Solid Edge 2023 Tutorial - Exercise 1 (Updated)

No video

Solid Edge 2023 Tutorial - Exercise 1 (Updated)

Рет қаралды 37,942

The Design Engineer

Күн бұрын

Пікірлер: 50

@gyoussef 6 ай бұрын

I just started using solid edge and this is a great tutorial. I thought it was really easy to follow along. I hope you continue to make more you have a great channel.

@drmseif 6 ай бұрын

Thank you so much for the feedback. I am glad you found it useful.

@leroytrio5227 11 ай бұрын

This is proving to be the best tutorial I've found. I've used full blown Acad for 23 years and was finding the transition difficult till now. Thank you.

@drmseif 11 ай бұрын

Thank you so much for the feedback. I am glad that you find it interesting 😊 .

@dreamp3312 10 ай бұрын

Very detailed and understandable video. Thank you for educating us!

@drmseif 10 ай бұрын

Thank you for the comment. I am glad you find it useful.

@zoukiller360tv5 11 ай бұрын

Thanks for the help I am just trying out Solid Edge for the first time after being in Autocad software for so many years but I was able to follow your instructions thanks again. now I need to learn where all the buttons are in Solid Edge

@drmseif 11 ай бұрын

Thank you for reaching out. Please feel free to ask for any materials you need to help you. Wishing you all the success.

@mikesanderson5325 Жыл бұрын

Hello, I don't usually comment on youtube at all, but I wanted to thank you for sharing your guide. Your video is valuable not only because there is little material about Solid Edge, but also because it's pretty well made :) Thanks again!

@mikesanderson5325 Жыл бұрын

Could you tell me how you got 22 at 9:55 ? The only calculation i got is 17 in the center but I dont know how did you know to add 5 ? Without this information I follow your way from 1st verison of this exercise where you made extra plane but method form 2nd version is quicker.

@drmseif Жыл бұрын

Thank you so much for your kind words. I really appreciate it.

@drmseif Жыл бұрын

@@mikesanderson5325 Actually, any dimension between 17 and 27 should work. I chose 22 to be in the middle and make sure I have solid contact. This way, you do not need actual calculations and the part will be finished without any problem.

@federicomelana6869 10 ай бұрын

clear and efficient, very good editated video. totally perfect. thank you!

@drmseif 10 ай бұрын

Thank you so much for the feedback. I am glad you find it interesting.

@Luczr270 8 ай бұрын

Excellent and very clear tutorial. Thank you.

@drmseif 8 ай бұрын

Thank you so much for your feedback. I am glad you find it interesting.

@innocaddesignstudio4175 7 ай бұрын

Sir you are very much honest while doing this

@plasticbuzzardmodelshop9715 6 ай бұрын

Refreshing my memory.

@drmseif 6 ай бұрын

Thank you so much for the feedback.

@jessysingh6687 Жыл бұрын

I like the style of your instructions. I had to replay various segments of the video just to figure out what option you clicked along the toolbar. THEN, I replayed the same segments to figure out what I did wrong. However, near the end of the video, I finish the object without the video played in the background. I will follow through your other videos. Eventually, I hope to get to a video where you edit an attribute of a finished object.

@drmseif Жыл бұрын

Thank you so much for your kind remarks. To answer your request, please watch the following video: kzfaq.info/get/bejne/n7CUec5ku8yweZ8.html

@robertqueberg4612 Жыл бұрын

I thank you sir, for the instructions along with the video lesson. I am beginning to get a grasp on what needs to be done.

@tonderaimatsungo8298 6 ай бұрын

Great skills there, a picked up a few tricks.

@kalinkakylab7276 5 ай бұрын

Thank you very much.. Excellent Tutorials

@drmseif 5 ай бұрын

Thank you so much for the feedback. I am glad you found it useful.

@EliteTKDAust Жыл бұрын

Thank you for a great tutorial.

@drmseif Жыл бұрын

Thank you for your feedback. I am glad you find it interesting

@mustafax5165 Жыл бұрын

Your channel is awesome thanks from Turkey

@drmseif Жыл бұрын

Thank you so much for the comment. I am glad you find it interesting.

@ammarkamil6526 10 ай бұрын

Dear Dr. Mohammed, Thanks for sharing those videos, Can you please create a video explaining the difference between SE 2022 and the new SE 2023, I used to be able to work on SE using my SW and Inventor Experience, but now I find it very difficult, I use Se to create a basic geometry to run CFD using FloEFD.

@jjca06 Жыл бұрын

nice im done ready for no. 2. thank you

@drmseif Жыл бұрын

Thank you so much for the feedback. I am glad you find it useful.

@jjca06 Жыл бұрын

@@drmseif thank you so much your video...

@exoZelia 10 ай бұрын

FYI - I don't know if this is a Community Edition thing or just an update since this was posted, the "Draw" area with "Line" and "Circle by Center point" is now in the "Features" tab (not home) and renamed to Sketch. Had to pause at the very first instruction cause I couldn't find it. Not the tutorials fault, either a CE thing or just the devs moving the UI around for no reason other than to make tutorials outdated

@nams37 Жыл бұрын

Thank you

@drmseif Жыл бұрын

You are more than welcome. Thanks.

@JBCool0729 Жыл бұрын

Thanks for f..ken answer on my question.

@JBCool0729 Жыл бұрын

I have a question. Does Solid Edge has a editable cross section? What I mean that I would like to create stuff that they are inside let say a valve and I need to do some brackets and holes inside that valve. Most of the cad programs that I know can split the part in half or any other place that it will be easy to start sketching. Im new to this program but that what they want me to use.

@shahidshad-sx1pi 2 ай бұрын

hi thanks for the video, can you please help me in how to print in all the 3 views, once we finish creating the diagram.

@olivermsiska5780 7 ай бұрын

Hi can you help me on editing dimensions,it seem to be locked,the other thing is there are many lines when am drawing,

@drmseif 7 ай бұрын

Please email the file to mohamed.seif@aamu.edu with an explanation of what is needed, and I will try to do my best to respond promptly. Or we can either Zoom or team; I am US Central time.

@Fizzy-Bubblech 5 ай бұрын

R12 is missing

@gagandeepsinhvaghela8600 Жыл бұрын

How to edit sketch and protrusion in solidedge like creo ??

@drmseif Жыл бұрын

This will be answered soon by showing how to edit any modeling (done using any software, and not only Solid Edge).

@Nicky-vm6zn Жыл бұрын

What do you call that object and what can it be used for ?

@drmseif Жыл бұрын

I call it intermediate shaft support. It is used when you have a long shaft that needs support to minimize its vibration or increase its overall stiffness (natural frequency).

@Fumista5721 Жыл бұрын

Complimenti per i video, ho scaricato e installato solid edge da poco, e non riesco ad avere on punto di cattura sull'origine degli assi come si vede nei suoi video ha qualche consiglio da darmi? indicarmi o se devo abilitare qualche impostazione? La rigrazio.

@ahmednessim4429 Жыл бұрын

What is the difference between solidedge and SOLIDWORKS?

@peterllewellyn8191 10 ай бұрын

@ahmednessim4429 The main difference is the synchronous capabilities that Dr. Seif is sharing on this channel. No other product has the ability to create or edit in this manner. (1) Modeling is face centric not sketch dependent (saved to a node for later if needed) (2) Features can be rearranged to without destroying the integrity of the model (3) IN a synchronous assembly, you can select multiple faces within several parts of that assembly and move at the same time. No need to IPA in each part. (4) Parasolid kernel will remain our core geometry engine. (5) Solid Edge can open any file directly into synchronous. To illustrate the obvious production benefits of synchronous vs. ordered (history based) Please review this video: kzfaq.info/get/bejne/acikldaKnJ_Nepc.html For more information on Synchronous: solidedge.siemens.com/en/solutions/products/3d-design/synchronous-technology/ Hope this helps,

@MSM5500 2 ай бұрын

@@peterllewellyn8191 "No other product has the ability to create or edit in this manner. " Really? Ansys SpaceClaim, IronCAD SpaceClaim is runs on ACIS kernel, IronCAD uses both ACIS & Parasolid.