on the surface of metals. It helps solder stick to pads and wires.

@AMalas 9 жыл бұрын

oneTesla FLUX IS NOT ACID. I REPEAT, NEVER USE ACID BASED FLUX ON ELECTRONICS. USE ROSIN OR YOU ARE GOING TO HAVE A BAD DAY

@qwanom 9 жыл бұрын

ShoeGame use colophony (rosin) flux, based on tree resin! Acid flux sould be cleaned by using a pure alcohol. Acid fluxes are used for soldering an iron based wire, etc. You can find also cream like soldering paste based on rosin, liquid - rosin dissolved in alcohol and pure colophony, like a rock, yellow or red transparent. For surface mount (SMD) there is a paste with low temperature melting solder and flux, but this kind of soldering is made by hot air soldering gun or infrared stand (which is expensive).

@Iliek 7 жыл бұрын

lol the amount of disinfo out there about about soldering is just insane

@AMalas 7 жыл бұрын

Iliek Tehbut if i said something wrong correct me

@FinnGamble 2 жыл бұрын

Excellent tutorial. That's a lot of info condensed into four minutes, yet very clearly presented!

@slvpd Жыл бұрын

Excellent concise information. Thank you! I have a digital clock kit delivering this week as my first soldering project. Looking forward to learning. Your video was very helpful to me, miss.

@paulvanderveen1986 8 жыл бұрын

great video!!! (by the way you have a beautiful voice:-)

@appbigeasyreachtop 7 жыл бұрын

yes,good voice

@malasharma9427 6 жыл бұрын

I just think that's...umm Tech Voice.. cuz!! Heard the exact same sound on tonnes of other videos.. plus it's so flawless.. and is almost neutral (doesn't actually have a specific accent)

@xiadui7209 7 жыл бұрын

Can i use soldering on people? Will it hurt?

@oneTesla 7 жыл бұрын

Do not solder people. Solder is very hot and will burn the skin (not to mention that most solder contains lead, which is toxic).

@slumberlust 7 жыл бұрын

Yes, you can solder two people together, but make sure you do not use Rosin based flux for people to people connections.

@fathmasameer7523 7 жыл бұрын

Tyler Parrott lol

@xiadui7209 7 жыл бұрын

thanx

@renragged 7 жыл бұрын

You should only every solder your own eyes shut to get a good nights sleep. Other than that, never solder on people.

@richardtripp4308 5 жыл бұрын

I like this video as it covers simple basic soldering technique. Easy to understand and easy to implement.

@deniseherud 3 жыл бұрын

Ty for making a very clear and concise video for newbs.👍🏻 I’ve been doing some jewelry soldering but working on electronics seems intimidating..this was super helpful!

@mmast1898 7 жыл бұрын

Sounds like asmr

@Roger__Wilco 4 жыл бұрын

Why do Americans say "sodder", always seems so weird to hear.

@Miggy_Migg 4 жыл бұрын

I’m American and whenever I say “Soul-der” I’m correct to “sodder” by others lol. I’ve wondered this as well.

@evildiesel1709 3 жыл бұрын

same reason they say aluminum - just to be awkward:)

@MrCucitrice Жыл бұрын

I’m glad I decided to look this up on a whim. Your “what not to do” segment is how I’ve been trying to solder this whole time. Granted, I’ve not been soldering very long, but still.

@tomlinsonmichaels2040 Жыл бұрын

Perfect. Short and succinct. Got what I needed to know, pleasantly, quickly and efficiently. Thanks

@mark_cox 5 жыл бұрын

protip twist the wires together before applying soder, don't just have them side by side like in the video

@garybeard2109 5 жыл бұрын

Actually, she did it the exact way NASA recommends soldering two wires together (laying the wires next to each other without twisting them together). Tested and proven to be the strongest connection by NASA ;)

@evilklown55 5 жыл бұрын

LOL @ it's stronger to do them side-by side rather than twisting them together -- that makes zero sense. Lucky for us our intellectual betters are here to save the day.

@kagomesg7 5 жыл бұрын

@@evilklown55 idk. If NASA tells us not top dip something, I rather trust them than internet majors.

@Afootpluto 5 жыл бұрын

@@garybeard2109 not completely true. NASA has many other ways to solder two wires together, the most common is the lineman splice. The splice in this video is the lap splice and the splice in the video is not done correctly.

@garybeard2109 5 жыл бұрын

@@Afootpluto @afootpluto My comment is completely true, though it is also true, there are other ways NASA recommends soldering two wires. My reply was directed at the comment which directed people to twist the wires together before soldering. I, in no way made reference to whether the creator of this video did anything correctly or incorrectly. I simply made reference to the demonstrated method being the strongest method as per NASA. According to NASA-STD-8739.4A - 2016-06-30 page 69 line #: d. The conductors to be spliced shall not be twisted together.

@emelle1283 5 жыл бұрын

Why do American;s pronounce it SODDER instead of SOLDER. Is the army full of SODDIERS too?

@hazoomeh 5 жыл бұрын

Consult an English dictionary and you will have your answer. Good day.

@stuartg40 5 жыл бұрын

@@hazoomeh In the UK, the 'l' in solder is pronounced. If you discover how the Americans came to believe it was silent, please let me know. "Sole-der", as with "sole-juh" (soldier) is the norm where the English language was created, although it can occasionally be heard pronounced as "sol-der", with a short 'o'.

@KnuckleHunkybuck 5 жыл бұрын

Are you saying that Americans don't know how to talk correctly? If while reading that sentence, you didn't pronounce the word "talk" the same as you would pronounce the word "talcum", you aren't terribly consistent with your pronunciation either. If you're going to talk the talk, you should walk the walk.

@stuartg40 5 жыл бұрын

@@KnuckleHunkybuck Clearly not. I merely expressed a knowledge of the linguistic divide created by the span of the Atlantic. As you ought to know, the English language is rife with pronunciation discrepancies, so your example is void. Don't get defensive: I stated a fact and asked how it came to be that the American pronunciation differs from that of the English that gave the USA its (now bastardised) language.

@KnuckleHunkybuck 5 жыл бұрын

+Stuart Black Uh, I was replying to Em Elle's original comment. My very point was that there are discrepancies, therefore her(?) ascertainment that "solder" should be pronounced the same as "soldier" was moot. If you don't pronounce the "l" in "talk", "walk", "balk", or "stalk", clearly a silent "l" is very much a part of the English language.

@amgadghaly6218 7 ай бұрын

A very concise, straight to the point, pleonasm-free video, thx from Hurghada, Egypt

@blessedmeadow9624 7 ай бұрын

Great video and very concise. I agree with some of the other comments about how other sites drone on and on. No one wants to hear that; we just want the information we came for. You gave us what we were looking for and still had time to show us some pitfalls to avoid... all within a few minutes. Great job again!

@paulgeare6035 3 жыл бұрын

Great tutorial. Clear, concise, and useful.

@jayc3110 5 жыл бұрын

An excellent lesson. Very clear and crisp. Thank you.

@bobbypropes5346 7 ай бұрын

Hey, this was SUPER helpful. Great video. Thanks for being so clear & concise. The “what not to do” example as also super helpful. Cheers!

@mikey19468 3 жыл бұрын

I literally just decided to pick up Soldering to work on electronics and this cleared up SOOOO much for me! Thank you a ton!

@TartanOfficial 8 ай бұрын

I’ve started repairing broken controllers, soldering is something I knew I needed to learn to be able to get the most out of the broken parts and pieces I have. Thank you for the great tutorial :)

@Valcuda 2 жыл бұрын

Yesterday was my first time soldering, and I just assumed you out the solder on the iron itself. Honestly, this video is an amazing help! And I'm sure if I watched it before I soldered yesterday, it would've looked a lot better XD Thanks so much for the video!

@Johnwould1 2 жыл бұрын

What a perfectly explained and succinct tutorial. Thank you!

@mrwishe Жыл бұрын

This was wonderfully clear. Thank you for your time spent on teaching this to us newbies. Lots of great info I didn't get from watching others!

@52McCoy 5 ай бұрын

Thank you for this video!! I will be doing some soldering for the first time and your video cleared up most of the confusion from what my buddies were explaining to me

@katateochi 7 ай бұрын

Excellent tutorial. Short, clear and concise. Nice.

@6lu5ky86 2 жыл бұрын

Thanks for this! I recently got a job assembling guitar effects pedals, exciting. I've improved a lot!

@redstickham6394 4 жыл бұрын

I haven't soldered in a long time and this was a nice refresher. Thanks!

@freshgresh 2 ай бұрын

Excellent video. You actually get to the point! Really appreciate the close ups also. 10/10

@groggysword33 6 ай бұрын

Thank you for explaining what Rosin Core Solder does. No other videos that are beginner oriented that I’ve seen, have done that.

@lettherebepiece7184 8 жыл бұрын

Hi,You have done a brilliant soldering tutorial here,This has been one of the clearest close ups `with clear instructions also covered a few issues that put things in a most understanding way. Well done this is how a video should be done.

@anthonyindrieri358 2 жыл бұрын

Haven't done this since high school. Great refresher.

@joelovitt3299 2 жыл бұрын

This is the ONLY decent and concise tutorial for soldering that I found online. Thanks for knowing what you're doing and having great presentational skills!

@Roarmeister2 2 жыл бұрын

Meh, I've seen a dozen better videos out there.

@ValgniTehki 2 ай бұрын

I'm new to soldering and have watched several videos showing people how to solder. They never have the camera close enough so I can never see what being done. Also, they don't half go on and on about a lot of crap. This video was simple, to the point and filmed so we could actually see how to solder. Much appreciated!

@mikeabernathy6201 3 жыл бұрын

Plain, simple and to the point. THANKS.

@LookingIntently 6 жыл бұрын

That was really helpful. I'm about to solder wire leads to speaker connectors - and I've never soldered before! I feel pretty confident after watching this. Thanks!!

@DerpypawsProductions Жыл бұрын

This simple approach with no overthinking allowed me to learn basic soldering and do a successful project. Thanks!

@squidstowaway5146 Жыл бұрын

I am soldering for the first time (since high school electronics) building the Sanni Cart Reader. Thank you for the tutorial!

@virginiaray2145 5 ай бұрын

Thank you for your step by step precise instructions. I feel confident as a first time user of a soldering tool, that everything will turn out well.

@muhammadshafiqulhoqakand9852 4 жыл бұрын

A very good tutorial for the beginners. Thank you so much.

@katherinejankowski1997 3 ай бұрын

Great video, well explained, and I especially appreciate that you show a wrong way example at the end with an explanation of why. Thank you!

@jayuihlein1664 6 жыл бұрын

Excellent tutorial! Thank you. Now, I think I can do this effectively. Best wishes!

@jacobernardo7065 Ай бұрын

Easily understood and well explained! Thank you!

@cldel66 Жыл бұрын

Excellent - just what I was looking for! Thank you.

@dennisroland5654 2 жыл бұрын

Splendid in every way! Thank you.

@thundercourage 2 жыл бұрын

What an Awesome introduction to soldering.

@KristofferYiFredriksson 2 жыл бұрын

Thank you for a very clear and concise tutorial.

@michaelpfister1283 2 жыл бұрын

Great beginner tutorial! You are the first person who has explained what the sponge is for! LOL Appreciate it greatly, I now feel confident to try my first solder joint on an old model railroad engine I am trying to put back in service. :-)

@ezwires 3 ай бұрын

very straight forward and easy to understand steps. 10/10

@kirafawkes6529 13 күн бұрын

I'm supposed to start learning how to solder soon, and this video gave me more confidence in my first try, thank you. ☺️ Slow and concise, not too slow or convoluted. 👌